Hi everyone i have a problem with i2c sensor on Gygabyte motherboard with nforce3 chipset and athlon64 CPU, i have installed debian amd64 and lm-sensors
I have compiled built-in i2c-core i2c-dev and i load as modules on boot
i2c-nforce2
i2c-isa
i2c-amd756 with success
but when i launch sensors the output is:
No sensors found!
if i run i2cdetect this is output:
i2c-2 dummy ISA main adapter ISA bus algorithm
i2c-1 unknown SMBus nForce2 adapter at 2000 Algorithm unavailable
i2c-0 unknown SMBus nForce2 adapter at 1c00 Algorithm unavailable
All availables algorithms in kernel config are compiled built-in!!!
What's wrong???
sensor-detect output:
Next adapter: SMBus nForce2 adapter at 2000
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x08
Client found at address 0x4e
Probing for `National Semiconductor LM75'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Analog Devices ADM1021'... Failed!
Probing for `Analog Devices ADM1021A/ADM1023'... Failed!
Probing for `Maxim MAX1617'... Failed!
Probing for `Maxim MAX1617A'... Failed!
Probing for `TI THMC10'... Failed!
Probing for `National Semiconductor LM84'... Failed!
Probing for `Genesys Logic GL523SM'... Failed!
Probing for `Onsemi MC1066'... Failed!
Probing for `Maxim MAX1619'... Failed!
Probing for `National Semiconductor LM82/LM83'... Failed!
Probing for `Maxim MAX6659'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Next adapter: SMBus nForce2 adapter at 1c00
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x08
Client at address 0x50 can not be probed - unload all client drivers first!
Client at address 0x51 can not be probed - unload all client drivers first!
Do you want to scan the ISA bus? (YES/no): YES
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Success!
(confidence 8, driver `it87')
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
next i choose smbus and i receive this message:
# I2C chip drivers
# Warning: the required module it87 is not currently installed on your system.
# If driver is built-in to the kernel, or unavailable, comment out the following line.
it87
thx and sorry for my english
