I get this output when I try to burn cd in .iso mode. Any help will be appreciated

Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 240s
Writing time: 0.017s
Average write speed 999.0x.
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
Fixating time: 0.002s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

This is my cdrecord -scanbus output

scsibus0:
0,0,0 0) 'LG ' 'CD-RW CED-8083B ' '1.06' Removable CD-ROM

Hi,

you can try the --force option to correct these problems.

Sometimes i've got the same problems with no-name CD-R(W)s where the manufactor and size information isn't (correctly) set ...

Also in some versions of cdrecord it can't set some options in the CD-Recorder, can also be fixed by --force ...

cu

thanks