Hello there:
I got a dvd-writer and I run everything on linux and I am tired of switching to windows just to burn an iso file, I configured everything and the dvd-writer burns cds, burn I can't burn dvds.
What file do I have to edit to add the cdrecord-dvdpro security key?
I tried to add it under xcdroast but no luck at all, any ideas on how to burn iso dvds?
I also tried to do it with drecord dev=0,0,0 -v speed=2 file.iso but i got the following
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent default
s.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01a28 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schillin
g
TOC Type: 1 = CD-ROM
cdrecord: Operation not permitted. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.30
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.0B'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011 (current)
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at
ftp://ftp.ber
lios.de/pub/cdrecord/ProDVD/
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at
ftp://ftp.ber
lios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD/DVD driver (checks media) (mmc_cd_dvd).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3935 MB
Total size: 4519 MB (447:46.58) = 2014994 sectors
Lout start: 4520 MB (447:48/44) = 2014994 sectors
Current Secsize: 2048
cdrecord: Unspecified command not implemented for this drive.
cdrecord: Data will not fit on any disk.
cdrecord: Cannot write more than remaining DVD capacity.
Any ideas?
Thank you very muchc
