Good day,

I using ubuntu 14.04 LTS - Trusty version and my usb key doesn't works when it mounted.

Please find the Message got : unable to execute the specified command. The file or folder file: // media / dennis / EOF6-31C3 does not exist

Thanks so much to help me for finding the solution with this current problem. Dennis : dgf@mailoo.org

I would not post my email in a public forum.

Which command did you issue? Or, what exactly did you do to cause this error message?

Yes. What command gave you the error?
And please use copy/paste, in code tags, to show us the error. I seriously doubt there were spaces around the slashes...

You can edit your OP to remove your email address...private replies is not how LQ works...
Welcome!

Good day my friends ,

Your problem sounds like there is directory at /media/dennis/EOF6-31C3 and there is nothing bootable actually attached to that directory, or the physical device attached there is just , well, empty. When you mount the USB device, open a terminal and enter
Code:
dmesg


Thanks so much for your solutions.
Friendly
Denocean

-------------------------------------------------------------------------------------------------------------------------------------



[ 2.989670] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.989722] ehci-pci 0000:00:12.2: debug port 1
[ 2.989795] ehci-pci 0000:00:12.2: irq 17, io mem 0xf044d000
[ 2.999352] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.999498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.999505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.999510] usb usb1: Product: EHCI Host Controller
[ 2.999515] usb usb1: Manufacturer: Linux 4.4.0-148-generic ehci_hcd
[ 2.999519] usb usb1: SerialNumber: 0000:00:12.2
[ 3.000186] hub 1-0:1.0: USB hub found
[ 3.000211] hub 1-0:1.0: 5 ports detected
[ 3.001037] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.001053] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.001064] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.001115] ehci-pci 0000:00:13.2: debug port 1
[ 3.001172] ehci-pci 0000:00:13.2: irq 17, io mem 0xf044b000
[ 3.011353] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.011534] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.011541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.011546] usb usb2: Product: EHCI Host Controller
[ 3.011551] usb usb2: Manufacturer: Linux 4.4.0-148-generic ehci_hcd
[ 3.011555] usb usb2: SerialNumber: 0000:00:13.2
[ 3.012194] hub 2-0:1.0: USB hub found
[ 3.012219] hub 2-0:1.0: 5 ports detected
[ 3.013098] ehci-platform: EHCI generic platform driver
[ 3.013147] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.013169] ohci-pci: OHCI PCI platform driver
[ 3.013542] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.013558] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.013619] ohci-pci 0000:00:12.0: irq 18, io mem 0xf044e000
[ 3.071478] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.071489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.071494] usb usb3: Product: OHCI PCI host controller
[ 3.071499] usb usb3: Manufacturer: Linux 4.4.0-148-generic ohci_hcd
[ 3.071503] usb usb3: SerialNumber: 0000:00:12.0
[ 3.072197] hub 3-0:1.0: USB hub found
[ 3.072292] hub 3-0:1.0: 5 ports detected
[ 3.073036] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.073052] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 3.073106] ohci-pci 0000:00:13.0: irq 18, io mem 0xf044c000
[ 3.131448] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.131459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.131464] usb usb4: Product: OHCI PCI host controller
[ 3.131469] usb usb4: Manufacturer: Linux 4.4.0-148-generic ohci_hcd
[ 3.131474] usb usb4: SerialNumber: 0000:00:13.0
[ 3.132157] hub 4-0:1.0: USB hub found
[ 3.132253] hub 4-0:1.0: 5 ports detected
[ 3.133273] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.133289] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 3.133356] ohci-pci 0000:00:14.5: irq 18, io mem 0xf044a000
[ 3.191440] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.191452] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.191457] usb usb5: Product: OHCI PCI host controller
[ 3.191462] usb usb5: Manufacturer: Linux 4.4.0-148-generic ohci_hcd
[ 3.191466] usb usb5: SerialNumber: 0000:00:14.5
[ 3.192147] hub 5-0:1.0: USB hub found
[ 3.192242] hub 5-0:1.0: 2 ports detected
[ 3.192584] ohci-platform: OHCI generic platform driver
[ 3.192627] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.193078] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 3.193095] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 3.193319] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[ 3.193621] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.193626] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.193631] usb usb6: Product: xHCI Host Controller
[ 3.193636] usb usb6: Manufacturer: Linux 4.4.0-148-generic xhci-hcd
[ 3.193640] usb usb6: SerialNumber: 0000:00:10.0
[ 3.194302] hub 6-0:1.0: USB hub found
[ 3.194349] hub 6-0:1.0: 2 ports detected
[ 3.194744] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 3.194756] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 3.196724] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.196785] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.196791] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.196796] usb usb7: Product: xHCI Host Controller
[ 3.196800] usb usb7: Manufacturer: Linux 4.4.0-148-generic xhci-hcd
[ 3.196804] usb usb7: SerialNumber: 0000:00:10.0
[ 3.197434] hub 7-0:1.0: USB hub found
[ 3.197498] hub 7-0:1.0: 2 ports detected
[ 3.197973] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.200193] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.200206] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.201063] mousedev: PS/2 mouse device common for all mice
[ 3.202362] rtc_cmos 00:01: RTC can wake from S4
[ 3.202646] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.202734] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 3.202766] i2c /dev entries driver
[ 3.202936] device-mapper: uevent: version 1.0.3
[ 3.203238] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 3.203283] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.204307] NET: Registered protocol family 10
[ 3.204895] NET: Registered protocol family 17
[ 3.204950] Key type dns_resolver registered
[ 3.205630] microcode: CPU0: patch_level=0x0500010d
[ 3.205648] microcode: CPU1: patch_level=0x0500010d
[ 3.205809] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.206517] registered taskstats version 1
[ 3.206557] Loading compiled-in X.509 certificates
[ 3.209423] Loaded X.509 cert 'Build time autogenerated kernel key: 058413b87ef5b81c39c44b09facd120b1e2356ac'
[ 3.209502] zswap: loaded using pool lzo/zbud
[ 3.215896] Key type trusted registered
[ 3.218743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.228889] Key type encrypted registered
[ 3.228919] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.228932] ima: No TPM chip found, activating TPM-bypass!
[ 3.228955] ima: Allocated hash algorithm: sha1
[ 3.228998] evm: HMAC attrs: 0x1
[ 3.229832] Magic number: 12:111:541
[ 3.230103] rtc_cmos 00:01: setting system clock to 2020-03-26 16:30:39 UTC (1585240239)
[ 3.230442] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.230651] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.230655] EDD information not available.
[ 3.230847] PM: Hibernation image not present or could not be loaded.
[ 3.234266] Freeing unused kernel memory: 1488K
[ 3.243344] Write protecting the kernel read-only data: 14336k
[ 3.245424] Freeing unused kernel memory: 1832K
[ 3.245922] Freeing unused kernel memory: 48K
[ 3.293791] systemd-udevd[108]: starting version 204
[ 3.323164] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 3.340940] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.341076] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 3.343655] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.343780] acpi device:00: registered as cooling_device6
[ 3.343935] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[

Your problem sounds like there is directory at /media/dennis/EOF6-31C3 and there is nothing bootable actually attached to that directory, or the physical device attached there is just , well, empty. When you mount the USB device, open a terminal and enter
Code:
dmesg
The last few lines should reflect what happens when you mount the USB device. See how it identifies the device.

Good day My friends,

My problem with my USB Key failure in attachment ( txt) below

My problem sounds like there is directory at /media/dennis/EOF6-31C3 and there is nothing bootable actually attached to that directory, or the physical device attached there is just , well, empty. When you mount the USB device, open a terminal and enter

Code:
dmesg

The last few lines should reflect what happens when you mount the USB device. See how it identifies the device.

Thanks so much for your kind solutions.
Friendly
Denocean

Attached Files

USB KEY FAILURE.txt (75.2 KB, 7 views)

My problem sounds like there is directory at /media/dennis/EOF6-31C3 and there is nothing bootable actually attached to that directory, or the physical device attached there is just , well, empty. When you mount the USB device, open a terminal and enter
Code:
dmesg
The last few lines should reflect what happens when you mount the USB device. See how it identifies the device.

Good day my friends,

Thanks so much for your kind replies about the spaces and slashes mistakes.
I made a mistake in copy but isn't the usb key failure problem. Sorry.

unable to execute the specified command. The file or folder file://media/dennis/EOF6-31C3 does not exist


Please in attachment in ( txt) that shows my problem.

Thanks so much for your advice and solutions.
Denocean

Attached Files

USB KEY FAILURE.txt (75.2 KB, 9 views)

OP: you probably already know this but Trusty has been EOL for almost a year.

This is the key error message. If there isn't critical data stored on your USB drive try running the fsck command below. That might repair the filesystem and allow it to mount but files may have been corrupted or lost.

sudo fsck.vfat /dev/sdb1

Otherwise some other data recovery tool could be better suited.

Thanks so much for your reply. Never know before. Thanks .
Do you mean it's trusty the problem for my usb key ?

Thanks so much for your kind reply for a solution.
Please find the reply below ; no file.


dennis@dennis-SATELLITE-C850D-11R:~$ sudo fsck.vfat /dev/sdb1

fsck.fat 3.0.26 (2014-03-07)
open: Aucun fichier ou dossier de ce type
dennis@dennis-SATELLITE-C850D-11R:~$ sudo fsck.vfat /dev/sdb1
fsck.fat 3.0.26 (2014-03-07)
open: Aucun fichier ou dossier de ce type
dennis@dennis-SATELLITE-C850D-11R:~$
dennis@dennis-SATELLITE-C850D-11R:~$

Question : Do I need to mount the usb key before to make sudo fsck.vfat /dev/sdb1 ?

No, it must be unmounted.

I don't know. The output of the dmesg command indicates it should be. If recognized should also be in the output of the command
lsblk