Ubuntu- 10.04 doesn't mount sansa clip+
Hey guys!
my Lucid lynx doesn't mount
my mp3 player,its already
setup in USB-MODE as MSC , but it doesn't
show it in desktop, or media folder,
or mnt folder or under file system!!
my usb is detected
this is my lsusb output:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0781:74d1 SanDisk Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
my dmesg output:
[ 33.343314] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 33.343336] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 33.343407] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 43.544011] eth0: no IPv6 routers present
[ 49.712263] end_request: I/O error, dev fd0, sector 0
[ 61.868551] end_request: I/O error, dev fd0, sector 0
[ 3548.176351] hub 1-0:1.0: unable to enumerate USB device on port 5
[ 3550.812034] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 3555.944083] usb 1-5: unable to read config index 0 descriptor/start: -110
[ 3555.944090] usb 1-5: chopping to 0 config(s)
[ 3565.944283] usb 1-5: string descriptor 0 read error: -110
[ 3565.944451] usb 1-5: no configuration chosen from 0 choices
my mpt-tool output: (when setup in MPT mode)
mtp-detect
libmtp version: 1.0.2
Listing raw device(s)
Device 0 (VID=0781 and PID=74d0) is a SanDisk Sansa Clip+.
Found 1 device(s):
SanDisk: Sansa Clip+ (0781:74d0) @ bus 1, dev 17
Attempting to connect device(s)
LIBMTP PANIC: Unable to find interface & endpoints of device
Unable to open raw device 0
OK.
please I need help!!!
Last edited by faby1321; 05-22-2010 at 03:11 PM.
|