Linux - NewbieThis Linux forum is for members that are new to Linux.
Just starting out and have a question?
If it is not in the man pages or the how-to's this is the place!
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
I've just installed mandrake 8 on my machine, but i cant set the monitor properly. It's a samsung 151 TFT monitor (15") and the graphics card is an nVIDIA GeForce2 64 Ti
I've hada fiddle testing the different monitors but all i can get is either a blue pattern which scrolls down the screen or the monitor goes into standby mode
You may have a problem with your Graphics Card. At what point do you stop seeing anything during the boot process? You should see Linux booting up? Also, what Distro are you using?
My grapics card is quite new out it's a nVIDIA GeForece2 Ti, it's specially designed for flat panel (TFT) monitors. I've had a look on the website and i've found the latest drivers to download, which i have downloaded and wrote them to disk. The website also has a nice step by step guide on how to install them, but this is only good when i can see the screen
The monitor goes into standby mode after Linux has finished booting up. I'm using Mandrake 8.0, the login screen briefly appears (0.2 secs) but the monitor then goes into standby mode. However the first time installed it, it worked but since i reinstalled it - long story i have not been able to remember which video settings i used.
Location: Rome, Italy ; Novi Sad, Srbija; Brisbane, Australia
Distribution: Ubuntu / ITOS2008
Posts: 1,207
Rep:
Ok i think i know what the problem is. The monitor cant handle the frequencies you set up in the XF86Config to be used and it turns into standby as soon as it tries them to prevent from damaging itself. I assume mandrake goes directly to X when it's finished booting. You have to get to console. Boot Linux up and when its finished and your screen turns off press ctrl+alt+backspace to kill the X server (this is hopefully working!) now turn your monitor back on and you should be in console. Now just edit XF86Config or run xf86config to re-configure X, make sure you use conservative settings, and if they work you might want to try to increase them gradually. I suggest you choose the lowest settings first. (low horiz sync, and vert refresh rates and only 800x600 @ 16 bit and later increase them to see if it will work). There that should get you going.
I've tried accessing the console but the problem remains as i thought it would (it's not setup to go straight into x). I've tried using a custom monitor set up as suggested by the previous guy but this still does not work - this was done during a reinstall. However i did manage to catch the error codes that were being produced.
/tmp/imm.0: init_module: No Such Device
/tmp/ppa.0: init_module: No Such Device
Those were displayed on a black screen (this is during the monitor test which shuts down the monitor) followed by a message on the configure x screen again saying (**) SVGA 24 SBP or something is not supported for this chipset
Also something i noticed when i crashed my computer before (i had left the linux install disk in during restarting it and then tried to avoid installing it again) but the monitor was listed as EGA/VGA is that any help as to what the monitor settings should be??
All joking apart, if at all possible, could you try going up to Mandy 8.1? I had problems with my Eizo monitor (which is actually quite old) under 7.2 and 8.0, but all seems to be hunky-doorey now that I'm running 8.1. Just a thought.
under xf86 4.x geforce chips when unaccelerated should be using the nv driver i think. i have a samsung SyncMaster 560V tft running on a geforce 2 mx.
here is my config file, but *DO NOT* use this without editting as yours will mostly be different.
Here are the module, monitor and video card parts of mine.
Section "Device"
BoardName "AutoDetected"
Driver "nv"
# This bit above needs to be changed to "nvidia" once you have the new drivers installed which you downloaded, but this will do for 2d
Identifier "Device[0]"
Option "dpms"
VendorName "AutoDetected"
EndSection
OK i've got it half working i've used a different monitor to update the drivers and now i can see my tft monitor now. YEY!!
However i still cant get it to start up x. Same problem occurs the monitor switches off. I've run the xf86config and this seems to make no difference, can anyone point out as to where i can find the actual config file so i can edit it accordingly. I know it must be in the etc/X11/ directory but i'm not sure of the filename.
The file you need it /etc/X11/XF86Config or /etc/X11/XF86Config-4 depending on the version of Xfree86 that you installed. MDK 8 defaults to version 4 I think.
Have you installed the GeForce drivers? I think you should cus on my machine Linux wont work without them.
I have installed them but still i cannot see past the console window. I had to use another monitor so i could get into the console and install the new drivers - which was actually quite fun.
Have you managed to change the settings in the XF86Config file yet? You may have not configured the monitor correctly, setting the values for the monitor is quite important. I would check the maker of the monitor to see if will work with Linux, or there known problems.
Any pointers as to where i may find out if it (mandrake 8.0) is or is not compatible with my monitor. The monitor itself is a Samsung SyncMaster 151D i've had a look on the website and .. nothing!! So that aint much help. I've set up xf86 using the drak86 or something i had the name of the prog written sum where ... not sure where it is tho.
Anyway i set the vert and horizontal settings to that of a similar samsung monitor still no change.
I'm not sure on how to view the actual config file, i've tried /etc/X11/XF86Config and all combinations of capitalisation but still it wont find it i've also used cd /etc/X11/ and then XF86Config and still it dont work i've also used the command for viewing the contents of the /etc/X11 folder but to be honest i dont have a clue on what it means.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.