I got these messages:
Code:
rrdcached[1725]: flushing old values
Jan 30 22:10:59 pve rrdcached[1725]: rotating journals
Jan 30 22:10:59 pve rrdcached[1725]: started new journal /var/lib/rrdcached/journal/rrd.journal.1580458259.514261
Jan 30 22:10:59 pve rrdcached[1725]: removing old journal /var/lib/rrdcached/journal/rrd.journal.1580451059.514255
Jan 30 09:36:59 pve smartd[1242]: Device: /dev/sdb [SAT], 8 Currently unreadable (pending) sectors
Jan 30 09:36:59 pve smartd[1242]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 76 to 75
Jan 31 00:10:11 pve kernel: ata2: COMRESET failed (errno=-16)
Jan 31 00:10:11 pve kernel: ata2: limiting SATA link speed to 1.5 Gbps
Jan 31 00:10:11 pve kernel: ata2: hard resetting link
Jan 31 00:10:16 pve kernel: ata2: COMRESET failed (errno=-16)
Jan 31 00:10:16 pve kernel: ata2: reset failed, giving up
Jan 31 00:10:16 pve kernel: ata2.00: disabled
Jan 31 00:10:16 pve kernel: ata2: EH complete
Jan 31 00:10:16 pve kernel: sd 1:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jan 31 00:10:16 pve kernel: sd 1:0:0:0: [sdb] tag#27 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
Jan 31 00:10:16 pve kernel: blk_update_request: I/O error, dev sdb, sector 0
I ran a full scan
Code:
smartctl -t long /dev/sdb
and got this result:
Code:
root@pve:~# smartctl -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.17-2-pve] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA200
Serial Number: 73TTML1GS
LU WWN Device Id: 5 000039 ff3d949eb
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Jan 31 07:20:59 2020 HST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 119) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (15109) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 252) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 091 091 016 Pre-fail Always - 1376291
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 70
3 Spin_Up_Time 0x0007 126 126 024 Pre-fail Always - 301 (Average 301)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 82
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 109
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 49700
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 68
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 129
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 129
194 Temperature_Celsius 0x0002 253 253 000 Old_age Always - 20 (Min/Max 11/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 151
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 164 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 164 occurred at disk power-on lifetime: 49601 hours (2066 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 e7 50 08 Error: UNC at LBA = 0x0850e700 = 139519744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e8 00 e7 50 40 00 4d+13:40:31.609 READ FPDMA QUEUED
60 08 d0 00 10 20 40 00 4d+13:40:31.609 READ FPDMA QUEUED
61 08 c8 a8 ab 4d 40 00 4d+13:40:31.609 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 4d+13:40:31.607 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 4d+13:40:31.607 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 163 occurred at disk power-on lifetime: 49601 hours (2066 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 e7 50 08 Error: WP at LBA = 0x0850e700 = 139519744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 a0 a8 ab 4d 40 00 4d+13:40:28.149 WRITE FPDMA QUEUED
60 08 98 00 10 20 40 00 4d+13:40:27.792 READ FPDMA QUEUED
60 08 90 00 e7 50 40 00 4d+13:40:27.756 READ FPDMA QUEUED
60 08 88 78 c0 c1 40 00 4d+13:40:27.756 READ FPDMA QUEUED
60 08 80 70 c0 c1 40 00 4d+13:40:27.756 READ FPDMA QUEUED
Error 162 occurred at disk power-on lifetime: 49601 hours (2066 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 e7 50 08 Error: UNC at LBA = 0x0850e700 = 139519744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d8 00 e7 50 40 00 4d+13:40:22.829 READ FPDMA QUEUED
60 08 c0 08 e2 46 40 00 4d+13:40:22.829 READ FPDMA QUEUED
61 80 b8 38 4f a7 40 00 4d+13:40:22.829 WRITE FPDMA QUEUED
61 40 b0 10 27 f4 40 00 4d+13:40:22.829 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 4d+13:40:22.825 SET FEATURES [Enable SATA feature]
Error 161 occurred at disk power-on lifetime: 49601 hours (2066 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 e7 50 08 Error: WP at LBA = 0x0850e700 = 139519744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 90 10 27 f4 40 00 4d+13:40:18.981 WRITE FPDMA QUEUED
61 80 88 38 4f a7 40 00 4d+13:40:18.980 WRITE FPDMA QUEUED
60 08 80 08 e2 46 40 00 4d+13:40:18.980 READ FPDMA QUEUED
60 08 78 00 e2 46 40 00 4d+13:40:18.980 READ FPDMA QUEUED
60 08 70 00 e7 50 40 00 4d+13:40:18.980 READ FPDMA QUEUED
Error 160 occurred at disk power-on lifetime: 49601 hours (2066 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 e7 50 08 Error: WP at LBA = 0x0850e700 = 139519744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 70 b8 80 09 7d 40 00 4d+13:40:13.966 WRITE FPDMA QUEUED
61 80 b0 c8 48 75 40 00 4d+13:40:13.966 WRITE FPDMA QUEUED
61 70 a8 90 e4 80 40 00 4d+13:40:13.966 WRITE FPDMA QUEUED
61 d0 a0 30 9b 6d 40 00 4d+13:40:13.966 WRITE FPDMA QUEUED
61 40 98 a0 e5 28 40 00 4d+13:40:13.966 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 70% 49699 944826112
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
Code:
# sfdisk -luS /dev/sdb or # 'fdisk -ul /dev/sdb'
Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 1918C323-3472-48F1-874C-51B690C763F3
Device Start End Sectors Size Type
/dev/sdb1 2048 828377087 828375040 395G Linux LVM
/dev/sdb2 828377088 1656752127 828375040 395G Linux LVM
/dev/sdb3 1656752128 2485127167 828375040 395G Linux LVM
/dev/sdb4 2485127168 3313502207 828375040 395G Linux LVM
/dev/sdb5 3313502208 3907029134 593526927 283G Linux LVM
I followed to these instruction to find in which LVM2 logical partition is used the PE number 14214
(944826112 - 828377088) = 116449024/ 8192 = 14214.96875
https://www.linuxquestions.org/quest...rs-4175659756/
https://www.smartmontools.org/wiki/B...wto#LVMrepairs
at step :
Code:
lvdisplay --maps |egrep 'Physical|LV Name|Type'
Code:
LV Name swap
Type linear
Physical volume /dev/sda3
Physical extents 0 to 16383
LV Name root
Type linear
Physical volume /dev/sda3
Physical extents 16384 to 44927
i havent found sdb2
Could you please help me to resolve this problem
