SUSE 10 no proxy domains problem

TradedManatee · 05-09-2006, 05:57 PM

I have a set up with 3 PCs running window one of which is dual boot with SuSE version 10.0. All three are attached to a D-Link router, which is connected up to a cable modem.

All the machines are set up under DHCP with the router at 192.168.11.1. Under windows I have the ISPs proxy server set up with the proxy bypassed for 192.168.11.*, however when I try to set up the network connection under SuSE/YaST it will not accept the wildcard.

It lists localhost and the loopback address, but I can't get it to bypass the proxy for the http and ftp server on the other machines.

If I disable the proxy client entirely then I can access the other machines and enabling it works for the Internet.

I've searched the handbook and the Internet for examples of how to configure it, but to no avail.

Any suggestions would be much appreciated...

Peter

sniper_pro · 05-09-2006, 10:21 PM

Quote:

route del 0.0.0.0 DELDTE you default route

route add 你的校园网IP mask 子网掩码 8139的网关
route add 202.202.0.0 mask 255.255.240.0 192.168.123.254 (你校园网的地址用8139访问)
route add 0.0.0.0 mask 0.0.0.0 10.198.113.85

如果你的8139是设置的静态地址的话，那么就只要不设置网关（不用删除缺省路由0.0.0.0）就可以了，但下面这步还是要做的。
route add 202.202.0.0 mask 255.255.240.0 192.168.123.254

this is my problem
first: on the windows , route --help (linux ? i don't know)

other: proxy,chcek ping ! or (shell)#FTP X.X.X.X
see e.g. PASS PROXY go to proxy.

other: yast2 proxy i used very good. please check firewall.

other: d-link router .please close DHCP. try again.
if no DHCP problem,don't close DHCP.continue use DHCP.

i from china. EN very bad.sorry .i neither you understand problem . so advice.