LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking
User Name
Password
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.

Notices

Reply
 
Search this Thread
Old 05-19-2008, 10:34 AM   #1
shubhamagarwal1
LQ Newbie
 
Registered: May 2008
Posts: 3

Rep: Reputation: 0
problem: connecting to internet on ubuntu


hi

i have ubuntu(gutsy gibbon or ubuntu 7.10) kernel-2.6.22.14-generic installed on my pc.

i also have a windows xp (sp2)installation on my pc.

those two are installed on separate hd altogether to avoid any disturbance.

i ve got huawei quidway wa1003a modem provided by bsnl dataone/broadband which works fine on windows but not on linux.



pls help at the earliest



following is a log of my linux environment for ur study:



spirit@spirit-desktop:~$ lspci

00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)

00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)

00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)

00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)

03:01.0 Communication controller: Rockwell International HCF 56k Data/Fax Modem (rev 01)



spirit@spirit-desktop:~$ modprobe speedtch

FATAL: Error inserting speedtch (/lib/modules/2.6.22-14-generic/kernel/drivers/usb/atm/speedtch.ko): Operation not permitted



spirit@spirit-desktop:~$ lspci -vvnn

00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03)

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

Latency: 0

Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]

Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 03) (prog-if 00 [VGA])

Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 11

Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]

Region 1: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]

Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) (prog-if 00 [UHCI])

Subsystem: Intel Corporation Unknown device [8086:24c0]

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 11

Region 4: I/O ports at ec00 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20 [EHCI])

Subsystem: Intel Corporation Unknown device [8086:24c0]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin D routed to IRQ 10

Region 0: Memory at dff7bc00 (32-bit, non-prefetchable) [size=1K]

Capabilities: <access denied>

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+

Latency: 0

Bus: primary=00, secondary=03, subordinate=03, sec-latency=32

I/O behind bridge: 0000c000-0000cfff

Memory behind bridge: dfd00000-dfdfffff

Prefetchable memory behind bridge: cf900000-cf9fffff

Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)

Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP])

Subsystem: Intel Corporation Unknown device [8086:24c0]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin A routed to IRQ 11

Region 0: I/O ports at 01f0 [size=8]

Region 1: I/O ports at 03f4 [size=1]

Region 2: I/O ports at 0170 [size=8]

Region 3: I/O ports at 0374 [size=1]

Region 4: I/O ports at fc00 [size=16]

Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)

Subsystem: Intel Corporation Unknown device [8086:24c0]

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin B routed to IRQ 12

Region 4: I/O ports at 0c00 [size=32]

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02)

Subsystem: C-Media Electronics Inc Unknown device [13f6:0300]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

Interrupt: pin B routed to IRQ 12

Region 0: I/O ports at e800 [size=256]

Region 1: I/O ports at e400 [size=64]

Region 2: Memory at dff7ba00 (32-bit, non-prefetchable) [size=512]

Region 3: Memory at dff7b900 (32-bit, non-prefetchable) [size=256]

Capabilities: <access denied>

03:01.0 Communication controller [0780]: Rockwell International HCF 56k Data/Fax Modem [127a:1003] (rev 01)

Subsystem: CIS Technology Inc Compaq 229-DF Ducati [1436:1602]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32

Interrupt: pin A routed to IRQ 3

Region 0: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]

Region 1: I/O ports at cc00 [size=8]

Capabilities: <access denied>

--// Mod Edit. Removed text. See the warning //--

Last edited by peter_robb; 05-27-2008 at 12:06 PM.
 
Old 05-19-2008, 10:42 AM   #2
shubhamagarwal1
LQ Newbie
 
Registered: May 2008
Posts: 3

Original Poster
Rep: Reputation: 0
problem: connectring to internet on ubuntu (part2)

hi

i have ubuntu(gutsy gibbon or ubuntu 7.10) kernel-2.6.22.14-generic installed on my pc.

i also have a windows xp (sp2)installation on my pc.

those two are installed on separate hd altogether to avoid any disturbance.

i ve got huawei quidway wa1003a modem provided by bsnl dataone/broadband which works fine on windows but not on linux.



pls help at the earliest



following is a log of my linux environment for ur study:

spirit@spirit-desktop:~$ sudo dmidecode
# dmidecode 2.9
SMBIOS 2.3 present.
18 structures occupying 722 bytes.
Table at 0x000F0630.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 07.00T
Release Date: 04/02/01
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 256 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: ECS
Product Name: M903UXX
Version: 1.0
Serial Number: 00000000
UUID: Not Settable
Wake-up Type: Modem Ring

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: ECS
Product Name: M903UXX
Version: 1.0
Serial Number: 00000000

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: ECS
Type: Desktop
Lock: Not Present
Version: 1.0
Serial Number: 00000000
Asset Tag: 0123ABC
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000

Handle 0x0004, DMI type 4, 32 bytes
Processor Information
Socket Designation: FC-478
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 13 0F 18 51 55 00 00 00
Signature: Type 0, Family 32, Model 129, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
DE (Debugging extension)
TSC (Time stamp counter)
PAE (Physical address extension)
Version: Intel(R) Pentium(R) 4 Processor
Voltage: 3.3 V 2.9 V
External Clock: 100 MHz
Max Speed: 3000 MHz
Current Speed: 1700 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Pipeline Burst Synchronous
Speed: 40 ns
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 256 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: 40 ns
Error Correction Type: Parity
System Type: Unified
Associativity: Other

Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities: None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0008
0x0009
Enabled Error Correcting Capabilities: None

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 1 0
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 3 2
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK

Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported

Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported

Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported

Handle 0x000D, DMI type 11, 5 bytes
OEM Strings
String 1: SMBIOS Support from AMI
String 2: Tested by James

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: Mini Centronics
External Reference Designator: Def
External Connector Type: DB-25 male
Port Type: SSA SCSI

Handle 0x000F, DMI type 12, 5 bytes
System Configuration Options
Option 1: System Management BIOS from Atlanta
Option 2: SMBIOS from AMI

Handle 0x0010, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 4
English
Traditional Chinese
Simplified Chinese
Japanese
Currently Installed Language: English

Handle 0x0011, DMI type 127, 4 bytes
End Of Table


spirit@spirit-desktop:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>

00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 24c0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at ec00 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 24c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at dff7bc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: cf900000-cf9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 24c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 24c0
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 12
Region 4: I/O ports at 0c00 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
Subsystem: C-Media Electronics Inc Unknown device 0300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 12
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at e400 [size=64]
Region 2: Memory at dff7ba00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at dff7b900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

03:01.0 Communication controller: Rockwell International HCF 56k Data/Fax Modem (rev 01)
Subsystem: CIS Technology Inc Compaq 229-DF Ducati
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 3
Region 0: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at cc00 [size=8]
Capabilities: <access denied>


spirit@spirit-desktop:~$ /sbin/ifconfig -a
lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)


spirit@spirit-desktop:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use


spirit@spirit-desktop:~$ /var/log/syslog
May 19 19:28:52 spirit-desktop syslogd 1.4.1#21ubuntu3: restart.
May 19 19:28:52 spirit-desktop anacron[7618]: Job `cron.daily' terminated
May 19 19:30:51 spirit-desktop kernel: [ 596.809776] usb 1-2: USB disconnect, address 5
May 19 19:30:51 spirit-desktop NetworkManager: <debug> [1211205651.525316] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3eb_902_noserial_if0').
May 19 19:30:51 spirit-desktop NetworkManager: <debug> [1211205651.534242] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3eb_902_noserial_usbraw').
May 19 19:30:51 spirit-desktop NetworkManager: <debug> [1211205651.542474] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3eb_902_noserial').
May 19 19:30:51 spirit-desktop kernel: [ 596.925542] usb 1-2: new full speed USB device using uhci_hcd and address 6
May 19 19:30:51 spirit-desktop kernel: [ 597.080390] usb 1-2: configuration #1 chosen from 1 choice
May 19 19:30:51 spirit-desktop kernel: [ 597.083332] hub 1-2:1.0: USB hub found
May 19 19:30:51 spirit-desktop NetworkManager: <debug> [1211205651.800322] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3eb_902_noserial').
May 19 19:30:51 spirit-desktop kernel: [ 597.086249] hub 1-2:1.0: 4 ports detected
May 19 19:30:51 spirit-desktop NetworkManager: <debug> [1211205651.926553] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3eb_902_noserial_if0').
May 19 19:30:51 spirit-desktop NetworkManager: <debug> [1211205651.998833] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3eb_902_noserial_usbraw').
May 19 19:32:12 spirit-desktop kernel: [ 677.966648] usb 1-2.4: new full speed USB device using uhci_hcd and address 7
May 19 19:32:12 spirit-desktop kernel: [ 678.142484] usb 1-2.4: configuration #1 chosen from 1 choice
May 19 19:32:13 spirit-desktop NetworkManager: <debug> [1211205733.214406] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_1110_9022_00_0f_a3_88_f2_0d').
May 19 19:32:13 spirit-desktop kernel: [ 678.434371] [ueagle-atm] driver ueagle-svn $Id: ueagle-atm.c 350 2007-05-26 08:52:44Z swg $ loaded
May 19 19:32:13 spirit-desktop kernel: [ 678.437956] usb 1-2.4: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9022) Rev (0X0): Eagle II
May 19 19:32:13 spirit-desktop kernel: [ 678.525628] usb 1-2.4: reset full speed USB device using uhci_hcd and address 7
May 19 19:32:13 spirit-desktop kernel: [ 678.671631] usb 1-2.4: [ueagle-atm] pre-firmware device, uploading firmware
May 19 19:32:13 spirit-desktop kernel: [ 678.672087] usb 1-2.4: [ueagle-atm] loading firmware ueagle-atm/eagleII.fw
May 19 19:32:13 spirit-desktop kernel: [ 678.674881] usb 1-2.4: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9022) Rev (0X0): Eagle II
May 19 19:32:13 spirit-desktop kernel: [ 678.698328] usb 1-2.4: [UEAGLE-ATM] modem reset failed with error -71
May 19 19:32:13 spirit-desktop kernel: [ 678.772200] usb 1-2.4: reset full speed USB device using uhci_hcd and address 7
May 19 19:32:13 spirit-desktop kernel: [ 678.939263] usb 1-2.4: [ueagle-atm] pre-firmware device, uploading firmware
May 19 19:32:13 spirit-desktop kernel: [ 678.939499] usb 1-2.4: [ueagle-atm] loading firmware ueagle-atm/eagleII.fw
May 19 19:32:13 spirit-desktop kernel: [ 678.940369] usbcore: registered new interface driver ueagle-atm
May 19 19:32:13 spirit-desktop NetworkManager: <debug> [1211205733.821551] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_1110_9022_00_0f_a3_88_f2_0d_if1').
May 19 19:32:13 spirit-desktop kernel: [ 679.045213] usbcore: registered new interface driver cdc_ether
May 19 19:32:13 spirit-desktop NetworkManager: <debug> [1211205733.914216] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_1110_9022_00_0f_a3_88_f2_0d_if0').
May 19 19:32:13 spirit-desktop kernel: [ 679.048012] usbcore: registered new interface driver rndis_host
May 19 19:32:14 spirit-desktop NetworkManager: <debug> [1211205734.084200] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_1110_9022_00_0f_a3_88_f2_0d_usbraw').
May 19 19:32:14 spirit-desktop kernel: [ 679.582711] usb 1-2.4: [ueagle-atm] firmware uploaded
May 19 19:32:41 spirit-desktop anacron[7618]: Job `cron.weekly' started
May 19 19:32:41 spirit-desktop anacron[11959]: Updated timestamp for job `cron.weekly' to 2008-05-19
May 19 19:32:42 spirit-desktop syslogd 1.4.1#21ubuntu3: restart.
May 19 19:32:42 spirit-desktop anacron[7618]: Job `cron.weekly' terminated
May 19 19:32:42 spirit-desktop anacron[7618]: Normal exit (2 jobs run)
May 19 19:33:54 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 19:33:54 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 19:33:54 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 19:33:54 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 19:33:54 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 19:45:53 spirit-desktop NetworkManager: <debug> [1211206553.511422] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_label_Ubuntu_7_10_i386').
May 19 19:45:53 spirit-desktop kernel: [ 1497.593087] cdrom: sr0: mrw address space DMA selected
May 19 19:45:53 spirit-desktop kernel: [ 1497.697193] cdrom: sr0: mrw address space DMA selected
May 19 19:45:53 spirit-desktop kernel: [ 1497.741056] UDF-fs: No VRS found
May 19 19:45:53 spirit-desktop kernel: [ 1497.769729] ISO 9660 Extensions: Microsoft Joliet Level 3
May 19 19:45:54 spirit-desktop kernel: [ 1497.791788] ISO 9660 Extensions: RRIP_1991A
May 19 19:48:58 spirit-desktop kernel: [ 1681.840364] PPP generic driver version 2.4.2
May 19 19:48:58 spirit-desktop kernel: [ 1681.846543] NET: Registered protocol family 24
May 19 20:02:22 spirit-desktop -- MARK --
May 19 20:17:01 spirit-desktop /USR/SBIN/CRON[30226]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 19 20:17:32 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 20:17:32 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 20:17:32 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 20:17:32 spirit-desktop NetworkManager: <info> /etc/network/interface changed: rebuilding the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Recreating the device list.
May 19 20:17:32 spirit-desktop NetworkManager: <info> Device list recreated successfully.
May 19 20:17:34 spirit-desktop NetworkManager: <info> Going to sleep.
May 19 20:17:34 spirit-desktop NetworkManager: <info> Waking up from sleep.
May 19 20:17:43 spirit-desktop pppd[30519]: Plugin pppoatm.so loaded.
May 19 20:17:43 spirit-desktop pppd[30521]: pppd 2.4.4 started by spirit, uid 1000
May 19 20:17:43 spirit-desktop pppd[30521]: connect(0.32): No such device

--// Mod Edit. Removed text. See the warning //--

Last edited by peter_robb; 05-27-2008 at 12:06 PM.
 
Old 05-19-2008, 12:01 PM   #3
lsteacke
Member
 
Registered: Jul 2007
Distribution: Ubuntu
Posts: 99

Rep: Reputation: 16
Heres the thing, plain and simple. We aren't gonna go through thousands of lines of kernel output to fix a network connectivity problem. There are a few files which we require the output of to help you, and 6 threads of garbage is not that. And even after looking through your threads, you failed to post the output of dmesg, which may have been useful.

Please for future reference, post the output of these commands first, and we will go from there.

Code:
ifconfig -a
Code:
route -n
Code:
cat /etc/resolv.conf
Code:
ping 127.0.0.1
Code:
cat /etc/network/interfaces

Last edited by lsteacke; 05-19-2008 at 12:06 PM.
 
Old 05-27-2008, 12:05 PM   #4
peter_robb
Senior Member
 
Registered: Feb 2002
Location: Szczecin, Poland
Distribution: Gentoo, Debian
Posts: 2,458

Rep: Reputation: 47
Please post one thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. The other threads have been closed because they are unnecessary.

Posting 6 times is just not on..
You've now collected some warning points to help our decisions on your future behaviour.

There are also several other threads on huawei cards you need to read.

Last edited by peter_robb; 05-27-2008 at 12:13 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Having trouble connecting to internet using Ubuntu 7.10 with Dell wireless 1450 Galapagos Linux - Wireless Networking 9 12-10-2007 10:28 PM
Connecting to Internet with SmartAX MT841 ADSL USB Modem under Ubuntu 6.06 leibinitz Ubuntu 1 08-22-2006 04:13 PM
Connecting to Internet with SmartAX MT841 ADSL USB Modem under Ubuntu 6.06 leibinitz Linux - Networking 0 08-22-2006 02:45 PM
help: ubuntu as a server connecting local network to internet ctdarksilver Linux - Networking 2 10-26-2005 09:17 PM
Ubuntu Connecting to Dial up Internet gangulyhanduli Linux - Newbie 3 09-25-2005 06:11 AM


All times are GMT -5. The time now is 03:38 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration