Hi!
I installed OpenVPN network (Windows client to Linux server), made all required setup using almost standard configuration.
Linux part starts OK end creates the following interface:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:420 (420.0 B)
Windows part also runs OK and connects successfully to the server creating interface as follows:
Code:
Ethernet adapter Local Area Connection 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Win32 Adapter V9
Physical Address. . . . . . . . . : 00-FF-59-13-7B-AE
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.8.0.6
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 10.8.0.5
Lease Obtained. . . . . . . . . . : 5 грудня 2011 р. 23:25:04
Lease Expires . . . . . . . . . . : 4 грудня 2012 р. 23:25:04
As far as address 10.8.0.5 which is the server's endpoint for the client does not really exist on the server side I suspect that client-server communication is hardly possible or I do not know something specific about OpenVPN technique. Neither 10.8.0.5 nor 10.8.0.1 is pingable from the client side and 10.8.0.6 is not pingable from the server side. Can anybody comment all this and what I might miss configuring the server/client?
I will supply more configuration data if required.