i have tried things mentioned in the following 2 websites
1.
http://installing-huawei-cdma-modem-...tion_8942.html
2.
http://www.openpages.info/huawei.html
but in vain.
however i have notice a difference in their configuration and mine(
theirs' is ti_usb_3410_5052: probe of
1-1:1.0
bu mine says i_usb_3410_5052: probe of
2-2:1.0
what should i do as even after i did as they said, i still get the
ti_usb_3410_5052: probe of 2-2:1.0 failed with error -5 error message.
what should i do to get my huawei ti ets 2288 working under linux.
[ 40.129912] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 40.130029] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 40.130835] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 40.131861] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 40.131947] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 40.132077] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 40.134897] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 40.134904] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 40.152989] mice: PS/2 mouse device common for all mice
[ 40.153141] EISA: Probing bus 0 at eisa.0
[ 40.153181] EISA: Detected 0 cards.
[ 40.153184] cpuidle: using governor ladder
[ 40.153187] cpuidle: using governor menu
[ 40.153276] NET: Registered protocol family 1
[ 40.153306] Using IPI No-Shortcut mode
[ 40.153341] registered taskstats version 1
[ 40.153448] Magic number: 8:467:89
[ 40.153519] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 40.153521] EDD information not available.
[ 40.153818] Freeing unused kernel memory: 364k freed
[ 40.170952] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 41.384344] fuse init (API version 7.9)
[ 41.403813] ACPI: Fan [FAN] (on)
[ 41.411125] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 41.411140] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 41.412990] ACPI: Thermal Zone [THRM] (40 C)
[ 41.609870] usbcore: registered new interface driver usbfs
[ 41.609902] usbcore: registered new interface driver hub
[ 41.609957] usbcore: registered new device driver usb
[ 41.612691] USB Universal Host Controller Interface driver v3.0
[ 41.612751] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 41.612764] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 41.612769] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 41.613020] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 41.613048] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[ 41.613203] usb usb1: configuration #1 chosen from 1 choice
[ 41.613234] hub 1-0:1.0: USB hub found
[ 41.613241] hub 1-0:1.0: 2 ports detected
[ 41.718549] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 41.718564] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 41.718568] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 41.718597] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 41.718624] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e100
[ 41.718759] usb usb2: configuration #1 chosen from 1 choice
[ 41.718790] hub 2-0:1.0: USB hub found
[ 41.718797] hub 2-0:1.0: 2 ports detected
[ 41.765862] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 41.788500] SCSI subsystem initialized
[ 41.800323] libata version 3.00 loaded.
[ 41.822510] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 41.822528] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 41.822533] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 41.822565] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 41.822597] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 41.822747] usb usb3: configuration #1 chosen from 1 choice
[ 41.822784] hub 3-0:1.0: USB hub found
[ 41.822792] hub 3-0:1.0: 2 ports detected
[ 41.878098] FDC 0 is a post-1991 82077
[ 41.926358] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 41.926373] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 41.926378] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 41.926407] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 41.926431] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 41.926565] usb usb4: configuration #1 chosen from 1 choice
[ 41.926596] hub 4-0:1.0: USB hub found
[ 41.926603] hub 4-0:1.0: 2 ports detected
[ 42.030264] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 42.030271] 8139cp 0000:01:03.0: Try the "8139too" driver instead.
[ 42.031601] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 42.031621] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 42.031625] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 42.031655] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 42.035571] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 42.035582] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8580000
[ 42.040610] 8139too Fast Ethernet driver 0.9.28
[ 42.062119] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 42.074086] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 42.074224] usb usb5: configuration #1 chosen from 1 choice
[ 42.074254] hub 5-0:1.0: USB hub found
[ 42.074262] hub 5-0:1.0: 8 ports detected
[ 42.178192] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 42.178892] eth0: RealTek RTL8139 at 0xd000, 00:15:58:a1:22:da, IRQ 19
[ 42.178895] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 42.178968] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 42.179030] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 42.179048] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 42.179065] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 42.179091] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 42.179102] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 42.183256] ata_piix 0000:00:1f.1: version 2.12
[ 42.183273] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 42.183322] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 42.183403] scsi0 : ata_piix
[ 42.183457] scsi1 : ata_piix
[ 42.184160] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 42.184163] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 42.350171] ata1.00: ATA-7: ST3802110A, 3.AHL, max UDMA/100
[ 42.350176] ata1.00: 156301488 sectors, multi 16: LBA48
[ 42.366020] ata1.00: configured for UDMA/100
[ 42.689503] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 42.697788] ata2.00: ATAPI: LITE-ON COMBO SOHC-4836K, SPJ2, max UDMA/33
[ 42.885534] ata2.00: configured for UDMA/33
[ 42.885668] scsi 0:0:0:0: Direct-Access ATA ST3802110A 3.AH PQ: 0 ANSI: 5
[ 42.887518] scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-4836K SPJ2 PQ: 0 ANSI: 5
[ 42.887589] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 42.887610] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 42.887651] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 42.887941] scsi2 : ata_piix
[ 42.888101] scsi3 : ata_piix
[ 42.888679] ata3: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe900 irq 18
[ 42.888682] ata4: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xe908 irq 18
[ 42.910459] usb 2-2: configuration #1 chosen from 2 choices
[ 42.913361] usb 2-2: can't set config #1, error -32
[ 43.225473] Driver 'sd' needs updating - please use bus_type methods
[ 43.225583] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 43.225602] sd 0:0:0:0: [sda] Write Protect is off
[ 43.225605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 43.225630] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 43.225694] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 43.225708] sd 0:0:0:0: [sda] Write Protect is off
[ 43.225711] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 43.225735] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 43.225739] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 43.247657] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 43.340392] sd 0:0:0:0: [sda] Attached SCSI disk
[ 43.345868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 43.345904] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 43.347155] sr0: scsi3-mmc drive: 24x/48x writer cd/rw xa/form2 cdda tray
[ 43.347161] Uniform CD-ROM driver Revision: 3.20
[ 43.347220] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 45.183039] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 45.203311] ISO 9660 Extensions: RRIP_1991A
[ 45.452031] Registering unionfs 1.4
[ 45.452035] unionfs: debugging is not enabled
[ 45.460470] loop: module loaded
[ 45.737077] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 89.257576] Linux agpgart interface v0.102
[ 89.417582] agpgart: Detected an Intel 865 Chipset.
[ 89.418343] agpgart: Detected 8060K stolen memory.
[ 89.429751] agpgart: AGP aperture is 128M @ 0xf0000000
[ 89.532337] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.953290] iTCO_vendor_support: vendor-support=0
[ 90.053278] logips2pp: Detected unknown logitech mouse model 106
[ 90.218485] input: Power Button (FF) as /devices/virtual/input/input3
[ 90.248508] ACPI: Power Button (FF) [PWRF]
[ 90.248579] input: Power Button (CM) as /devices/virtual/input/input4
[ 90.264510] ACPI: Power Button (CM) [PWRB]
[ 90.279138] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 90.283973] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 90.542558] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 90.600460] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.658927] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 90.658967] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 90.659049] parport_pc 00:08: reported by Plug and Play ACPI
[ 90.659107] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 90.765394] intel_rng: FWH not detected
[ 91.330079] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
[ 91.330106] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 91.651176] intel8x0_measure_ac97_clock: measured 53735 usecs
[ 91.651180] intel8x0: clocking to 48000
[ 92.937536] Adding 281096k swap on /dev/sda10. Priority:-1 extents:1 across:281096k
[ 93.484849] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 94.655420] No dock devices found.
[ 98.106558] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 98.106564] apm: disabled - APM is not SMP safe.
[ 98.228211] lp0: using parport0 (interrupt-driven).
[ 98.275485] ppdev: user-space parallel port driver
[ 103.565679] eth0: link down
[ 103.738529] Bluetooth: Core ver 2.11
[ 103.739140] NET: Registered protocol family 31
[ 103.739144] Bluetooth: HCI device and connection manager initialized
[ 103.739148] Bluetooth: HCI socket layer initialized
[ 103.934120] Bluetooth: L2CAP ver 2.9
[ 103.934127] Bluetooth: L2CAP socket layer initialized
[ 104.004833] Bluetooth: RFCOMM socket layer initialized
[ 104.005543] Bluetooth: RFCOMM TTY layer initialized
[ 104.005547] Bluetooth: RFCOMM ver 1.8
[ 109.678182] [drm] Initialized drm 1.1.0 20060810
[ 109.702131] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 109.702144] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 109.702225] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 120.632408] NET: Registered protocol family 10
[ 120.632985] lo: Disabled Privacy Extensions
[ 120.633671] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 380.253247] eth0: link down
[ 380.255802] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 380.300853] eth0: link down
[ 380.303458] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 382.850918] eth0: link down
[ 382.853494] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 388.721122] eth0: link down
[ 388.723699] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 411.410021] eth0: link down
[ 411.412574] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 411.465690] eth0: link down
[ 411.468233] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 412.074041] PPP generic driver version 2.4.2
[ 414.131746] eth0: link down
[ 414.134303] ADDRCONF(NETDEV_UP): eth0: link is not ready
ubuntu@ubuntu:~$ sudo dmesg -c
[ 573.179574] usb 2-2: USB disconnect, address 3
[ 576.624284] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 576.818188] usb 2-2: configuration #1 chosen from 1 choice
[ 580.537425] usbcore: registered new interface driver usbserial
[ 580.538397] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 580.539644] usbcore: registered new interface driver usbserial_generic
[ 580.539649] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 580.546526] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for TI USB 3410 1 port adapter
[ 580.548055] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for TI USB 5052 2 port adapter
[ 580.549498]
[ 580.550294] usbcore: registered new interface driver ti_usb_3410_5052
[ 580.550300] /build/buildd/linux-2.6.24/drivers/usb/serial/ti_usb_3410_5052.c: TI USB 3410/5052 Serial Driver v0.9
ubuntu@ubuntu:~$ ti_usb_3410_5052: probe of 2-2:1.0 failed with error -5