hello all,
hoping to glean some insight.
I have a 3018 CNC router that I've been trying to hook up to my laptop running Linus Mint with bCNC installed.
After doing an lsusb and finding the port the router's connected to, inputting the port into bCNC, I get a message saying "permission denied". a little more research and then I tried udevadm and got the following:
PHP Code:
udevadm monitor --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
UDEV [4068.729870] add /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV [4068.758168] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV [4068.827245] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0 (usb-serial)
UDEV [4068.855524] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0/tty/ttyUSB0 (tty)
UDEV [4068.860153] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0 (usb-serial)
UDEV [4068.862828] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV [4068.875017] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV [4069.619503] add /devices/virtual/input/input26 (input)
UDEV [4069.725947] add /devices/virtual/input/input26/event20 (input)
UDEV [4069.747865] remove /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0/tty/ttyUSB0 (tty)
UDEV [4069.753105] unbind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0 (usb-serial)
UDEV [4069.756537] remove /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/ttyUSB0 (usb-serial)
UDEV [4069.759344] unbind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV [7629.904391] change /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
Correct me if I'm wrong, but "remove" and "unbind" is bad!
any suggestions?
