I was hoping his could be fixed by updating the kernel so I installed an updated kernel
on boot up I found this a the end of the boot up messages
Code:
Loading ALSA mixer settings: /usr/sbin/alsactl restore
No state is present for card MID
Found hardware: "HDA-Intel" "IDT 92HD75B3X5" "HDA:111d7603,103c172b,00100202 HDA:11c11040,103c3066,00100200" "0
x103c" "0x172b"
Hardware is initialized using a generic method
No state is present for card MID
No state is present for card NVidia
Found hardware: "HDA-Intel" "Nvidia GPU 0b HDMI/DP" "HDA:10de000b,10de0101,00100200" "0x103c" "0x172b"
Hardware is initialized using a generic method
No state is present for card NVidia
Starting gpm: /usr/sbin/gpm -m /dev/mouse -t ps2
this message only shows up in the boot screen it.s not in any of the logs or in the dmesg output
now it looks like I need to install the nvidia driver
I was at the nvidia web site BUT they want an aftermarket product name for this GPU I don't have one as this is a built in GPU
in the boot screen this is preceded by a line about NVidia BUT the Nvidia line is missing from the logs and dmesg
Code:
[ 9.255775] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 9.255776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.255782] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 9.255782] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.255786] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 9.255788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.255793] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 9.255793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lspci -v tells me this about the GPU
Code:
01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [NVS 3100M] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company GT218M [NVS 3100M]
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 5000 [size=128]
Expansion ROM at d3080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nvidiafb, nouveau