LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software > Linux - Kernel
User Name
Password
Linux - Kernel This forum is for all discussion relating to the Linux kernel.

Notices


Reply
  Search this Thread
Old 12-14-2014, 07:38 PM   #1
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Rep: Reputation: 21
kernel: [154858.820009] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed.


System is Ubuntu 14.04.1 LTS, kernel 3.13.0-43-generic. I've periodically been seeing system lockups since September. I did a bug report on this at Ubuntu LaunchPad and the response I've gotten so far is that I should update my bios or at least that's how I read it. Here is the report I submitted and the reply:

Code:
I have noticed the lockups periodically since 09/13/2014. I can't remember what kernel version was in use then 
possibly kernel 3.13.0-35-generic or -36. It has continued periodically through versions -39; -40 and now to -43. 
The last time this has happened was today Dec 13 14:40:57 localhost kernel: [154858.820009] [drm:i915_hangcheck_
elapsed] *ERROR* Hangcheck timer elapsed... render ring idle. At times when it locks up I will have a cursor on a 
black screen and will have to press the power button to restart other times it will lockup whenever I'm in an application 
such as Firefox or Evolution. At that time I can usually CTRL>ALT-F1 log in and run 'sudo reboot' to restart the system. 
The release information requested is:

chris@localhost:~$ lsb_release -rd
Description: Ubuntu 14.04.1 LTS
Release: 14.04

I've also attached the version.log and lspci-vnvn.log to this report.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-43-generic 3.13.0-43.72
ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
Uname: Linux 3.13.0-43-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: chris 2445 F.... pulseaudio
CurrentDesktop: GNOME
Date: Sat Dec 13 20:22:51 2014
HibernationDevice: RESUME=UUID=bb329dc0-0642-4b6a-876a-12c2f02fb7f6
InstallationDate: Installed on 2014-10-24 (50 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
IwConfig:
 eth0 no wireless extensions.

 lo no wireless extensions.
MachineType: Dell Inc. OptiPlex 780
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=<set>
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=4254a7e9-429b-4f53-a08c-ae7ff839b98f ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.13.0-43-generic N/A
 linux-backports-modules-3.13.0-43-generic N/A
 linux-firmware 1.127.10
RfKill:

SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 02/13/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A03
dmi.board.name: 0C27VV
dmi.board.vendor: Dell Inc.
dmi.board.version: A01
dmi.chassis.asset.tag: LE0006476
dmi.chassis.type: 6
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA03:bd02/13/2010:svnDellInc.:pnOptiPlex780:pvr:rvnDellInc.:rn0C27VV:rvrA01:cvnDellInc.:ct6:cvr:
dmi.product.name: OptiPlex 780
dmi.sys.vendor: Dell Inc.

lspci -vnvn log

00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
	Subsystem: Dell Device [1028:0420]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fe500000-fe5fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [88] Subsystem: Dell Device [1028:0420]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0300c  Data: 41e1
	Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns, L1 <4us
			ClockPM- Surprise- LLActRep- BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending+ InProgress-
	Capabilities: [140 v1] Root Complex Link
		Desc:	PortNumber=02 ComponentID=01 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000feda5000
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 49
	Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at ecb8 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0300c  Data: 4172
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
	Subsystem: Dell Device [1028:0276]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at ece0 [size=32]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0100c  Data: 41a2
	Capabilities: [e0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ff20 [size=32]
	Capabilities: [50] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff00 [size=32]
	Capabilities: [50] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 4: I/O ports at fc00 [size=32]
	Capabilities: [50] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02)
	Subsystem: Dell Device [1028:0420]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 50
	Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4182
	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag- RBE-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=80
			Status:	NegoPending- InProgress-
	Capabilities: [130 v1] Root Complex Link
		Desc:	PortNumber=0f ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000feda8000
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: fe400000-fe4fffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <256ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0300c  Data: 4122
	Capabilities: [90] Subsystem: Dell Device [1028:0420]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=01 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000feda8000
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: fe300000-fe3fffff
	Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <256ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0300c  Data: 4142
	Capabilities: [90] Subsystem: Dell Device [1028:0420]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=02 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000feda8000
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at ff80 [size=32]
	Capabilities: [50] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff60 [size=32]
	Capabilities: [50] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at ff40 [size=32]
	Capabilities: [50] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0420]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Dell Device [1028:0420]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02)
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
	Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller [8086:3a00] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: I/O ports at fe00 [size=8]
	Region 1: I/O ports at fe10 [size=4]
	Region 2: I/O ports at fe20 [size=8]
	Region 3: I/O ports at fe30 [size=4]
	Region 4: I/O ports at fec0 [size=16]
	Region 5: I/O ports at ecc0 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02)
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 10
	Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0980 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Dell Device [1028:0420]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: I/O ports at fe40 [size=8]
	Region 1: I/O ports at fe50 [size=4]
	Region 2: I/O ports at fe60 [size=8]
	Region 3: I/O ports at fe70 [size=4]
	Region 4: I/O ports at fed0 [size=16]
	Region 5: I/O ports at ecd0 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ata_piix
The reply to the bug I received this morning is:

Code:
chris pollock, thank you for reporting this and helping make Ubuntu better. As per http://www.dell.com/support/home/us/en/04/product-support/product/optiPlex-780/drivers an update to your BIOS is available (A15). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command:
sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date

For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette .

Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report.

Once the BIOS is updated, then please mark this report Status Confirmed.

Thank you for your understanding.
tags: 	added: bios-outdated-a15
Changed in linux (Ubuntu):
importance: 	Undecided → Low
status: 	Confirmed → Incomplete
Would a bios update 'cure' this bug or is there something else entirely involved with it?
 
Old 12-15-2014, 10:33 AM   #2
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,292

Rep: Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322
It may do.

I feel they are serving you poorly, or very busy - p[robably both.

A BIOS upgrade is issued when the BIOS is screwed up in some way, and there is usually only one or two. It's rarely an annual event.

Hangcheck is probably telling you that something has gone out to lunch. It may be bios. There are boot parameters to deal with bios problems One I would suggest playing with is pcie_aspm

pcie_aspm=off #disables PCIE Active State Power Management
pcie_aspm=force # Forces the use of pcie_aspm on devices, which sometimes causes lockups.

Without these the bios gets more of a look in, if I understand this correctly.
That's quick & cheap to try, at any rate.
 
1 members found this post helpful.
Old 12-19-2014, 08:13 AM   #3
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
Apologies for the late reply, have been on vacation and of course came back to a black screen with a mouse cursor. I have found out that even though I can't get out of this except by CTRL>ALT>F1, logging in and issuing a 'sudo reboot' the system still is functioning. For instance fetchmail and procmail still poll for mail and process it. Yesterday, 18 Dec, after this happened again I updated to a newer kernel to see what happens. The odd part now is that the 'hangcheck' error has not been seen since 27 Nov so I'm not sure what was causing that. The newer issue was the black screen with the mouse cursor.
 
Old 12-19-2014, 10:42 AM   #4
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,292

Rep: Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322
That sounds like a video driver thing. Is the video driver installed on your new kernel?
 
Old 12-26-2014, 11:15 AM   #5
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
Although there have been bugs reported with the same 'hangcheck' the error also mentioned the GPU. So far the 3.14 kernel has been working fine with no issues at all. Will just have to wait and see.
 
Old 03-22-2015, 08:37 AM   #6
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
I realize it's been about three months since I visited this thread. There have been no changes in the problem even though I've been going through many different kernel versions up to and including 4.0.0-040000rc4-generic #201503152135 SMP Mon Mar 16 01:36:37 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux that I am currently running which still produces the error shown in the subject of this thread. For instance, yesterday morning I went to begin my morning routine, as usual the computer is on all night just running fetchmail and procmail and the other normal processes along with X-Screensaver. When I turned on the monitor on I was presented with a black screen with only a movable mouse cursor. I did a CTRL>ALT>F1 left the room and came back a few minutes later. Logged in and then ran 'sudo reboot'. The system rebooted normally. During this lockup the 'Hangcheck...' error was not noted nor was it noted on the previous one on 20 March, however on 19 March it was evident all when running the 4.0.0 kernel version. More of my comments/notations can be found here at my Ubuntu bug report https://bugs.launchpad.net/ubuntu/+s...x/+bug/1402331 I'm really getting irritated by this whole damn mess. I've never run across a system that I can't keep up for more than two days in my life and most of the time it's not even that long. I feel that the OP who is 'troubleshooting' this bug is just running me in circles. As a side note this same bug has been reported at freedesktop.org https://bugs.freedesktop.org/show_bug.cgi?id=75394 and I've also added comments to it but I don't know if it's actively being worked on and I don't know how to follow up on it.
 
Old 03-22-2015, 12:11 PM   #7
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,292

Rep: Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322
If it's a kernel bug, then the kernel bugzilla is the place. If X drivers, freedesktop might be the place.

Either way, no harm to bug them on the Phoronix.com forums. Developers seem to hang out there.
 
1 members found this post helpful.
Old 03-22-2015, 04:18 PM   #8
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
Thanks, question is it's been reported at freedesktop.org by someone other than me but seems like it's fallen by the wayside, as far as the Ubuntu Launchpad report I'm the only one who has made mention of it and as I said I seem to be getting the 'try this, do this, well did this work and so forth' drill. Honestly he's got my head spinning with everything he wants me to try and now in one of his last comments he wants me to install and run a completely earlier version (13.10) of Ubuntu to see if the bug is there. I just can't take my 14.04 system out of service and install another one to see if it's going to screw up I have too much going on this one. Anyway, I'll check in at the Phoronix.com forums and see what I can come up with. What I'd really like is a good definition of just what really means. One more bit of information I'll add and I don't have any idea if it means anything or not but after yesterday mornings lockup I saw this in my syslog:

Code:
Mar 21 06:49:00 localhost kernel: [71704.408013] ------------[ cut here ]------------
Mar 21 06:49:00 localhost kernel: [71704.408038] WARNING: CPU: 1 PID: 1100 at /home/kernel/COD/linux/drivers/gpu/drm/drm_irq.c:1138 drm_wait_one_vblank+0x12f/0x180 [drm]()
Mar 21 06:49:00 localhost kernel: [71704.408040] vblank wait timed out on crtc 0
Mar 21 06:49:00 localhost kernel: [71704.408042] Modules linked in: usblp bnep rfcomm bluetooth ses gpio_ich dell_wmi sparse_keymap enclosure joydev snd_hda_codec_analog snd_hda_codec_generic i915 coretemp snd_hda_intel kvm snd_hda_controller snd_hda_codec snd_hwdep dcdbas snd_pcm snd_seq_midi snd_seq_midi_event video drm_kms_helper snd_rawmidi serio_raw snd_seq drm snd_seq_device snd_timer i2c_algo_bit lpc_ich snd soundcore 8250_fintek wmi shpchp mac_hid parport_pc ppdev lp parport binfmt_misc uas usb_storage hid_generic usbhid hid e1000e ptp psmouse pata_acpi pps_core
Mar 21 06:49:00 localhost kernel: [71704.408085] CPU: 1 PID: 1100 Comm: Xorg Not tainted 4.0.0-040000rc4-generic #201503152135
Mar 21 06:49:00 localhost kernel: [71704.408087] Hardware name: Dell Inc. OptiPlex 780                 /0C27VV, BIOS A15 08/06/2013
Mar 21 06:49:00 localhost kernel: [71704.408089]  0000000000000472 ffff8800d936f9f8 ffffffff817dfa7a 0000000000000007
Mar 21 06:49:00 localhost kernel: [71704.408092]  ffff8800d936fa48 ffff8800d936fa38 ffffffff810791a7 0000000000000286
Mar 21 06:49:00 localhost kernel: [71704.408095]  0000000000000000 ffff8800d6878000 0000000000000000 0000000000000000
Mar 21 06:49:00 localhost kernel: [71704.408099] Call Trace:
Mar 21 06:49:00 localhost kernel: [71704.408106]  [<ffffffff817dfa7a>] dump_stack+0x45/0x57
Mar 21 06:49:00 localhost kernel: [71704.408111]  [<ffffffff810791a7>] warn_slowpath_common+0x97/0xe0
Mar 21 06:49:00 localhost kernel: [71704.408114]  [<ffffffff810792a6>] warn_slowpath_fmt+0x46/0x50
Mar 21 06:49:00 localhost kernel: [71704.408119]  [<ffffffff810bb0c7>] ? finish_wait+0x67/0x80
Mar 21 06:49:00 localhost kernel: [71704.408131]  [<ffffffffc0520cef>] drm_wait_one_vblank+0x12f/0x180 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408134]  [<ffffffff810baf90>] ? prepare_to_wait_event+0x100/0x100
Mar 21 06:49:00 localhost kernel: [71704.408147]  [<ffffffffc0520d60>] drm_crtc_wait_one_vblank+0x20/0x30 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408156]  [<ffffffffc05ab758>] drm_plane_helper_commit+0x228/0x2a0 [drm_kms_helper]
Mar 21 06:49:00 localhost kernel: [71704.408164]  [<ffffffffc05ab927>] drm_plane_helper_update+0xa7/0x100 [drm_kms_helper]
Mar 21 06:49:00 localhost kernel: [71704.408185]  [<ffffffffc052a433>] __setplane_internal+0x1a3/0x2d0 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408195]  [<ffffffffc052a692>] drm_mode_cursor_universal+0x132/0x230 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408206]  [<ffffffffc052a80f>] drm_mode_cursor_common+0x7f/0x1b0 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408216]  [<ffffffffc052e5f1>] drm_mode_cursor_ioctl+0x41/0x50 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408224]  [<ffffffffc051eee6>] drm_ioctl+0x2e6/0x590 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408235]  [<ffffffffc052e5b0>] ? drm_mode_setcrtc+0x500/0x500 [drm]
Mar 21 06:49:00 localhost kernel: [71704.408238]  [<ffffffff810857ff>] ? recalc_sigpending+0x1f/0x60
Mar 21 06:49:00 localhost kernel: [71704.408242]  [<ffffffff8120e105>] do_vfs_ioctl+0x75/0x320
Mar 21 06:49:00 localhost kernel: [71704.408244]  [<ffffffff81089c38>] ? restore_altstack+0x18/0x30
Mar 21 06:49:00 localhost kernel: [71704.408247]  [<ffffffff81218445>] ? __fget_light+0x25/0x70
Mar 21 06:49:00 localhost kernel: [71704.408249]  [<ffffffff8120e441>] SyS_ioctl+0x91/0xb0
Mar 21 06:49:00 localhost kernel: [71704.408252]  [<ffffffff817ec28d>] system_call_fastpath+0x16/0x1b
Mar 21 06:49:00 localhost kernel: [71704.408254] ---[ end trace 41cbdb3a15fbacd5 ]---
Mar 21 06:49:12 localhost kernel: [71716.720013] ------------[ cut here ]------------
Mar 21 06:49:12 localhost kernel: [71716.720037] WARNING: CPU: 1 PID: 1100 at /home/kernel/COD/linux/drivers/gpu/drm/drm_irq.c:1138 drm_wait_one_vblank+0x12f/0x180 [drm]()
Mar 21 06:49:12 localhost kernel: [71716.720039] vblank wait timed out on crtc 0
Mar 21 06:49:12 localhost kernel: [71716.720041] Modules linked in: usblp bnep rfcomm bluetooth ses gpio_ich dell_wmi sparse_keymap enclosure joydev snd_hda_codec_analog snd_hda_codec_generic i915 coretemp snd_hda_intel kvm snd_hda_controller snd_hda_codec snd_hwdep dcdbas snd_pcm snd_seq_midi snd_seq_midi_event video drm_kms_helper snd_rawmidi serio_raw snd_seq drm snd_seq_device snd_timer i2c_algo_bit lpc_ich snd soundcore 8250_fintek wmi shpchp mac_hid parport_pc ppdev lp parport binfmt_misc uas usb_storage hid_generic usbhid hid e1000e ptp psmouse pata_acpi pps_core
Mar 21 06:49:12 localhost kernel: [71716.720084] CPU: 1 PID: 1100 Comm: Xorg Tainted: G        W       4.0.0-040000rc4-generic #201503152135
Mar 21 06:49:12 localhost kernel: [71716.720087] Hardware name: Dell Inc. OptiPlex 780                 /0C27VV, BIOS A15 08/06/2013
Mar 21 06:49:12 localhost kernel: [71716.720088]  0000000000000472 ffff8800d936fa28 ffffffff817dfa7a 0000000000000007
Mar 21 06:49:12 localhost kernel: [71716.720092]  ffff8800d936fa78 ffff8800d936fa68 ffffffff810791a7 0000000000000286
Mar 21 06:49:12 localhost kernel: [71716.720095]  0000000000000000 ffff8800d6878000 0000000000000000 0000000000000000
Mar 21 06:49:12 localhost kernel: [71716.720098] Call Trace:
Mar 21 06:49:12 localhost kernel: [71716.720105]  [<ffffffff817dfa7a>] dump_stack+0x45/0x57
Mar 21 06:49:12 localhost kernel: [71716.720111]  [<ffffffff810791a7>] warn_slowpath_common+0x97/0xe0
Mar 21 06:49:12 localhost kernel: [71716.720114]  [<ffffffff810792a6>] warn_slowpath_fmt+0x46/0x50
Mar 21 06:49:12 localhost kernel: [71716.720118]  [<ffffffff810bb0c7>] ? finish_wait+0x67/0x80
Mar 21 06:49:12 localhost kernel: [71716.720131]  [<ffffffffc0520cef>] drm_wait_one_vblank+0x12f/0x180 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720134]  [<ffffffff810baf90>] ? prepare_to_wait_event+0x100/0x100
Mar 21 06:49:12 localhost kernel: [71716.720147]  [<ffffffffc0520d60>] drm_crtc_wait_one_vblank+0x20/0x30 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720156]  [<ffffffffc05ab770>] drm_plane_helper_commit+0x240/0x2a0 [drm_kms_helper]
Mar 21 06:49:12 localhost kernel: [71716.720164]  [<ffffffffc05ab82e>] drm_plane_helper_disable+0x5e/0xb0 [drm_kms_helper]
Mar 21 06:49:12 localhost kernel: [71716.720180]  [<ffffffffc052a470>] __setplane_internal+0x1e0/0x2d0 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720188]  [<ffffffff817e9afb>] ? __ww_mutex_lock_slowpath+0x15e/0x173
Mar 21 06:49:12 localhost kernel: [71716.720198]  [<ffffffffc052a692>] drm_mode_cursor_universal+0x132/0x230 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720208]  [<ffffffffc052a80f>] drm_mode_cursor_common+0x7f/0x1b0 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720219]  [<ffffffffc052e5f1>] drm_mode_cursor_ioctl+0x41/0x50 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720227]  [<ffffffffc051eee6>] drm_ioctl+0x2e6/0x590 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720237]  [<ffffffffc052e5b0>] ? drm_mode_setcrtc+0x500/0x500 [drm]
Mar 21 06:49:12 localhost kernel: [71716.720241]  [<ffffffff8101fa29>] ? read_tsc+0x9/0x10
Mar 21 06:49:12 localhost kernel: [71716.720244]  [<ffffffff810eacce>] ? ktime_get_ts64+0x4e/0xf0
Mar 21 06:49:12 localhost kernel: [71716.720247]  [<ffffffff8120e105>] do_vfs_ioctl+0x75/0x320
Mar 21 06:49:12 localhost kernel: [71716.720250]  [<ffffffff81218445>] ? __fget_light+0x25/0x70
Mar 21 06:49:12 localhost kernel: [71716.720252]  [<ffffffff8120e441>] SyS_ioctl+0x91/0xb0
Mar 21 06:49:12 localhost kernel: [71716.720255]  [<ffffffff817ec28d>] system_call_fastpath+0x16/0x1b
Mar 21 06:49:12 localhost kernel: [71716.720257] ---[ end trace 41cbdb3a15fbacd6 ]---
Mar 21 06:50:04 localhost spamd[1803]: spamd: connection from ip6-localhost [::1]:44269 to port 783, fd 6
Mar 21 06:50:04 localhost spamd[1803]: spamd: setuid to chris succeeded
Mar 21 06:50:04 localhost spamd[1803]: spamd: processing message <0.0.6D.31E.1D063CD004A72AE.47E1@vmta-i-79.lstrk.net> for chris:1000
Mar 21 06:43:36 localhost clamd[2856]: SelfCheck: Database status OK.
Mar 21 06:50:04 localhost clamd[2856]: Accepted connection from 127.0.0.1 on port 2030, fd 13
Mar 21 06:50:13 localhost kernel: [71777.620017] ------------[ cut here ]------------
Mar 21 06:50:13 localhost kernel: [71777.620057] WARNING: CPU: 0 PID: 1100 at /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:3601 intel_crtc_wait_for_pending_flips+0x172/0x200 [i915]()
Mar 21 06:50:13 localhost kernel: [71777.620058] WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue, !intel_crtc_has_pending_flip(crtc), 60*HZ) == 0)
Mar 21 06:50:13 localhost kernel: [71777.620087] Modules linked in: usblp bnep rfcomm bluetooth ses gpio_ich dell_wmi sparse_keymap enclosure joydev snd_hda_codec_analog snd_hda_codec_generic i915 coretemp snd_hda_intel kvm snd_hda_controller snd_hda_codec snd_hwdep dcdbas snd_pcm snd_seq_midi snd_seq_midi_event video drm_kms_helper snd_rawmidi serio_raw snd_seq drm snd_seq_device snd_timer i2c_algo_bit lpc_ich snd soundcore 8250_fintek wmi shpchp mac_hid parport_pc ppdev lp parport binfmt_misc uas usb_storage hid_generic usbhid hid e1000e ptp psmouse pata_acpi pps_core
Mar 21 06:50:13 localhost kernel: [71777.620090] CPU: 0 PID: 1100 Comm: Xorg Tainted: G        W       4.0.0-040000rc4-generic #201503152135
Mar 21 06:50:13 localhost kernel: [71777.620091] Hardware name: Dell Inc. OptiPlex 780                 /0C27VV, BIOS A15 08/06/2013
Mar 21 06:50:13 localhost kernel: [71777.620093]  0000000000000e11 ffff8800d936f708 ffffffff817dfa7a 000000000000d4ee
Mar 21 06:50:13 localhost kernel: [71777.620095]  ffff8800d936f758 ffff8800d936f748 ffffffff810791a7 0000000000000286
Mar 21 06:50:13 localhost kernel: [71777.620097]  ffff88003665c000 ffff8800d6878000 ffff8800d68781a8 ffff8800d77186b8
Mar 21 06:50:13 localhost kernel: [71777.620098] Call Trace:
Mar 21 06:50:13 localhost kernel: [71777.620104]  [<ffffffff817dfa7a>] dump_stack+0x45/0x57
Mar 21 06:50:13 localhost kernel: [71777.620108]  [<ffffffff810791a7>] warn_slowpath_common+0x97/0xe0
Mar 21 06:50:13 localhost kernel: [71777.620110]  [<ffffffff810792a6>] warn_slowpath_fmt+0x46/0x50
Mar 21 06:50:13 localhost kernel: [71777.620113]  [<ffffffff810bb0c7>] ? finish_wait+0x67/0x80
Mar 21 06:50:13 localhost kernel: [71777.620137]  [<ffffffffc072bdc2>] intel_crtc_wait_for_pending_flips+0x172/0x200 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620139]  [<ffffffff810baf90>] ? prepare_to_wait_event+0x100/0x100
Mar 21 06:50:13 localhost kernel: [71777.620163]  [<ffffffffc072c000>] intel_begin_crtc_commit+0x1b0/0x1c0 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620172]  [<ffffffffc05ab63f>] drm_plane_helper_commit+0x10f/0x2a0 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620178]  [<ffffffffc05ab927>] drm_plane_helper_update+0xa7/0x100 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620201]  [<ffffffffc07313c1>] intel_crtc_set_config+0x231/0x4f0 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620218]  [<ffffffffc052a1e6>] drm_mode_set_config_internal+0x66/0x110 [drm]
Mar 21 06:50:13 localhost kernel: [71777.620223]  [<ffffffffc05b4648>] restore_fbdev_mode+0xc8/0xf0 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620228]  [<ffffffffc05b6160>] drm_fb_helper_restore_fbdev_mode_unlocked+0x30/0x80 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620233]  [<ffffffffc05b61d4>] drm_fb_helper_set_par+0x24/0x50 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620249]  [<ffffffffc073e24a>] intel_fbdev_set_par+0x1a/0x60 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620252]  [<ffffffff814363c3>] fb_set_var+0x283/0x3a0
Mar 21 06:50:13 localhost kernel: [71777.620255]  [<ffffffff810b1fa0>] ? check_preempt_wakeup+0x110/0x210
Mar 21 06:50:13 localhost kernel: [71777.620256]  [<ffffffff8142d4e4>] fbcon_blank+0x1e4/0x2d0
Mar 21 06:50:13 localhost kernel: [71777.620259]  [<ffffffff814bfc30>] do_unblank_screen.part.22+0xa0/0x180
Mar 21 06:50:13 localhost kernel: [71777.620261]  [<ffffffff814bfd5c>] do_unblank_screen+0x4c/0x80
Mar 21 06:50:13 localhost kernel: [71777.620263]  [<ffffffff814b5225>] complete_change_console+0x65/0xf0
Mar 21 06:50:13 localhost kernel: [71777.620265]  [<ffffffff814b63bd>] vt_ioctl+0x110d/0x1190
Mar 21 06:50:13 localhost kernel: [71777.620272]  [<ffffffffc051ec9e>] ? drm_ioctl+0x9e/0x590 [drm]
Mar 21 06:50:13 localhost kernel: [71777.620275]  [<ffffffff814a8bf8>] tty_ioctl+0x418/0x980
Mar 21 06:50:13 localhost kernel: [71777.620277]  [<ffffffff811b3f80>] ? handle_mm_fault+0xb0/0x160
Mar 21 06:50:13 localhost kernel: [71777.620280]  [<ffffffff8120e105>] do_vfs_ioctl+0x75/0x320
Mar 21 06:50:13 localhost kernel: [71777.620282]  [<ffffffff81218445>] ? __fget_light+0x25/0x70
Mar 21 06:50:13 localhost kernel: [71777.620283]  [<ffffffff8120e441>] SyS_ioctl+0x91/0xb0
Mar 21 06:50:13 localhost kernel: [71777.620286]  [<ffffffff817ec28d>] system_call_fastpath+0x16/0x1b
Mar 21 06:50:13 localhost kernel: [71777.620287] ---[ end trace 41cbdb3a15fbacd7 ]---
Mar 21 06:50:13 localhost kernel: [71777.620287] ------------[ cut here ]------------
Mar 21 06:50:13 localhost kernel: [71777.620303] WARNING: CPU: 0 PID: 1100 at /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:3606 intel_crtc_wait_for_pending_flips+0x1f3/0x200 [i915]()
Mar 21 06:50:13 localhost kernel: [71777.620304] Removing stuck page flip
Mar 21 06:50:13 localhost kernel: [71777.620318] Modules linked in: usblp bnep rfcomm bluetooth ses gpio_ich dell_wmi sparse_keymap enclosure joydev snd_hda_codec_analog snd_hda_codec_generic i915 coretemp snd_hda_intel kvm snd_hda_controller snd_hda_codec snd_hwdep dcdbas snd_pcm snd_seq_midi snd_seq_midi_event video drm_kms_helper snd_rawmidi serio_raw snd_seq drm snd_seq_device snd_timer i2c_algo_bit lpc_ich snd soundcore 8250_fintek wmi shpchp mac_hid parport_pc ppdev lp parport binfmt_misc uas usb_storage hid_generic usbhid hid e1000e ptp psmouse pata_acpi pps_core
Mar 21 06:50:13 localhost kernel: [71777.620319] CPU: 0 PID: 1100 Comm: Xorg Tainted: G        W       4.0.0-040000rc4-generic #201503152135
Mar 21 06:50:13 localhost kernel: [71777.620320] Hardware name: Dell Inc. OptiPlex 780                 /0C27VV, BIOS A15 08/06/2013
Mar 21 06:50:13 localhost kernel: [71777.620321]  0000000000000e16 ffff8800d936f708 ffffffff817dfa7a 000000000000d5fe
Mar 21 06:50:13 localhost kernel: [71777.620322]  ffff8800d936f758 ffff8800d936f748 ffffffff810791a7 0000000000000286
Mar 21 06:50:13 localhost kernel: [71777.620323]  ffff88003665c000 ffff8800d6878000 ffff8800d68781a8 ffff8800d77186b8
Mar 21 06:50:13 localhost kernel: [71777.620324] Call Trace:
Mar 21 06:50:13 localhost kernel: [71777.620325]  [<ffffffff817dfa7a>] dump_stack+0x45/0x57
Mar 21 06:50:13 localhost kernel: [71777.620327]  [<ffffffff810791a7>] warn_slowpath_common+0x97/0xe0
Mar 21 06:50:13 localhost kernel: [71777.620328]  [<ffffffff810792a6>] warn_slowpath_fmt+0x46/0x50
Mar 21 06:50:13 localhost kernel: [71777.620330]  [<ffffffff810bb0c7>] ? finish_wait+0x67/0x80
Mar 21 06:50:13 localhost kernel: [71777.620345]  [<ffffffffc072be43>] intel_crtc_wait_for_pending_flips+0x1f3/0x200 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620347]  [<ffffffff810baf90>] ? prepare_to_wait_event+0x100/0x100
Mar 21 06:50:13 localhost kernel: [71777.620362]  [<ffffffffc072c000>] intel_begin_crtc_commit+0x1b0/0x1c0 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620367]  [<ffffffffc05ab63f>] drm_plane_helper_commit+0x10f/0x2a0 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620371]  [<ffffffffc05ab927>] drm_plane_helper_update+0xa7/0x100 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620386]  [<ffffffffc07313c1>] intel_crtc_set_config+0x231/0x4f0 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620396]  [<ffffffffc052a1e6>] drm_mode_set_config_internal+0x66/0x110 [drm]
Mar 21 06:50:13 localhost kernel: [71777.620401]  [<ffffffffc05b4648>] restore_fbdev_mode+0xc8/0xf0 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620405]  [<ffffffffc05b6160>] drm_fb_helper_restore_fbdev_mode_unlocked+0x30/0x80 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620410]  [<ffffffffc05b61d4>] drm_fb_helper_set_par+0x24/0x50 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.620425]  [<ffffffffc073e24a>] intel_fbdev_set_par+0x1a/0x60 [i915]
Mar 21 06:50:13 localhost kernel: [71777.620427]  [<ffffffff814363c3>] fb_set_var+0x283/0x3a0
Mar 21 06:50:13 localhost kernel: [71777.620429]  [<ffffffff810b1fa0>] ? check_preempt_wakeup+0x110/0x210
Mar 21 06:50:13 localhost kernel: [71777.620430]  [<ffffffff8142d4e4>] fbcon_blank+0x1e4/0x2d0
Mar 21 06:50:13 localhost kernel: [71777.620432]  [<ffffffff814bfc30>] do_unblank_screen.part.22+0xa0/0x180
Mar 21 06:50:13 localhost kernel: [71777.620433]  [<ffffffff814bfd5c>] do_unblank_screen+0x4c/0x80
Mar 21 06:50:13 localhost kernel: [71777.620435]  [<ffffffff814b5225>] complete_change_console+0x65/0xf0
Mar 21 06:50:13 localhost kernel: [71777.620436]  [<ffffffff814b63bd>] vt_ioctl+0x110d/0x1190
Mar 21 06:50:13 localhost kernel: [71777.620443]  [<ffffffffc051ec9e>] ? drm_ioctl+0x9e/0x590 [drm]
Mar 21 06:50:13 localhost kernel: [71777.620445]  [<ffffffff814a8bf8>] tty_ioctl+0x418/0x980
Mar 21 06:50:13 localhost kernel: [71777.620447]  [<ffffffff811b3f80>] ? handle_mm_fault+0xb0/0x160
Mar 21 06:50:13 localhost kernel: [71777.620448]  [<ffffffff8120e105>] do_vfs_ioctl+0x75/0x320
Mar 21 06:50:13 localhost kernel: [71777.620450]  [<ffffffff81218445>] ? __fget_light+0x25/0x70
Mar 21 06:50:13 localhost kernel: [71777.620451]  [<ffffffff8120e441>] SyS_ioctl+0x91/0xb0
Mar 21 06:50:13 localhost kernel: [71777.620453]  [<ffffffff817ec28d>] system_call_fastpath+0x16/0x1b
Mar 21 06:50:13 localhost kernel: [71777.620453] ---[ end trace 41cbdb3a15fbacd8 ]---
Mar 21 06:50:13 localhost kernel: [71777.720012] ------------[ cut here ]------------
Mar 21 06:50:13 localhost kernel: [71777.720024] WARNING: CPU: 0 PID: 1100 at /home/kernel/COD/linux/drivers/gpu/drm/drm_irq.c:1138 drm_wait_one_vblank+0x12f/0x180 [drm]()
Mar 21 06:50:13 localhost kernel: [71777.720025] vblank wait timed out on crtc 0
Mar 21 06:50:13 localhost kernel: [71777.720046] Modules linked in: usblp bnep rfcomm bluetooth ses gpio_ich dell_wmi sparse_keymap enclosure joydev snd_hda_codec_analog snd_hda_codec_generic i915 coretemp snd_hda_intel kvm snd_hda_controller snd_hda_codec snd_hwdep dcdbas snd_pcm snd_seq_midi snd_seq_midi_event video drm_kms_helper snd_rawmidi serio_raw snd_seq drm snd_seq_device snd_timer i2c_algo_bit lpc_ich snd soundcore 8250_fintek wmi shpchp mac_hid parport_pc ppdev lp parport binfmt_misc uas usb_storage hid_generic usbhid hid e1000e ptp psmouse pata_acpi pps_core
Mar 21 06:50:13 localhost kernel: [71777.720048] CPU: 0 PID: 1100 Comm: Xorg Tainted: G        W       4.0.0-040000rc4-generic #201503152135
Mar 21 06:50:13 localhost kernel: [71777.720049] Hardware name: Dell Inc. OptiPlex 780                 /0C27VV, BIOS A15 08/06/2013
Mar 21 06:50:13 localhost kernel: [71777.720051]  0000000000000472 ffff8800d936f738 ffffffff817dfa7a 000000000000d70e
Mar 21 06:50:13 localhost kernel: [71777.720053]  ffff8800d936f788 ffff8800d936f778 ffffffff810791a7 0000000000000286
Mar 21 06:50:13 localhost kernel: [71777.720054]  0000000000000000 ffff8800d6878000 0000000000000000 0000000000000000
Mar 21 06:50:13 localhost kernel: [71777.720055] Call Trace:
Mar 21 06:50:13 localhost kernel: [71777.720057]  [<ffffffff817dfa7a>] dump_stack+0x45/0x57
Mar 21 06:50:13 localhost kernel: [71777.720060]  [<ffffffff810791a7>] warn_slowpath_common+0x97/0xe0
Mar 21 06:50:13 localhost kernel: [71777.720062]  [<ffffffff810792a6>] warn_slowpath_fmt+0x46/0x50
Mar 21 06:50:13 localhost kernel: [71777.720064]  [<ffffffff810bb0c7>] ? finish_wait+0x67/0x80
Mar 21 06:50:13 localhost kernel: [71777.720075]  [<ffffffffc0520cef>] drm_wait_one_vblank+0x12f/0x180 [drm]
Mar 21 06:50:13 localhost kernel: [71777.720077]  [<ffffffff810baf90>] ? prepare_to_wait_event+0x100/0x100
Mar 21 06:50:13 localhost kernel: [71777.720089]  [<ffffffffc0520d60>] drm_crtc_wait_one_vblank+0x20/0x30 [drm]
Mar 21 06:50:13 localhost kernel: [71777.720095]  [<ffffffffc05ab770>] drm_plane_helper_commit+0x240/0x2a0 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.720101]  [<ffffffffc05ab927>] drm_plane_helper_update+0xa7/0x100 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.720125]  [<ffffffffc07313c1>] intel_crtc_set_config+0x231/0x4f0 [i915]
Mar 21 06:50:13 localhost kernel: [71777.720139]  [<ffffffffc052a1e6>] drm_mode_set_config_internal+0x66/0x110 [drm]
Mar 21 06:50:13 localhost kernel: [71777.720146]  [<ffffffffc05b4648>] restore_fbdev_mode+0xc8/0xf0 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.720153]  [<ffffffffc05b6160>] drm_fb_helper_restore_fbdev_mode_unlocked+0x30/0x80 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.720160]  [<ffffffffc05b61d4>] drm_fb_helper_set_par+0x24/0x50 [drm_kms_helper]
Mar 21 06:50:13 localhost kernel: [71777.720187]  [<ffffffffc073e24a>] intel_fbdev_set_par+0x1a/0x60 [i915]
Mar 21 06:50:13 localhost kernel: [71777.720189]  [<ffffffff814363c3>] fb_set_var+0x283/0x3a0
Mar 21 06:50:13 localhost kernel: [71777.720191]  [<ffffffff810b1fa0>] ? check_preempt_wakeup+0x110/0x210
Mar 21 06:50:13 localhost kernel: [71777.720192]  [<ffffffff8142d4e4>] fbcon_blank+0x1e4/0x2d0
Mar 21 06:50:13 localhost kernel: [71777.720194]  [<ffffffff814bfc30>] do_unblank_screen.part.22+0xa0/0x180
Mar 21 06:50:13 localhost kernel: [71777.720195]  [<ffffffff814bfd5c>] do_unblank_screen+0x4c/0x80
Mar 21 06:50:13 localhost kernel: [71777.720197]  [<ffffffff814b5225>] complete_change_console+0x65/0xf0
Mar 21 06:50:13 localhost kernel: [71777.720198]  [<ffffffff814b63bd>] vt_ioctl+0x110d/0x1190
Mar 21 06:50:13 localhost kernel: [71777.720205]  [<ffffffffc051ec9e>] ? drm_ioctl+0x9e/0x590 [drm]
Mar 21 06:50:13 localhost kernel: [71777.720207]  [<ffffffff814a8bf8>] tty_ioctl+0x418/0x980
Mar 21 06:50:13 localhost kernel: [71777.720209]  [<ffffffff811b3f80>] ? handle_mm_fault+0xb0/0x160
Mar 21 06:50:13 localhost kernel: [71777.720210]  [<ffffffff8120e105>] do_vfs_ioctl+0x75/0x320
Mar 21 06:50:13 localhost kernel: [71777.720212]  [<ffffffff81218445>] ? __fget_light+0x25/0x70
Mar 21 06:50:13 localhost kernel: [71777.720213]  [<ffffffff8120e441>] SyS_ioctl+0x91/0xb0
Mar 21 06:50:13 localhost kernel: [71777.720214]  [<ffffffff817ec28d>] system_call_fastpath+0x16/0x1b
Mar 21 06:50:13 localhost kernel: [71777.720215] ---[ end trace 41cbdb3a15fbacd9 ]---
Chris
 
Old 03-23-2015, 05:26 AM   #9
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,292

Rep: Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322
Quote:
vblank wait timed out on crtc 0
I never pay too much attention to what a cpu does after it pukes. It rarely leads to to why it puked in the first place.

/begin boring tech trivia
The above line is a graphics thing, and appears pretty early in your log snippet. In monitors of old, vblank was a black level applied as the dot was in 'flyback'. It writes the line; vblank is applied; it flies back to the start; vblank is removed and signal applied; it writes the next line;

Without vblank, you see white lines where the dot traces back.
/end boring tech trivia

That looks like the graphics driver stopped making sense in mid line
 
1 members found this post helpful.
Old 03-23-2015, 08:21 AM   #10
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
Thanks for the reply. I went to Phoronix.com and wrote a post in the DRM forum last night I guess I have to wait now for a moderator to approve it before it can get posted. I just really wish I had a definition of what this means - drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed. I see that there is a 4.0.0-040000rc5-generic kernel our today so I guess the next time I have a lockup the guy on the Ubuntu Launchpad Bugzilla will want me to try that one to see if it happens.
 
Old 03-23-2015, 09:56 AM   #11
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,292

Rep: Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322
Did a quick check.

HQANGCHECK timer = watchdog timer basically. It's in the kernel (Debug stuff?) and mine runs just fine without it. It sits there quiet as long it's been talked to. But when the software sticks in a loop or crashes, the conversation stops. So the software has crashed.

The difference between hangcheck & watchdog is, I think that Watchdog watches the kernel, and hangcheck can be used by any module. i915 sure uses it. Google hangcheck timer. These two look good.

http://ubuntuforums.org/showthread.php?t=1739646
http://askubuntu.com/questions/40056...apsed-gpu-hung
 
1 members found this post helpful.
Old 03-23-2015, 08:16 PM   #12
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
Thanks for the links, I noticed these two reference pretty old versions of Ubuntu. Today an updated Ubuntu kernel was downloaded and instead of going back to the 4.0....rc4 I instead installed 3.13.0-48-generic #80-Ubuntu SMP Thu Mar 12 11:16:15 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux there was a newer 4.0...rc5 out dated today, I installed and booted into that however some of my gnome tweak tools settings would not work correctly. I haven't heard anything from the guy on Ubuntu Launchpad in a few days now since I asked how I was supposed to do the work on my system that I have to do daily while regressing to a version a couple of years old.
 
Old 03-24-2015, 05:43 AM   #13
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,292

Rep: Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322Reputation: 2322
Ok - they're doing nothing in Ubuntu.

Probably why is that a hangcheck error tells them "There has been some crash" but not what the crash was about. Have you tried disabling hangcheck? Ther you'll get a proper GPU crash which might tell you what the error is.

Google 'i915 disable hangcheck' as I did and you'll find a patch, and loads of instructions andf wheezes to do just that. Then you'll find the real error.
 
Old 03-24-2015, 07:47 AM   #14
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
I don't think they are at freedesktop either from what I can see. I'm going to re-join the intel-gfx mailing list this morning and ask just what can be done or is being done about the error. I did a search on their list for 'hangcheck render ring idle' and got quite a few hits. As far as a doing a patch to disable hangcheck I sometimes find myself very unsure when it comes to doing certain things even though I've shouldn't be as many years as I've been running Linux.
 
Old 03-31-2015, 10:42 PM   #15
jayjwa
Member
 
Registered: Jul 2003
Location: NY
Distribution: Slackware, Termux
Posts: 774

Rep: Reputation: 243Reputation: 243Reputation: 243
Lots of people have had problems with this driver/chipset combo. I have a Brookdale 82845G here that I had very similar problems with for years. As far as I can tell, the problem is either in the inteldrmfb code, or perhaps the Xwindow/drm 915 code. Like you, I tried everything I could think of but nothing worked in a stable sense. My advise would be to either get a new video card, hold your nose and use the VESA fb console and VESA driver for X11, or get used to the command line. Support under Linux for this chipset family is just out-and-out flakey.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
kernel 3.2.45 Slack14 x86_64 - drm:i915_hangcheck_elapsed] *ERROR* ... GPU hung geep999 Slackware 10 06-04-2013 07:37 AM
[SOLVED] Error message with graphic card: i915_hangcheck_elapsed GPU hung peterlu Linux - Hardware 2 05-11-2013 12:34 PM
drm i915 hangcheck in Ubuntu 11.04, Unity 3d, system updated. Video intel 965. oblador Ubuntu 4 10-28-2011 07:23 AM
Hangcheck timer elapsed ... GPU hung kidsin Debian 6 08-29-2011 02:50 AM
Gentoo - disable DRM in the kernel for x11-drm-20070314 nuwen52 Linux - Software 1 06-11-2009 01:32 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software > Linux - Kernel

All times are GMT -5. The time now is 02:24 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration