Hi,
I know that this topic has been discussed several times over and over. I am having nVidia Driver problems since I first installed linux about two weeks ago (SimplyMepis 6.5 currently, PCLinuxOS before). The only drive that does work is the 'nv' driver. I have gone into IRC, searched google, searched these forums and several other ones and cannot get the 9631 drivers to work. The farthest I have gotten is the black screen bugs?, and a yellow screen with lines. Both had audio, but no video, and I could not make X die so I could revert the xorg.conf. Most of the other times I usually get Screen not found 0:0 or something of the such.
This is on a Dell 8200 Inspiron Laptop.
Configuration:
Intel P4 ~ 1.5gHz
768 RAM
GeForce 4 440 Go
(Under lspci)
Code:
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go] (rev a3)
Dual booting with Windows XP, though I do not believe that it will matter with that.
This is my Current xorg.conf
Code:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 440 Go]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Dell Inspiron 8200"
Option "DPMS"
HorizSync 30-75
VertRefresh 50-85
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 440 Go]"
Monitor "Dell Inspiron 8200"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
This is my nVidia xorg.conf:
Code:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
#Screen 0 "ATIScreen" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
#Option "Xinerama" "true"
#Option "Clone" "true"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "SendCoreEvents"
InputDevice "ALPS Touchpad" "SendCoreEvents"
#InputDevice "Appletouch" "SendCoreEvents"
#InputDevice "Stylus" "SendCoreEvents"
#InputDevice "Eraser" "SendCoreEvents"
#InputDevice "Cursor" "SendCoreEvents"
#InputDevice "Serial Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
# Xorg 7.0 font paths
FontPath "/usr/share/X11/fonts/misc:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
# Legacy font paths
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
# Other font paths
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/kochi"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "dbe"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XKbOptions" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "ALPS Touchpad"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "event"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.25"
Option "MaxSpeed" "0.50"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "Appletouch"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "100"
Option "RightEdge" "1120"
Option "TopEdge" "50"
Option "BottomEdge" "310"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapMove" "220"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "MinSpeed" "0.79"
Option "MaxSpeed" "0.88"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Relative"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection
Section "Monitor"
Identifier "Monitor0"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-82
VertRefresh 55-70
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-82
VertRefresh 55-70
EndSection
Section "Monitor"
Identifier "ATIMonitor"
VendorName "unknown"
ModelName "unknown"
Option "DPMS" "true"
HorizSync 30-82
VertRefresh 55-70
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BoardName "unknown"
Screen 0
#Option "UseDisplayDevice" "dfp"
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Option "UseInternalAGPGART" "no"
# savage special options, use with care
#Option "NoUseBios"
#Option "BusType" "PCI"
Option "DmaMode" "None"
# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "false"
Option "UseEDID" "true"
Option "AddARGBGLXVisuals" "true"
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
BoardName "unknown"
Screen 1
#Option "MonitorLayout" "crt,crt"
#BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 8
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-82"
Option "SecondMonitorVertRefresh" "55-70"
#Option "MetaModes" "1024x768, 1024x768"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultColorDepth 24
SubSection "Display"
Depth 8
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "ATIScreen"
Device "Card0"
Monitor "ATIMonitor"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1450x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Under 'xdpyinfo':
Code:
vincent@2[acpi]$ xdpyinfo
name of display: :0.0
version number: 11.0
vendor string: The X.Org Foundation
vendor release number: 70101000
X.Org version: 7.1.1
maximum request size: 16777212 bytes
motion buffer size: 256
bitmap unit, bit order, padding: 32, LSBFirst, 32
image byte order: LSBFirst
number of supported pixmap formats: 7
supported pixmap formats:
depth 1, bits_per_pixel 1, scanline_pad 32
depth 4, bits_per_pixel 8, scanline_pad 32
depth 8, bits_per_pixel 8, scanline_pad 32
depth 15, bits_per_pixel 16, scanline_pad 32
depth 16, bits_per_pixel 16, scanline_pad 32
depth 24, bits_per_pixel 32, scanline_pad 32
depth 32, bits_per_pixel 32, scanline_pad 32
keycode range: minimum 8, maximum 255
focus: window 0x2800005, revert to PointerRoot
number of extensions: 28
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
Extended-Visual-Information
MIT-SCREEN-SAVER
MIT-SHM
MIT-SUNDRY-NONSTANDARD
RANDR
RECORD
RENDER
SECURITY
SHAPE
SYNC
TOG-CUP
X-Resource
XC-APPGROUP
XC-MISC
XFIXES
XFree86-Bigfont
XFree86-DGA
XFree86-Misc
XFree86-VidModeExtension
XInputExtension
XKEYBOARD
XTEST
XVideo
default screen number: 0
number of screens: 1
screen #0:
dimensions: 1600x1200 pixels (423x318 millimeters)
resolution: 96x96 dots per inch
depths (7): 16, 1, 4, 8, 15, 24, 32
root window id: 0x5d
depth of root window: 16 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 64
preallocated pixels: black 0, white 65535
options: backing-store NO, save-unders NO
largest cursor: 64x64
current input event mask: 0xfa4031
KeyPressMask EnterWindowMask LeaveWindowMask
KeymapStateMask StructureNotifyMask SubstructureNotifyMask
SubstructureRedirectMask FocusChangeMask PropertyChangeMask
ColormapChangeMask
number of visuals: 3
default visual id: 0x21
visual:
visual id: 0x21
class: TrueColor
depth: 16 planes
available colormap entries: 64 per subfield
red, green, blue masks: 0xf800, 0x7e0, 0x1f
significant bits in color specification: 8 bits
visual:
visual id: 0x22
class: DirectColor
depth: 16 planes
available colormap entries: 64 per subfield
red, green, blue masks: 0xf800, 0x7e0, 0x1f
significant bits in color specification: 8 bits
visual:
visual id: 0x5b
class: TrueColor
depth: 32 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
Hopefully I have pasted enough information. If possible I would like to see beryl running, but mainly, I need to get this running for games and applications. I honestly need help if anyone can lead me into the right way. What I need to do, get, whatever. Even reformatting these partitions and reinstalling Mepis.
Thank you in advance,
Vincent