The NanoPC-T3 octa-core single board computer is designed and developed by FriendlyARM for professional and enterprise users. It uses the Samsung Octa-Core Cortex-A53 S5P6818 SoC. Compared to the FriendlyARM NanoPC-T2 the NanoPC-T3 not only has all the T2’s interfaces and ports but also has a more powerful SoC. Its dynamic frequency scales from 400M up to 1.4GHz. The NanoPC-T3 has 8G eMMC onboard, audio jack, video input/output interfaces, built-in WiFi, Bluetooth and Gbps Ethernet port. In addition the NanoPC-T3 has power management, on board porcelain antenna and serial debug port. To avoid overheat issues the NanoPC-T3 has a heat sink with mounting holes.

The NanoPC-T3 has two camera interfaces: a DVP camera interface and a MIPI-CSI interface, and four video interfaces: HDMI 1.4A, LVDS, parallel RGB-LCD interface and MIPI-DSI interface. It supports RTC and has RTC interface pins. It has four USB ports with two being type A ports and two being 2.54mm pitch pin-headers.

The NanoPC-T3 supports muitple OS systems e.g. Android5.1, Debian and UbuntoCore+Qt. It is an open source project with rich interfaces and ports. It is born a choice for professional and enterprise users.




Features

SoC: Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz - 1.4G Hz
Power Management Unit: AXP228 PMU, it supports software power-off and wake-up.
System Memory: 1GB/2GB 32bit DDR3 RAM
Storage: 1 x SD Card Socket
Ethernet: Gbit Ethernet(RTL8211E)
WiFi: 802.11b/g/n
Bluetooth: 4.0 dual mode
Antenna: Porcelain Antenna IPX Interface
eMMC: 8GB
Video Input: DVP Camera/MIPI-CSI (two camera interfaces)
Video Output: HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces)
Audio: 3.5 mm audio jack / via HDMI
Microphone: onboard Microphone
USB Host: 4 x USB 2.0 Host, two type A ports and two 2.54 mm pitch pin-headers
MicroUSB: 1 x MicroUSB 2.0 Client, Type A
LCD Interface: 0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8
HDMI: 1.4A Type A, 1080P
DVP Camera: 0.5mm pitch 24 pin FPC seat
GPIO: 2.54 mm pitch 30 pin-header
Serial Debug Port: 2.54mm pitch 4-pin-header
User Key: K1 (power), Reset
LED: 1 x power LED and 2 x GPIO LED
Other Resources: CPU’s internal TMU
RTC Battery: RTC Battery Seat
Heat Sink: 1 x Heat Sink with mounting holes
Power: DC 5V/2A
PCB: Six Layer
Dimension: 100 mm x 60 mm
OS/Software: uboot, Android and Debian





More NanoPC-T2 Information

you can read :Friendlyarm-NanoPC-T3 http://www.friendlyarm.com/index.php...product_id=103



NanoPi 2 Fire more OS support

NanoPi 2 Fire supports more OS such as UbuntuCore with Qt 、Android5.1、Debian8.1，and more other OS by enthusiasts.

The other OS include Kali，Ubuntu-Mate，Android-Remixos.



==Source Code and Image Files Download Links==

* Image File:[https://www.mediafire.com/folder/gg7...noPC-T3_Board]

* Source Code:[https://github.com/friendlyarm]



==Resources==

*SOC Datasheet: [http://wiki.friendlyarm.com/wiki/ima...y_Ver_0.00.pdf S5P6818 Datasheet]

*Schematic: [http://wiki.friendlyarm.com/wiki/ima...-Schematic.pdf NanoPC-T3 Schematic]

*PCB Dimension: [http://wiki.friendlyarm.com/wiki/ima...s%28dxf%29.zip NanoPC-T3-Dimensions(dxf)]

Very close to advertising. Referrred to the mods