LinuxQuestions.org
Review your favorite Linux distribution.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page Notebook HP Compaq nx6310 - LFS - alsaconf not detect Intel 82801G
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 10-10-2007, 01:51 PM   #1
glaudiston
LQ Newbie
 
Registered: Jun 2006
Posts: 9

Rep: Reputation: 0
Unhappy Notebook HP Compaq nx6310 - LFS - alsaconf not detect Intel 82801G

Hi all,

I've make a LinuxFromScratch for my notebook HP Compaq nx6310... it's great... the boot is flash... =)

but my audio not work... =(

Code:
~ # lspci | grep -i Audio
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
.config of my linux kernel (2.6.22.5)
Code:
~ # cat /boot/config-2.6.22.5 | grep -i SND
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
CONFIG_SND_SOC=y
hotplug:
Code:
~ # /etc/init.d/hotplug status
INPUT status for kernel:  Linux 2.6.22.5 i686

INPUT devices:
I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=button_power/button/input0
H: Handlers=kbd event0 
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
H: Handlers=kbd event1 
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
H: Handlers=event2 
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event3 
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
H: Handlers=mouse0 event4 

INPUT handlers:
N: Number=0 Name=kbd
N: Number=1 Name=mousedev Minor=32
N: Number=2 Name=evdev Minor=64
N: Number=3 Name=joydev Minor=0

PCI Status for kernel:  Linux 2.6.22.5 i686

PCI up; bus count is 3


USB Status for kernel:  Linux 2.6.22.5 i686

USB up; bus count is 4
T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.3
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.5 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

USB Drivers Loaded: 
adutux
appledisplay
auerswald
berry_charge
cdc_acm
cypress_cy7c63
cytherm
emi26 - firmware loader
emi62 - firmware loader
ftdi-elan
hiddev
hub
idmouse
iowarrior
ldusb
legousbtower
libusual
mdc800
microtekX6
ndiswrapper
phidgetkit
phidgetmotorcontrol
phidgetservo
rio500
sisusb
trancevibrator
usb
usbfs
usbhid
usblcd
usbled
usblp
usb-storage
usbtest

khubd/hotplug thread: 
F S   UID   PID  PPID  C PRI  NI ADDR SZ WCHAN  TTY          TIME CMD
1 S     0   281     2  0  70  -5 -     0 hub_th ?        00:00:00 khubd

Module                  Size  Used by
joydev                  8512  0 
ndiswrapper           181404  0 
vmnet                  27812  19 
vmblock                12704  4 
vmmon                1817100  6
alsaconf:
Code:
  No supported PnP or PCI card found.

  Would you like to probe legacy ISA sound cards/chips?
Any Idea??
Very thanks for any help.
 
Old 10-10-2007, 03:34 PM   #2
kaz2100
Senior Member
 
Registered: Apr 2005
Location: Penguin land, with apple, no gates
Distribution: SlackWare > Debian testing woody(32) sarge etch lenny squeeze(+64) wheezy .. bullseye bookworm
Posts: 1,834

Rep: Reputation: 108Reputation: 108
Hya,

Is modules attached? lshw can tell.

Happy Penguins!
 
Old 10-10-2007, 04:48 PM   #3
glaudiston
LQ Newbie
 
Registered: Jun 2006
Posts: 9

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by kaz2100 View Post
Hya,

Is modules attached? lshw can tell.

Happy Penguins!

yes... the module is attached... after a search here in lq, I found the topic:
http://www.linuxquestions.org/questi...1.0.14-561009/

this resolve my question...

as a module the snd-hda-intel works...

but there is no way to use this option attached ? anything as a kernel boot option... only for curiosity =)
 
Old 10-11-2007, 08:49 AM   #4
kaz2100
Senior Member
 
Registered: Apr 2005
Location: Penguin land, with apple, no gates
Distribution: SlackWare > Debian testing woody(32) sarge etch lenny squeeze(+64) wheezy .. bullseye bookworm
Posts: 1,834

Rep: Reputation: 108Reputation: 108
Hya,

Good.

The way to attach these option(s) is: to edit /etc/modprobe.d/sound file (file name may be different, look for the one which has snd-hda-intel. then add:
Code:
options snd-hda-intel model=3stack
Happy Penguins!
 
  


Reply

Tags
alsaconf



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
(gentoo) onboard intel 82801G audio - no device Argent Linux - Hardware 4 07-08-2007 01:44 PM
Sound card not detected - Intel 82801G, ALSA 1.0.14 as2100 Linux - Hardware 5 06-11-2007 10:21 PM
fc6 intel 82801g sound card problems phaedrusarphan Linux - Hardware 1 01-28-2007 06:40 PM
How to get a Intel 82801G sound card to work after installation dussel Linux - Hardware 4 05-22-2006 11:43 PM
Alsaconf can't detect Intel 810 integrated sound ekolis Debian 4 06-12-2005 02:03 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 12:38 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration