LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 01-02-2005, 08:01 PM   #1
yhubu
LQ Newbie
 
Registered: Jan 2005
Distribution: Mandrakw 10.1
Posts: 21

Rep: Reputation: 15
No Sound after 1st reboot


Hey all, hope that someone can help me out...

I am running Mandrake 10.1, just installed AGAIN. Here are the problems

After install everything works.. nice sound, mouse with the wheel EVERYTHING

after I shutdown and come back up.. sound is gone mouse is gone... I get a KMIX crash or something.

I have a Sound Blaster Audigy MP3 card.. which IS detected see below

Identification
Vendor: Creative Labs

Description: EMU10K2 Audigy Audio Processor

Media class: MULTIMEDIA_AUDIO

Connection
Bus: PCI

Bus PCI #: 2

PCI device #: 10

PCI function #: 0

Vendor ID: 4354

Device ID: 4

Sub vendor ID: 4354

Sub device ID: 81

Driver
Module: snd-emu10k1

Alternative drivers: audigy, emu10k1

The mouse is a Logitech Wireless Optical...

Connection
Bus: isa

Vendor ID: 0002

Device ID: 0006

Features
Emulated wheel: No

Misc
Vendor:

Description: ImExPS/2 Logitech Explorer Mouse

Module: mouse0

PLEASE HELP ME, reconfiguring the mouse is a pain I can grunt live with but the sound I NEED.
 
Old 01-02-2005, 08:54 PM   #2
yhubu
LQ Newbie
 
Registered: Jan 2005
Distribution: Mandrakw 10.1
Posts: 21

Original Poster
Rep: Reputation: 15
More info


output of dmesg

e: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515292k/524204k available (1859k kernel code, 8164k reserved, 578k data, 200k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3383.29 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1707.0311 MHz.
..... host bus clock speed is 100.0430 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 175k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0e90, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:02:0a.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:02:0a.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:02:0a.2
PCI: Sharing IRQ 9 with 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:0b.0
vesafb: framebuffer at 0xf0000000, mapped to 0xe0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:51b6
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1104716472.195:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: MAXTOR 6L040J2, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W8432T, ATAPI CD/DVD-ROM drive
hdd: Disabling (U)DMA for PLEXTOR CD-R PX-W8432T (blacklisted)
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:1f.2
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 9, io base 0000a400
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:0a.2
PCI: Sharing IRQ 9 with 0000:02:0b.0
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 9, io base 0000a000
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using address 2
Linux video capture interface: v1.00
pwc Philips webcam module version 9.0.1 loaded.
pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc Logitech QuickCam 4000 Pro USB webcam detected.
pwc Registered as /dev/video0.
usbcore: registered new driver Philips webcam
EXT3 FS on hda1, internal journal
Adding 1124508k swap on /dev/hda5. Priority:-1 extents:1
usb 1-2: control timeout on ep0out
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf8000000
usb 1-2: control timeout on ep0out
usb 1-2: control timeout on ep0out
usbcore: registered new driver snd-usb-audio
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices)
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:02:0a.2 (0014 -> 0016)
PCI: Found IRQ 9 for device 0000:02:0a.2
PCI: Sharing IRQ 9 with 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:0b.0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[ee800000-ee8007ff] Max Packet=[2048]
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0021031ee2]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
bootsplash: status on console 0 changed to on
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 328 bytes per conntrack
NET: Registered protocol family 17
PCI: Found IRQ 9 for device 0000:02:0b.0
PCI: Sharing IRQ 9 with 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:0a.2
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:0b.0: 3Com PCI 3c905C Tornado at 0xb000. Vers LK1.1.19
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0322b60(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x100000
PCI: Found IRQ 11 for device 0000:01:00.0
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x100000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
pwc Failed to set LED on/off time.
pwc set_video_mode(176x144 @ 10, palette 15).
pwc decode_size = 1.
eth0: no IPv6 routers present
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 5 changed to on
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(176x144 @ 10, palette 15).
pwc decode_size = 1.
inserting floppy driver for 2.6.8.1-12mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pwc Frame buffer underflow (21825 bytes); discarded.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Closing video device: 1977 frames received, dumped 0 frames, 3 frames with errors.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc set_video_mode(176x144 @ 10, palette 15).
pwc decode_size = 1.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
pwc Frame buffer underflow (21825 bytes); discarded.
 
Old 01-02-2005, 08:56 PM   #3
yhubu
LQ Newbie
 
Registered: Jan 2005
Distribution: Mandrakw 10.1
Posts: 21

Original Poster
Rep: Reputation: 15
/sbin/lspci = bash: /sbin/lspci: No such file or directory
 
Old 01-03-2005, 09:48 AM   #4
yhubu
LQ Newbie
 
Registered: Jan 2005
Distribution: Mandrakw 10.1
Posts: 21

Original Poster
Rep: Reputation: 15
when I try to launch KMIX from the shell I get:

Link points to "/tmp/ksocket-root"
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
Link points to "/tmp/kde-root"
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
kbuildsycoca running...
kmix: ERROR: Alsa mixer cannot be found.
Please check that the soundcard is installed and the
soundcard driver is loaded.
kmix:
kmix: ERROR: Alsa mixer cannot be found.
Please check that the soundcard is installed and the
soundcard driver is loaded.
kmix:
DCOP aborting (delayed) call from 'anonymous-14161' to 'kmix'
ERROR: Communication problem with kmix, it probably crashed.
[root@CPE0004759bdfcd-CM000039c31a5e Desktop]# KCrash: Application 'kmix' crashing...
Mutex destroy failure: Device or resource busy
ICE default IO error handler doing an exit(), pid = 14172, errno = 0
 
Old 07-17-2005, 05:28 AM   #5
netsurf
Member
 
Registered: Nov 2004
Location: UK
Distribution: ubuntu 10.04+ distro hopping
Posts: 181

Rep: Reputation: 31
just an idea try unpluging your webcam i had problems with mine on linux suse 9.1 it was trying to use webcam as audio device
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
SUSE 9.2 sound goes away after reboot!!! gionni25 SUSE / openSUSE 14 03-11-2005 02:47 PM
sound goes out after each reboot.(sb audigy 2 ze) gonus Linux - Hardware 2 02-23-2005 06:29 PM
Suse9.1/ALSA/Audigy/No Sound/I run alsaconf after reboot(s) to get sound FastFeet Linux - Hardware 23 07-12-2004 05:01 PM
no sound after reboot (after upgrade) Gates1026 Linux - General 8 03-11-2004 11:33 PM
no sound, no internet after reboot xbone Linux - General 5 02-05-2002 08:49 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 12:55 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration