LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page Connecting phones to computer via bluetooth
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 10-03-2009, 07:17 PM   #1
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Rep: Reputation: 21
Connecting phones to computer via bluetooth

Hopefully I'm going to provide all or at least most of the necessary information. I have two phones, a Motorola EM330 and a Nokia 2600 that I want to transfer files from to my Mandriva 2009.1 box running Gnome 2.26.1. Using Gnome's bluetooth preferences setup both phones are seen by the computer as shown on the attached screenshot. Looking at the device detaila on the Motorola it shows a name of localhost-0, type computer, access automatic so it can also 'see' the computer. When I try to send a picture from the phone to the computer and select 'look for device' on the phone it scans but does not find the computer (No devices found). However, I can send a file from the computer to either phone using the bluetooth connection and Nautilus. When 'send to' is selected I've given a choice of the Motorola or Nokia phone. Some, I hope, useful information is below:

Output of lsusb:

[root@localhost ~]# lsusb
Bus 005 Device 052: ID 0a5c:2148 Broadcom Corp.
Bus 005 Device 051: ID 0a5c:4503 Broadcom Corp.
Bus 005 Device 050: ID 0a5c:4502 Broadcom Corp.
Bus 005 Device 049: ID 0a5c:4500 Broadcom Corp.
Bus 005 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg outputs that seem to pertain:

usb 1-8: USB disconnect, address 13
usb 5-2: new full speed USB device using uhci_hcd and address 23
usb 5-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: BCM2046B1
usb 5-2: Manufacturer: Broadcom
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new full speed USB device using uhci_hcd and address 24
usb 5-2.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 5-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input5
generic-usb 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:10.3-2.1/input0
usb 5-2.2: new full speed USB device using uhci_hcd and address 25
usb 5-2.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 5-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.2/5-2.2:1.0/input/input6
generic-usb 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:10.3-2.2/input0
usb 5-2.3: new full speed USB device using uhci_hcd and address 26
usb 5-2.3: New USB device found, idVendor=0a5c, idProduct=2148
usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.3: Product: BCM92046DG-CL1ROM
usb 5-2.3: Manufacturer: Broadcom Corp
usb 5-2.3: SerialNumber: 000272A2C29E
usb 5-2.3: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.4
usbcore: registered new interface driver btusb
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
usb 5-2.1: input irq status -75 received
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
usb 5-2.1: input irq status -75 received
usb 5-2.1: input irq status -75 received
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
mtrr: no MTRR for e0000000,4000000 found
usb 5-2: USB disconnect, address 23
usb 5-2.1: USB disconnect, address 24
usb 5-2.2: USB disconnect, address 25
usb 5-2.3: USB disconnect, address 26
btusb_intr_complete: hci0 urb eeba0f00 failed to resubmit (19)
btusb_send_frame: hci0 urb ed45be80 submission failed
usb 5-2: new full speed USB device using uhci_hcd and address 27
usb 5-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: BCM2046B1
usb 5-2: Manufacturer: Broadcom
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new full speed USB device using uhci_hcd and address 28
usb 5-2.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 5-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input7
generic-usb 0003:0A5C:4502.0004: input,hidraw1: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:10.3-2.1/input0
usb 5-2.2: new full speed USB device using uhci_hcd and address 29
usb 5-2.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 5-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.2/5-2.2:1.0/input/input8
generic-usb 0003:0A5C:4503.0005: input,hidraw2: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:10.3-2.2/input0
usb 5-2.3: new full speed USB device using uhci_hcd and address 30
usb 5-2.3: New USB device found, idVendor=0a5c, idProduct=2148
usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.3: Product: BCM92046DG-CL1ROM
usb 5-2.3: Manufacturer: Broadcom Corp
usb 5-2.3: SerialNumber: 000272A2C29E
usb 5-2.3: configuration #1 chosen from 1 choice
usb 5-2: USB disconnect, address 27
usb 5-2.1: USB disconnect, address 28
usb 5-2.2: USB disconnect, address 29
usb 5-2.3: USB disconnect, address 30
btusb_intr_complete: hci0 urb eaaf4400 failed to resubmit (19)
btusb_send_frame: hci0 urb de248d00 submission failed
usb 5-2: new full speed USB device using uhci_hcd and address 31
usb 5-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: BCM2046B1
usb 5-2: Manufacturer: Broadcom
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new full speed USB device using uhci_hcd and address 32
usb 5-2.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 5-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input9
generic-usb 0003:0A5C:4502.0006: input,hidraw1: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:10.3-2.1/input0
usb 5-2.2: new full speed USB device using uhci_hcd and address 33
usb 5-2.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 5-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.2/5-2.2:1.0/input/input10
generic-usb 0003:0A5C:4503.0007: input,hidraw2: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:10.3-2.2/input0
usb 5-2.3: new full speed USB device using uhci_hcd and address 34
usb 5-2.3: New USB device found, idVendor=0a5c, idProduct=2148
usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.3: Product: BCM92046DG-CL1ROM
usb 5-2.3: Manufacturer: Broadcom Corp
usb 5-2.3: SerialNumber: 000272A2C29E
usb 5-2.3: configuration #1 chosen from 1 choice
usb 5-2.1: input irq status -75 received
usb 5-2.1: input irq status -75 received
usb 5-2.1: input irq status -75 received
usb 5-2: USB disconnect, address 31
usb 5-2.1: USB disconnect, address 32
btusb_intr_complete: hci0 urb eed78b00 failed to resubmit (19)
usb 5-2.2: USB disconnect, address 33
usb 5-2.3: USB disconnect, address 34
btusb_send_frame: hci0 urb eee80280 submission failed
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
usb 5-2: new full speed USB device using uhci_hcd and address 35
usb 5-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: BCM2046B1
usb 5-2: Manufacturer: Broadcom
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new full speed USB device using uhci_hcd and address 36
usb 5-2.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 5-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input11
generic-usb 0003:0A5C:4502.0008: input,hidraw1: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:10.3-2.1/input0
usb 5-2.2: new full speed USB device using uhci_hcd and address 37
usb 5-2.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 5-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.2/5-2.2:1.0/input/input12
generic-usb 0003:0A5C:4503.0009: input,hidraw2: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:10.3-2.2/input0
usb 5-2.3: new full speed USB device using uhci_hcd and address 38
usb 5-2.3: New USB device found, idVendor=0a5c, idProduct=2148
usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.3: Product: BCM92046DG-CL1ROM
usb 5-2.3: Manufacturer: Broadcom Corp
usb 5-2.3: SerialNumber: 000272A2C29E
usb 5-2.3: configuration #1 chosen from 1 choice
usb 5-2.1: input irq status -75 received
usb 5-2.1: input irq status -75 received
usb 5-2.1: input irq status -75 received
usb 5-2: USB disconnect, address 35
usb 5-2.1: USB disconnect, address 36
usb 5-2.2: USB disconnect, address 37
usb 5-2.3: USB disconnect, address 38
btusb_intr_complete: hci0 urb de239c00 failed to resubmit (19)
btusb_send_frame: hci0 urb ef3fc780 submission failed
mtrr: no MTRR for e0000000,4000000 found
usb 5-2: new full speed USB device using uhci_hcd and address 39
usb 5-2: New USB device found, idVendor=22b8, idProduct=41a1
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: EM330 Mobile
usb 5-2: Manufacturer: MOTOROLA
usb 5-2: configuration #1 chosen from 1 choice
cdc_acm: probe of 5-2:1.0 failed with error -22
usb 5-2: USB disconnect, address 39
usb 5-2: new full speed USB device using uhci_hcd and address 40
usb 5-2: New USB device found, idVendor=22b8, idProduct=41a0
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: EM330 Mobile
usb 5-2: Manufacturer: MOTOROLA
usb 5-2: SerialNumber: 0123456789ABCDEF
usb 5-2: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 40
usb-storage: waiting for device to settle before scanning
scsi 10:0:0:0: Direct-Access MOTOROLA Mobile Phone 03e8 PQ: 0 ANSI: 2
sd 10:0:0:0: [sdc] 13968 1024-byte hardware sectors: (14.3 MB/13.6 MiB)
sd 10:0:0:0: [sdc] Write Protect is off
sd 10:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
sd 10:0:0:0: [sdc] Assuming drive cache: write through
sd 10:0:0:0: [sdc] 13968 1024-byte hardware sectors: (14.3 MB/13.6 MiB)
sd 10:0:0:0: [sdc] Write Protect is off
sd 10:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
sd 10:0:0:0: [sdc] Assuming drive cache: write through
sdc:
sd 10:0:0:0: [sdc] Attached SCSI removable disk
sd 10:0:0:0: Attached scsi generic sg4 type 0
scsi 10:0:0:1: Direct-Access MOTOROLA Mobile Phone 03e8 PQ: 0 ANSI: 2
sd 10:0:0:1: [sdd] Attached SCSI removable disk
sd 10:0:0:1: Attached scsi generic sg5 type 0
usb-storage: device scan complete
sd 10:0:0:1: ioctl_internal_command return code = 8000002
: Sense Key : No Sense [current]
: Add. Sense: No additional sense information
usb 5-2: USB disconnect, address 40
usb 5-2: new full speed USB device using uhci_hcd and address 41
usb 5-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: BCM2046B1
usb 5-2: Manufacturer: Broadcom
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new full speed USB device using uhci_hcd and address 42
usb 5-2.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 5-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input13
generic-usb 0003:0A5C:4502.000A: input,hidraw1: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:10.3-2.1/input0
usb 5-2.2: new full speed USB device using uhci_hcd and address 43
usb 5-2.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 5-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2.2/5-2.2:1.0/input/input14
generic-usb 0003:0A5C:4503.000B: input,hidraw2: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:10.3-2.2/input0
usb 5-2.3: new full speed USB device using uhci_hcd and address 44
usb 5-2.3: New USB device found, idVendor=0a5c, idProduct=2148
usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.3: Product: BCM92046DG-CL1ROM
usb 5-2.3: Manufacturer: Broadcom Corp
usb 5-2.3: SerialNumber: 000272A2C29E
usb 5-2.3: configuration #1 chosen from 1 choice
usb 5-2.1: input irq status -75 received
usb 5-2.1: input irq status -75 received

There may be too much in the above or maybe not enough but I've included what appears to be the info on the bluetooth adapter (IOGear model GBU421WM Bluetooth 2.1 USB Micro Adapter).

Thanks for any help/advice/suggestions. I can hard link the Motorola to the box via a mini-usb cable but not the Nokia.

Chris
Attached Thumbnails
Click image for larger version Name: bluetooth.png Views: 17 Size: 37.0 KB ID: 1665   Click image for larger version Name: bluetooth2.png Views: 14 Size: 18.3 KB ID: 1666  
 
Old 10-03-2009, 08:26 PM   #2
MS3FGX
LQ Guru
 
Registered: Jan 2004
Location: NJ, USA
Distribution: Slackware, Debian
Posts: 5,852

Rep: Reputation: 361Reputation: 361Reputation: 361Reputation: 361
So the problem is that you can't receive files from the phones, but you can send them to the phones? To receive files you need to be running an OBEX server, I am not sure that Mandriva includes this by default as I have never worked with it. But I am pretty sure this is not a problem with any specific hardware, it is an issue with what services your computer is offering.

You can check which Bluetooth profiles your system is advertising with the command:

Code:
sdptool browse local
You are looking for either OBEX Push or OBEX File Transfer to be listed. If you don't see either of those, then that is the problem.

P.S.

For the future, if you are going to post very long bits of information like that dmesg output, you should put them in CODE tags so they are easier to scroll through and don't take up so much space on the page.
 
Old 10-03-2009, 10:12 PM   #3
Toadman
Member
 
Registered: Aug 2002
Location: Copperas Cove, Texas
Distribution: Ubuntu 20.04 LTS
Posts: 304

Original Poster
Rep: Reputation: 21
Here is the output of sdptool browse local:

Code:
[root@localhost ~]# sdptool browse local
Browsing FF:FF:FF:00:00:00 ...
Service Name: AVRCP TG
Service RecHandle: 0x10000
Service Class ID List:
  "AV Remote Target" (0x110c)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 23
  "AVCTP" (0x0017)
    uint16: 0x100
Profile Descriptor List:
  "AV Remote" (0x110e)
    Version: 0x0100

Service Name: AVRCP CT
Service RecHandle: 0x10001
Service Class ID List:
  "AV Remote" (0x110e)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 23
  "AVCTP" (0x0017)
    uint16: 0x100
Profile Descriptor List:
  "AV Remote" (0x110e)
    Version: 0x0100

Service Name: BlueZ PANU service
Service Description: BlueZ PAN service
Service RecHandle: 0x10002
Service Class ID List:
  "PAN User" (0x1115)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 15
  "BNEP" (0x000f)
    Version: 0x0100
    SEQ16: 800 806
Language Base Attr List:
  code_ISO639: 0x656e
  encoding:    0x6a
  base_offset: 0x100
Profile Descriptor List:
  "PAN User" (0x1115)
    Version: 0x0100

Service Name: BlueZ GN service
Service Description: BlueZ PAN service
Service RecHandle: 0x10003
Service Class ID List:
  "PAN Group Network" (0x1117)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 15
  "BNEP" (0x000f)
    Version: 0x0100
    SEQ16: 800 806
Language Base Attr List:
  code_ISO639: 0x656e
  encoding:    0x6a
  base_offset: 0x100
Profile Descriptor List:
  "PAN Group Network" (0x1117)
    Version: 0x0100

Service Name: BlueZ NAP service
Service Description: BlueZ PAN service
Service RecHandle: 0x10004
Service Class ID List:
  "Network Access Point" (0x1116)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 15
  "BNEP" (0x000f)
    Version: 0x0100
    SEQ16: 800 806
Language Base Attr List:
  code_ISO639: 0x656e
  encoding:    0x6a
  base_offset: 0x100
Profile Descriptor List:
  "Network Access Point" (0x1116)
    Version: 0x0100
I don't see any reference in the above to OBEX.
I have the following packages containing 'obex' installed:

obexftp-0.23-1mdv2009.1
cs_obexftp-1.0.0.18-2mdv2009.1
openobex-apps-1.5-1mdv2009.1
obexfs-0.11-1mdv2009.0
openobex-ircp-1.5-1mdv2009.1
libobexftp-devel-0.23-1mdv2009.1
obex-data-server-0.4.4-1mdv2009.1
libobexftp0-0.23-1mdv2009.1
libopenobex-devel-1.5-1mdv2009.1
python-obexftp-0.23-1mdv2009.1
libopenobex1-1.5-1mdv2009.1
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
is their any software for connecting internet via bluetooth with linux sunny sharma Linux - Newbie 1 07-07-2008 03:35 AM
bluetooth refuses to pair with mobile phones for obex transfer (fc6) netsurf Linux - Hardware 0 04-23-2007 05:13 PM
Bluetooth cell phones on linux Torr Linux - Hardware 4 09-23-2006 12:57 AM
Bluetooth headset not connecting Kubuntu Frank Leone Linux - Newbie 1 07-10-2006 11:24 AM
Connecting Palm to PC using bluetooth radical_edward Linux - Networking 2 03-06-2006 12:26 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 07:24 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration