Black screen
My computer shipped with nVidia Quadro FX and a Dell 1800FP flat panel monitor and was loaded with RH9. I recently refreshly installed FC1 on it. Then the digital output via DVI port stopped working, with an annoying "power saving mode" message, while the analog mode still works fine. Can anybody offer any sort of help? I really appreciate it.
----XF86Config----
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell 1800FP (Digital)"
DisplaySize 360 290
HorizSync 30.0 - 70.0
VertRefresh 56.0 - 85.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA Quadro FX (generic)"
EndSection
----end----
Here is the monitor part in XFree86.0.log, I don't know why that it recoganize my display as an analog one.
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): DDC Monitor info: 0x9a81540
(II) NV(0): Manufacturer: DEL Model: e002 Serial#: 808531289
(II) NV(0): Year: 2003 Week: 26
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
________------------------------________
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max H-Image Size [cm]: horiz.: 36 vert.: 29
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): Default color space is primary color space
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.633 redY: 0.340 greenX: 0.295 greenY: 0.599
(II) NV(0): blueX: 0.141 blueY: 0.096 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 359 x 287 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Serial No: 7R47736P015Y
(II) NV(0): Monitor name: DELL 1800FP
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) NV(0): end of DDC Monitor info
Last edited by prettycool; 11-20-2003 at 01:24 PM.
|