My new Acer Aspire 3(A315-41-R26W) shows error at boot, everything seems to work fine. Any tips? This errors persists from Debian stable->unstable.
Code:
$ lscpu | grep "Model name:"
Model name: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx
Code:
$ lspci -nn | grep VGA
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c4)
Code:
linux-image-4.17.0-1-amd64/unstable,now 4.17.3-1 amd64 [installed]
xserver-xorg-video-amdgpu/testing,now 18.0.1-1 amd64 [installed,upgradable to: 18.0.1-1+b1]
Code:
$ sudo dmesg --level=err
[sudo] password for :
[ 0.078836] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180313/psobject-221)
[ 0.078841] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078849] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078855] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078862] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078868] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078874] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078876] ACPI Error: Skipping While/If block (20180313/psloop-594)
[ 0.078882] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078886] ACPI Error: Cannot release Mutex [QMUX], not acquired (20180313/exmutex-359)
[ 0.078888] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078895] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-221)
[ 0.078897] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[ 0.078900] ACPI Error: Skipping Scope block (20180313/psloop-532)
[ 2.590387] tpm_crb MSFT0101:00: can't request region for resource [mem 0xaf7a5000-0xaf7a8fff]
[ 3.257352] [drm:amdgpu_pci_probe [amdgpu]] *ERROR* amdgpu requires firmware installed
[ 3.257395] See https://wiki.debian.org/Firmware for information about missing firmware
[ 3.260580] dell_smbios: Unable to run on non-Dell system
[ 3.369576] pcieport 0000:00:01.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000f(Receiver ID)
[ 3.369615] pcieport 0000:00:01.7: device [1022:15d3] error status/mask=000000c0/00006000
[ 3.369641] pcieport 0000:00:01.7: [ 6] Bad TLP
[ 3.369661] pcieport 0000:00:01.7: [ 7] Bad DLLP
[ 3.478423] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[ 3.478482] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 3.478550] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[ 3.478931] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/QCA9377/hw1.0/firmware-6.bin (-2)
[ 4.429804] pcieport 0000:00:01.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000f(Receiver ID)
[ 4.429870] pcieport 0000:00:01.7: device [1022:15d3] error status/mask=00000040/00006000
[ 4.429918] pcieport 0000:00:01.7: [ 6] Bad TLP
[ 2613.227391] pcieport 0000:00:01.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000f(Receiver ID)
[ 2613.227398] pcieport 0000:00:01.7: device [1022:15d3] error status/mask=00000040/00006000
[ 2613.227403] pcieport 0000:00:01.7: [ 6] Bad TLP
[ 2613.260710] pcieport 0000:00:01.7: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000f(Receiver ID)
[ 2613.260719] pcieport 0000:00:01.7: device [1022:15d3] error status/mask=00000040/00006000
[ 2613.260724] pcieport 0000:00:01.7: [ 6] Bad TLP
[ 6311.068071] wlp2s0: failed to remove key (0, f8:4f:57:bc:3d:70) from hardware (-110)
