I am using RED hat 9

I just installed 2 modems that I thought would work with linux. During startup kudzu detected both of them. When I go into X and look at my hardware I do not see them. Also I tried to run the internet configuration wizard and have it probe for the modems but no luck.

Why would kudzu detect and configure them both and then I can not see them in X?

I have run cat /proc/pci

Here is the output
[root@backupsvr root]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 196).
Prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 64).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6).
Master Capable. Latency=32.
I/O at 0xc000 [0xc00f].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. USB (rev 22).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xc400 [0xc41f].
Bus 0, device 7, function 3:
USB Controller: VIA Technologies, Inc. USB (#2) (rev 22).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xc800 [0xc81f].
Bus 0, device 7, function 4:
Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 64).
IRQ 11.
Bus 0, device 7, function 5:
Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 80).
IRQ 9.
I/O at 0xcc00 [0xccff].
I/O at 0xd000 [0xd003].
I/O at 0xd400 [0xd403].
Bus 0, device 10, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
IRQ 11.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xdc00 [0xdcff].
Non-prefetchable 32 bit memory at 0xde010000 [0xde0100ff].
Bus 0, device 15, function 0:
Serial controller: Rockwell International HCF 56k Data/Fax Modem (rev 1).
IRQ 9.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xde000000 [0xde00ffff].
Bus 0, device 20, function 0:
Communication controller: Lucent Microelectronics LT WinModem (rev 2).
IRQ 11.
Master Capable. Latency=32. Min Gnt=252.Max Lat=14.
Non-prefetchable 32 bit memory at 0xde011000 [0xde0110ff].
I/O at 0xe000 [0xe007].
I/O at 0xe400 [0xe4ff].
Bus 1, device 0, function 0:
VGA compatible controller: S3 Inc. Savage 4 (rev 2).
IRQ 10.
Master Capable. Latency=248. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xdd000000 [0xdd07ffff].
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
[root@backupsvr root]#