|
RH9 + TX2000 + 2.6 = Problems
Don't know where exactly to put this so here goes.
Ok I've searched and searched and searched and can't find anything that has helped. Compiled a 2.6 kernel and such and edited LILO and tried to boot with it. Didn't work. Did some more stuff and finally added some append info I found from murty's ataraid site. DIdn't do anything! I am at a lose here!
Problem:
Can't mount root fs, suggests passing a correct root= parameter. Says device can't be found.
System:
Asus A7N8X Deluxe
AMD Athlon XP 2200+
512MB Corsair XMS PC3200 TWINX (133 @ 2-2-2-4)
2x Maxtor 160GB 7200RPM 8MB cache UATA133 (RAID0 on PCI Promise FastTrak TX2000)
Pioneer 16X Slot-Load DVD-ROM
LiteOn 52/24/52 CD-RW
ATI Radeon 9700 Pro 128MB RAM
Onboard nForce Sound
Onboard 3COM 10/100 NIC
Drivers Used:
Promise ft.o SCSI emulation for TX2000
LILO.conf:
boot="/dev/sda"
lba32
prompt
timeout="50"
message=/boot/message
vga=normal
image="/boot/vmlinuz-2.4.20-8"
label="Linux"
root="/dev/sda8"
read-only
initrd="/boot/initrd-2.4.20-8.img"
other=/dev/sda1
label="WinXP"
image="/boot/vmlinuz-2.6.0-test1"
label="New-Linux"
read-only
root="/dev/ataraid/d0p8"
append="ide2=0xa000,0xa402,11 ide3=0xa800,0xac02,11 hdb=ide-scsi"
initrd="/boot/initrd-2.6.0-test1.img"
I can post my .config if necessary or certain parts of it.
|
