I am currently using SuSe 9.0. I have a sierrra wireless card 555. i have the drivers and it DOES work. But sometimes when trying to dial in using kinternet i get an error message. after about 10 attempts it does connect. is there somewhere i can fix this? below is the error code...and below that is the log on when it works. it is the dev/tty0 not the modem. thanks in advance

*error log below*

SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on drsuse.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.42
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: --> Sending: ATQ0
pppd[0]: ATQ0
pppd[0]: OK
pppd[0]: --> Re-Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> stdin not read/write and $MODEM not set
pppd[0]: Connect script failed
Status is: disconnected
pppd[0] died: Connect script failed (exit code 8)



*working log below*

SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on drsuse.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.42
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT#777
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT#777
pppd[0]: CONNECT
pppd[0]: --> Carrier detected. Waiting for prompt.



it does work, but i sometimes get error messages. thanks again