LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software > Linux - Games
User Name
Password
Linux - Games This forum is for all discussion relating to gaming in Linux.

Notices


Reply
  Search this Thread
Old 11-09-2004, 12:51 PM   #1
Arch.Fox
LQ Newbie
 
Registered: Nov 2004
Posts: 1

Rep: Reputation: 0
Cedega: CS 1.6 Slow -> timeout


Hi @ all!
I'm running Arch Linux with cvscedega and the cedega time demo. CS 1.6 is slow and if start a game, some time after the appearance of the message "precaching ressources", CS diplays an errormessage, because of a timeout.

WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config

;; If you think it is nescessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive C]
"Path" = "/home/fox/.cvscedega/c_drive"
"Type" = "hd"
"Label" = "Dos Drive"
"Filesystem" = "win95"

[Drive D]
"Path" = "${HOME}"
"Type" = "hd"
"Label" = "My Home"
"Filesystem" = "win95"

[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "tmp"
"Filesystem" = "win95"

[Drive G]
"Path" = "/"
"Type" = "hd"
"Label" = "root"
"Filesystem" = "win95"

[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system32\\"
"Temp" = "e:\\"
"Path" = "c:\\windows\\;c:\\windows\\system32\\"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
; Note: The WINESHELLLINK Environment variable will override this setting.
; (which is set in the winex startup script)
"ShellLinker" = "/usr/lib/cvscedega/bin/wineshelllink"
; Note: The WINEBROWSER Environment variable will override this setting.
; you may format the string by placing a %s where you want
; the URL to go, if its left off then the URL will be appended to the end.
; This option is used by the winelib app 'winebrowserlink'
"Browser" = "/usr/bin/mozilla-firefox %s"

# <wineconf>

[Version]
; This doesn't work in WineX, but its here for WineHQ compatability.
; can be (win95, win98, winme, nt351, nt40, win2k, winxp, win20, win30, win31)
"Windows" = "win98"
; dos version
;"DOS" = "6.22"

[DllDefaults]
"DefaultLoadOrder" = "native, builtin, so"

[DllOverrides]
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"d3d8" = "builtin, native"
"d3drm" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dinput8" = "builtin, native"
"dmusic" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"rpcrt4" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Number of colors to copy from the default palette
"CopyDefaultColors" = "0"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "800x600"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "N"
; Use XShm extension if present
"UseXShm" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "Y"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Use this to make your X server execute all commands
; sequentially rather than buffering commands. Will make
; everything really SLOW but can be nice for debugging.
;; "Synchronous" = "Y"
; This option controls the use of the X resize and rotate, XRandR, extension
; which provides fullscreen functionality in a manner similar to XVidMode.
; Note that if this option is enabled it will override UseXVidMode.
;; "UseXRandR" = "N"
; Enable the TransGaming HUD
;; "ShowFPS" = "Y"
; ShowFPS must be enabled for ShowMem to be enabled.
;; "ShowMem" = "Y"
; How much Video RAM does your graphic card have?
; If this option is not present, it will default set to 32MB.
"VideoRam" = "64"
; How much should WineX attempt to store into faster AGP memory
; Set the amount of video memory to be allocated for OpenGL vertex arrays.
; Normally the best choice is to leave it untouched or to set it to the
; half of your AGP aperture size -> dmesg | grep 'AGP aperture'
"AGPVertexRam" = "64"

[d3dgl]
"AnisotropicTextureFiltering" = "N"
"VertexShaders" = "Y"
"ClipSpaceFix" = "Y"

[fonts]
;Read documentation/fonts before adding aliases
"Resolution" = "96"
"Default" = "-adobe-times-"
;"Freetype" = "N"

[FontPatterns]
"Pattern0" = "-adobe-times*"
"Pattern1" = "-adobe-helvetica*"
"Pattern2" = "-adobe-courier*"
"Pattern3" = "-misc-fixed*"


;"0"="/usr/X11R6/lib/X11/fonts/TTF/"

[FontAlias]
;; Add font aliases here. On the left put the name of the windows font family
;; that you want to fake, on the right put the a similar font family that you
;; have installed. These will override the fontconfig and the WineX builtin fallbacks,
;; but may look better (if you choose them correctly).
;; Alias' may refer to other alias' that have been defined above them.
;; These alias' are the first that WineX loads.
;;
;; Serif Fonts
;"Times New Roman"="Times"
"MS Serif"="Arial"
;;
;; Sans Serif Fonts
;"Arial"="Helvetica"
"Helv"="Arial"
"MS Sans Serif"="Arial"
"System"="Arial"
"Tahoma"="Arial"
;;
;; Mono Space Fonts
;"Courier New"="Courier"
;"FixedSys"="Courier"

[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"

[parallelports]
"Lpt1" = "/dev/lp0"

[spooler]
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"

[spy]
"Exclude" = "WM_SIZE;WM_TIMER;"

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "n"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "n"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
"WineLook" = "Win98"

[Console]
"Drivers" = "xterm"
;"Drivers" = "tty"
"XtermProg" = "konsole"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"

; List of all directories directly contain .AFM files
[afmdirs]
;"1" = "/usr/share/ghostscript/fonts"
;"2" = "/usr/share/a2ps/afm"
;"3" = "/usr/share/enscript"
;"4" = "/usr/X11R6/lib/X11/fonts/Type1"

[Wineserver]
;; This option indicates if Cedega should accelerate
;; interprocess communication (AIC) between the client
;; and server.
"SHMWineserver" = "Y"

[WinMM]
"Drivers" = "winealsa.drv"
;"Drivers" = "wineoss.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

[wineoss]
"UseMMap" = "N"
"FullDuplex" = "N"
;; Specify a mapping for what digital audio devices to use
"dsp0" = "/dev/dsp0"
"mixer0" = "/dev/mixer0"

[winealsa]
;; This option allows you to configure Cedega to write directly
;; to memory on the sound card rather than having to use the
;; slower route through the kernel.
"UseMMap" = "Y"
;; These options allow you to specify what ALSA sound devices
;; Cedega should use. Appropriate selection of these options
;; can allow you to select a secondary sound card or a plugin.
;"pcm0" = "hw"
;"ctl0" = "hw"

;; sample AppDefaults entries
;[AppDefaults\\iexplore.exe\\DllOverrides]
;"shlwapi" = "native"
;"rpcrt4" = "native"
;"ole32" = "native"
;"shdocvw" = "native"
;"wininet" = "native"
;"shfolder" = "native"
;"shell32" = "native"
;"shell" = "native"
;"comctl32" = "native"
;
;[AppDefaults\\setup.exe\\x11drv]
;"Desktop" = "800x600"

;; Battle Field 1942 settings
[AppDefaults\\bf1942.exe\\d3dgl]
"ClipSpaceFix" = "N"

;; SimCity 4 settings
[AppDefaults\\SimCity 4.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\SimCity 4.exe\\transgaming]
"cmdlineadd" = "-d:software"

;; Civ 3
[AppDefaults\\Civilization3.exe\\Version]
"Windows" = "win2k"

;; Call of Duty
[AppDefaults\\CoDSP.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\CoDMP.exe\\Version]
"Windows" = "win2k"

;; City of Heros
[AppDefaults\\CityOfHeroes.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\CityOfHeroes.exe\\cursor]
"CursorAlphaAlwaysOn" = "Y"
[AppDefaults\\CohUpdater.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\CohUpdater.exe\\cursor]
"CursorAlphaAlwaysOn" = "Y"

;; EverQuest
[AppDefaults\\eqgame.exe\\d3dgl]
"ClipSpaceFix" = "N"
"ForceMaxVertexBlendMatrices" = "2"
[AppDefaults\\testeqgame.exe\\d3dgl]
"ClipSpaceFix" = "N"
"ForceMaxVertexBlendMatrices" = "2"

;; Need for Speed Underground
[AppDefaults\\Speed.exe\\d3dgl]
"PixelShaders" = "N"

;; Max Payne 2
[AppDefaults\\MaxPayne2.exe\\d3dgl]
"PixelShaders" = "N"

;; Far Cry
[AppDefaults\\farcry.exe\\x11drv]
"NV_VAR" = "N"

;; Steam
[AppDefaults\\Steam.exe\\version]
"Windows" = "win2k"

# </wineconf>
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Suse 9.2 & SATA - Slow, Slow, Slow jess1975 SUSE / openSUSE 6 01-28-2007 12:17 PM
Painkiller running slow on Cedega 4.4.3-1 / Debian 2.6.14.2 Gnome Grimmi- Linux - Games 1 12-01-2005 05:25 AM
Cedega Crashes / Best Distro for Cedega jawaking00 Linux - Games 1 11-11-2005 09:40 AM
New Fedora Internet connection slow slow slow matrim Fedora 9 07-29-2005 01:39 PM
wget timeout very slow Basta Linux - General 1 04-21-2005 08:02 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software > Linux - Games

All times are GMT -5. The time now is 03:27 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration