Hi,

Without fonts it will not work (which seems kinda obvious ).

You don't tell which order you installed (or tried to install) the font packages. Some need to be done before others. I do believe that encodings and font-util need to be done first, then the others.

If that doesn't help:

- Is the error you gave ('XFONT not installed') the actual error?
- Which font package showed this error?

PS: I do assume you are installing Xorg 7.1, not Xorg 6.9.

Hope this helps.

yup i am installing Xorg6.9 cause i think it's more simple to install..

i don't know what font package i used, i just install Xorg6.9 and it's componet (but not Xorg Protocol header, Xor library and else because i have error when try installed Xorg library ..
'XFONT are not met' (when compile checking pkg-config)

After that i test my X windows and work and i can use xterm.. And then i want to use XFce for desktop environment, my dekstop XFce is work and appear dekstop Xfce, but when i click Xfce4 panel have found error :
** (xfce-mcs-manager-28900) : CRITICAL ** : find master : assertion 'mixer_handle != -1! failed

No fonts found ;

what should i do?? How to config or install fontconfig?? specified my PKG_CONFIG_PATH environment variable??

Hi,

So my assumption was incorrect, you installed Xorg 6.9 and _not_ Xorg 7.1.

It's not clear how you installed 6.9, especially this part "Xorg6.9 and it's components (but not Xorg Protocol header, Xorg library and else because i have error when try installed Xorg library" makes me wonder if you installed it the way it should.

After installing Xog 6.9 you have to skip a few chapters and continue with (parts of) X Window System Components.
All that is in between (XFree86-4.6.0 and all the chapters related to Xorg 7.1) you should not do.

The following is from Xorg 6.9: Did you do this step, seems like this could also be a reason for the problems you are having.

Although I'm not 100% sure, I do believe that the xfce errors you see are related to the font problems in X (The "No fonts found" part being a bit of a hint ).

BTW: Are there any strange entries in your /var/log/Xorg.0.log file?

No to much to go on,

oh Xorg 6.9 is not needed to install Xorg protocol header, Xorg libraries and Xorg else, why??

But i don't have X11R6 in my file system, i just have X11 in /usr/bin/X11 when i run command
$whereis X11

i don't know whats wrong in my configuration about fontconfig because the error display cannot found any font, you should edit your fonts.conf in /etc/fonts
what we should edit that after installed Xorg, not it's installed by default??

Thanx..

Hi,

LFS gives you the possibility to install Xorg 6.9 or XFree86 or Xorg 7.1. You should choose one and stick to that one and only do those parts in the LFS book that concern the chosen X environment.

It looks like you have installed a mix of Xorg 6.9 and Xorg 7.1. Although I've never tried this myself, I do believe that the end result isn't what you were aiming for (a solid X environment).

I'm not sure if you can remove the parts of Xorg 6/7 you have already installed and redo the install of the X environment of your choice. If not you could try to reinstall the preferred X environment and hope that nothing still points to the other (old/incorrect) X env after the install is done.

Hope this helps.

Sorry, it's my file /var/log/Xorg.0

(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "RIVA TNT2 Model 64"
(==) NV(0): Depth 16, (==) framebuffer bpp 16
(==) NV(0): RGB weight 565
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xF2000000
(--) NV(0): MMIO registers at 0xFD000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM Model: 3b1b Serial#: 50397
(II) NV(0): Year: 2002 Week: 23
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NV(0): Signal levels configurable
(II) NV(0): Sync: Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) NV(0): Gamma: 2.61
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing not preferred mode in violation of standard!(II) NV(0): redX: 0.632 redY: 0.335 greenX: 0.295 greenY: 0.593
(II) NV(0): blueX: 0.143 blueY: 0.066 whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) NV(0): #1: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) NV(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) NV(0): #3: hsize: 720 vsize 405 refresh: 70 vid: 51771
(II) NV(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #5: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) NV(0): #6: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 78.8 MHz Image Size: 270 x 200 mm
(II) NV(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 v_border: 0
(II) NV(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 61 kHz, PixClock max 80 MHz
(II) NV(0): Monitor name: StudioWorks 5
(II) NV(0): Monitor name: 63N
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor0: Using hsync range of 30.00-61.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(WW) (1024x768,Monitor0) mode clock 94.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(WW) (1152x864,Monitor0) mode clock 108MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(WW) (1280x960,Monitor0) mode clock 108MHz exceeds DDC maximum 80MHz
(WW) (1280x960,Monitor0) mode clock 148.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(WW) (1280x1024,Monitor0) mode clock 108MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(WW) (1280x1024,Monitor0) mode clock 135MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(WW) (1280x1024,Monitor0) mode clock 157.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(WW) (800x600,Monitor0) mode clock 81MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(WW) (800x600,Monitor0) mode clock 87.75MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 189MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(WW) (800x600,Monitor0) mode clock 94.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 202.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(WW) (800x600,Monitor0) mode clock 101.25MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 229.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(WW) (800x600,Monitor0) mode clock 114.75MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(WW) (1792x1344,Monitor0) mode clock 204.8MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(WW) (896x672,Monitor0) mode clock 102.4MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(WW) (1792x1344,Monitor0) mode clock 261MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(WW) (896x672,Monitor0) mode clock 130.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(WW) (1856x1392,Monitor0) mode clock 218.3MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(WW) (928x696,Monitor0) mode clock 109.15MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(WW) (1856x1392,Monitor0) mode clock 288MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(WW) (928x696,Monitor0) mode clock 144MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(WW) (1920x1440,Monitor0) mode clock 234MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(WW) (960x720,Monitor0) mode clock 117MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(WW) (1920x1440,Monitor0) mode clock 297MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(WW) (960x720,Monitor0) mode clock 148.5MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(WW) (1400x1050,Monitor0) mode clock 122MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(WW) (1400x1050,Monitor0) mode clock 155.8MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(WW) (1600x1024,Monitor0) mode clock 106.91MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1600x1024" (hsync out of range)
(II) NV(0): Not using default mode "800x512" (hsync out of range)
(WW) (1920x1440,Monitor0) mode clock 341.35MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(WW) (960x720,Monitor0) mode clock 170.675MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(WW) (2048x1536,Monitor0) mode clock 266.95MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(WW) (1024x768,Monitor0) mode clock 133.475MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(WW) (2048x1536,Monitor0) mode clock 340.48MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(WW) (1024x768,Monitor0) mode clock 170.24MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Monitor0) mode clock 194.02MHz exceeds DDC maximum 80MHz
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(--) NV(0): Virtual size is 1280x960 (pitch 1280)
(**) NV(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) NV(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) NV(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) NV(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) NV(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) NV(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) NV(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) NV(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) NV(0): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) NV(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) NV(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) NV(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) NV(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) NV(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(--) NV(0): Display dimensions: (280, 210) mm
(--) NV(0): DPI set to (116, 116)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B]
[1] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[9] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B)
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[18] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[19] -1 0 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[20] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xf2000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/lib/X11/fonts/CID/, removing from list!
FreeFontPath: FPE "/usr/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.

any have wrong about mixing Xorg6 and 7?? And how about to uninstalled Xorg?

But...Finally i have found my mistake about my configuration in xc/programs/luit/parser.h which i have installed my Xorg in /usr not /usr/X11R6 so the link about fonts is wrong which should "ln -svn /usr/lib/X11/fonts/TTF /usr/share/fonts/X11-TTF" not "/usr/X11R6/lib/X11/fonts/TTF /usr/share/fonts/X11-TTF"
Now, i can used my XFce.. Thanx guys..


Now, i want to ask again , how about to insert my file xinitrc to load when i login my LFS because now i could only login XFce desktop by run command "startx" in command line.. i have edit file /etc/inittab to run initdefault to 5 and i can use xdm too but when i insert my username and password, and then only running Xorg standard (with Xterm) but XFce desktop is not running, so i must reboot and stop to run initdefault5 and edit /etc/inittab to go back to initdefault3 and i run command startx to login XFce..


Trims..

HI...how about to insert my file xinitrc to load when i login my LFS because now i could only login XFce desktop by run command "startx" in command line.. i have edit file /etc/inittab to run initdefault to 5 and i can use xdm too but when i insert my username and password, and then only running Xorg standard (with Xterm) but XFce desktop is not running, so i must reboot and stop to run initdefault5 and edit /etc/inittab to go back to initdefault3 and i run command startx to login XFce..


Trims..

Hi,

I do believe that xdm looks for a local .xsession file to determine which window manager it has to start. If it doesn't find one it falls back to the default WM.

Create a ~/.xsession file that has startxfce4 in it.

Hope this helps.

hi.. i have created a ~/.xsession file, but i can't login to my desktop XFce now.. What's wrong again?? Please any help..

Trims..

Hi,

Is there no window to put a name/passwd or is the name/passwd combo not accepted?
The latter could point to a missing xdm entry in /etc/pam.d (you need to copy login to xdm, as stated in the book).

On the other hand: You still have a mixed X (6.9/7.1) environment, which could be the cause.

Hope this helps.

yup..

now, when i created ~/.xsession, a window to put a name/password can display but when i insert that it's back again xdm (a window login again),

but, when i not yet created ~/.xsession, a window login is displayed but only wm standard is displayed on my desktop although i'm not installed XFce.. Any other file could make this repaired to login automatically to desktop environment after i put my username and password in xdm??

on the other hand, when i click a right click and click "exit", and then the display right click is not appeared again.. And why the choosen of reboot, shutdown is not there in "exit"??

Trimss...

hi, anyone could help my problem above.. Please help me..

Hi,

I really can't understand what you are saying in post #26.

Are you saying that after entering your username/password, nothing happens and you are presented with the same login window?

I thought you did install xfce???? If you haven't installed xfce yet, you will be presented with the default that belongs to xdm.
You do need the .xsession file (see post #23) if you want to start xfce from xdm.

These I don't understand at all.

sorry, my english language is so messy.. Sorry if you can't understand clearly.. Sorry guys..

Hm.. ok i'll try explaining again my problem now.. I can't find "reboot, shutdown" when i click exit, why?? Any other setting which can appear this icon(reboot,shutdown0 when i click "exit" from my desktop environment???

Hm.. and then how about to make live-cd to my lfs?

trims...