LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware > Linux - Embedded & Single-board computer
User Name
Password
Linux - Embedded & Single-board computer This forum is for the discussion of Linux on both embedded devices and single-board computers (such as the Raspberry Pi, BeagleBoard and PandaBoard). Discussions involving Arduino, plug computers and other micro-controller like devices are also welcome.

Notices

Reply
 
Search this Thread
Old 10-22-2010, 02:39 PM   #1
gfaurie
LQ Newbie
 
Registered: Oct 2010
Posts: 3

Rep: Reputation: 0
ask your advise on my future development


Hi and thank by advance for your help,

I have a devkit8000 board with a camera, a touch screen 7 inch and omap 3530. I have a project to develop : to display on screen the camera and to record a movie in a USB file. The movie will be displayed according to a command by touch screen. A text will be added a the end on the movie.

I have Angstrom linux on the target. My fisrt idea was to use OpenCv but i have some problems to use it because it seems that i have to use GTK but with all dependencies (ZLIB, GLIB, ...) i have some errors. I have to compile all these for arm. I think that i could solve with a lot of job.

But my question is there an easier way to develop my project. Perhaps with another distribution or another soft than opencv.

Thanks
 
Old 10-23-2010, 05:07 PM   #2
Mara
Moderator
 
Registered: Feb 2002
Location: Grenoble
Distribution: Debian
Posts: 9,535

Rep: Reputation: 148Reputation: 148
Generally it depends on the distribution you have on your board. Check it out, because the missing things may be in some external package repository and it's enough to just install them...
 
Old 10-24-2010, 12:58 PM   #3
gfaurie
LQ Newbie
 
Registered: Oct 2010
Posts: 3

Original Poster
Rep: Reputation: 0
First of all tank you for your answer. In fact i have an Angstrom Beagle board on my target. But there is not opencv neither glib neither zlib. My question is, if i boot from sd card can use wget and paquets will be autoatically loaded as ARM format ?
 
Old 10-25-2010, 03:05 PM   #4
Mara
Moderator
 
Registered: Feb 2002
Location: Grenoble
Distribution: Debian
Posts: 9,535

Rep: Reputation: 148Reputation: 148
If you find the packets for your board, but it seems there's no package repo for this distribution. It means you'll need to compile on your own...
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Future of Linux, Future of BSD ? tarballed Linux - General 28 01-01-2012 04:04 PM
Microsoft at a Crossroads: Future Trend-Setter or Future Pariah? acrossad General 6 02-27-2009 01:44 PM
LXer: Alan Cox on open-source development vs. proprietary development LXer Syndicated Linux News 0 10-25-2007 04:21 PM
Firebird Future Development mariuz Linux - News 3 03-05-2006 04:31 PM
The future of web development, what to study? brynjarh Programming 8 12-01-2005 12:27 PM


All times are GMT -5. The time now is 02:56 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration