LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian
User Name
Password
Debian This forum is for the discussion of Debian Linux.

Notices

Reply
 
Search this Thread
Old 07-22-2006, 08:24 PM   #1
ErrorBound
Member
 
Registered: Apr 2006
Posts: 280

Rep: Reputation: 31
X works great in Ubuntu, won't start in Debian


I've got Kubuntu 6.06 installed on one partition and I'm doing an install of Debian Sarge on another. KDE and X of course work great under Kubuntu, and they were automatically set up for me during the install. In sarge I've installed the packages x-window-system-core and kde. However I cannot get X to start for the life of me using startx. I always get the error
Code:
(EE) No devices detected.

Fatal server error:
no screens found
From what I understand, this means that /etc/X11/XF86Config-4 doesn't contain the correct driver for my card. (an integrated intel i810 somethingorother) However whether I select the i810 or vga driver in the configurator (dpkg-reconfigure xserver-xfree86), X will not start and I always get the same error message. I've tried renaming the xorg.conf file that Kubuntu created as XF86Config-4 and using that, but I always get the same thing. Perhaps someone can help? I was kind of reluctant to post this because I know this is rather common sort of thing but whatever I try I can't do it.

Thanks in advance, here are some files which may be useful:

/etc/X11/XF86Config-4
Code:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"i810"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	28-50
	VertRefresh	43-75
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection
From Kubuntu: /etc/X11/xorg.conf
Code:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller"
	Driver		"i810"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
	Identifier	"L1751S"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller"
	Monitor		"L1751S"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

/var/log/XFree86.0.log is in the next post because this one is too long
 
Old 07-22-2006, 08:31 PM   #2
ErrorBound
Member
 
Registered: Apr 2006
Posts: 280

Original Poster
Rep: Reputation: 31
/var/log/XFree86.0.log
Code:
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 fjp@localhost.localdomain)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF] 
Build Date: 02 September 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.4.26-om1.try13 (root@dvorak) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Sat Jul 22 19:24:04 EDT 2006 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jul 23 00:01:34 2006
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80064008, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2580 card 8086,4c58 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2581 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 8086,2582 card 8086,4c58 rev 04 class 03,00,00 hdr 00
(II) PCI: 00:1b:0: chip 8086,2668 card 8086,e201 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2666 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 8086,4c58 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 8086,4c58 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 8086,4c58 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 8086,4c58 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 8086,4c58 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2640 card 8086,4c58 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 8086,4c58 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2651 card 8086,4c58 rev 03 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 8086,4c58 rev 03 class 0c,05,00 hdr 00
(II) PCI: 06:08:0: chip 8086,1064 card 8086,305d rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xffa00000 - 0xffafffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xcff00000 - 0xcfffffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:0), (0,5,5), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
	[0] -1	0	0xff600000 - 0xff6fffff (0x100000) MX[B]
(II) Bus 5 prefetchable memory range:
	[0] -1	0	0xcfb00000 - 0xcfbfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 4 non-prefetchable memory range:
	[0] -1	0	0xff700000 - 0xff7fffff (0x100000) MX[B]
(II) Bus 4 prefetchable memory range:
	[0] -1	0	0xcfc00000 - 0xcfcfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:2), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xff800000 - 0xff8fffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
	[0] -1	0	0xcfd00000 - 0xcfdfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:3), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xff900000 - 0xff9fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xcfe00000 - 0xcfefffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,6), BCTRL: 0x0206 (VGA_EN is cleared)
(II) Bus 6 I/O range:
	[0] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[1] -1	0	0x0000b400 - 0x0000b4ff (0x100) IX[B]
	[2] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B]
	[3] -1	0	0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
	[0] -1	0	0xff500000 - 0xff5fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
	[0] -1	0	0xcfa00000 - 0xcfafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corp. unknown chipset (0x2582) rev 4, Mem @ 0xff480000/19, 0xd0000000/28, 0xff440000/18, I/O @ 0xec00/3
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xff500000 - 0xff500fff (0x1000) MX[B]
	[1] -1	0	0xff43bc00 - 0xff43bfff (0x400) MX[B]
	[2] -1	0	0xff43c000 - 0xff43ffff (0x4000) MX[B]
	[3] -1	0	0xff440000 - 0xff47ffff (0x40000) MX[B](B)
	[4] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[5] -1	0	0xff480000 - 0xff4fffff (0x80000) MX[B](B)
	[6] -1	0	0x0000bc00 - 0x0000bc3f (0x40) IX[B]
	[7] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[8] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[9] -1	0	0x0000dc00 - 0x0000dc03 (0x4) IX[B]
	[10] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[11] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[12] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[13] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[14] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[15] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[16] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[B]
	[18] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xff500000 - 0xff500fff (0x1000) MX[B]
	[1] -1	0	0xff43bc00 - 0xff43bfff (0x400) MX[B]
	[2] -1	0	0xff43c000 - 0xff43ffff (0x4000) MX[B]
	[3] -1	0	0xff440000 - 0xff47ffff (0x40000) MX[B](B)
	[4] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[5] -1	0	0xff480000 - 0xff4fffff (0x80000) MX[B](B)
	[6] -1	0	0x0000bc00 - 0x0000bc3f (0x40) IX[B]
	[7] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[8] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[9] -1	0	0x0000dc00 - 0x0000dc03 (0x4) IX[B]
	[10] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[11] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[12] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[13] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[14] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[15] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[16] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[B]
	[18] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff500000 - 0xff500fff (0x1000) MX[B]
	[6] -1	0	0xff43bc00 - 0xff43bfff (0x400) MX[B]
	[7] -1	0	0xff43c000 - 0xff43ffff (0x4000) MX[B]
	[8] -1	0	0xff440000 - 0xff47ffff (0x40000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[10] -1	0	0xff480000 - 0xff4fffff (0x80000) MX[B](B)
	[11] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[12] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[13] -1	0	0x0000bc00 - 0x0000bc3f (0x40) IX[B]
	[14] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[B]
	[15] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[16] -1	0	0x0000dc00 - 0x0000dc03 (0x4) IX[B]
	[17] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[18] -1	0	0x0000e400 - 0x0000e403 (0x4) IX[B]
	[19] -1	0	0x0000e800 - 0x0000e807 (0x8) IX[B]
	[20] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[21] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[22] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[23] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[24] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[B]
	[25] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.3.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
	i810e, i815, i830M, 845G, 852GM/855GM, 865G
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
Thanks again,
 
Old 07-22-2006, 08:47 PM   #3
rickh
Senior Member
 
Registered: May 2004
Location: Albuquerque, NM USA
Distribution: Debian-Lenny/Sid 32/64 Desktop: Generic AMD64-EVGA 680i Laptop: Generic Intel SIS-AC97
Posts: 4,250

Rep: Reputation: 60
What does lsmod say about your i810? You are generally better of to install etch than Sarge if your hardware is at all new. Since Kubuntu is based on etch, I think the odds of etch working better are good.

Edit: fixed command ... said lspci when I meant lsmod

Last edited by rickh; 07-22-2006 at 08:57 PM.
 
Old 07-22-2006, 09:04 PM   #4
ErrorBound
Member
 
Registered: Apr 2006
Posts: 280

Original Poster
Rep: Reputation: 31
lsmod
Code:
Module       Size   Used by    Not tainted
e100        48424     1
That's all it says.

I'll probably add the etch repositories to my sources.list later, but for now I'm using sarge to build a custom kernel for use with openMosix.

(This is on an openMosix kernel that I built this morning....perhaps I wasn't generous enough with including drivers? If I compiled certain things as modules in the kernel, will they show up in lsmod?)

Edit: startx doesn't work with the stock 2.6.8 kernel which came with debian either. Maybe it isn't my kernel's fault?

Last edited by ErrorBound; 07-22-2006 at 10:43 PM.
 
Old 07-22-2006, 11:09 PM   #5
rickh
Senior Member
 
Registered: May 2004
Location: Albuquerque, NM USA
Distribution: Debian-Lenny/Sid 32/64 Desktop: Generic AMD64-EVGA 680i Laptop: Generic Intel SIS-AC97
Posts: 4,250

Rep: Reputation: 60
I don't know if e100 is a video module or not, but by your symptoms, I doubt it. If you're going to build your own kernel, you're beyond my ability to make reasonable suggestions.
 
Old 07-22-2006, 11:22 PM   #6
JackieBrown
Member
 
Registered: Dec 2004
Location: San Antonio, TX
Distribution: Debian-AMD64 Sid
Posts: 481

Rep: Reputation: 31
you could try spefify the bus id like ubuntu did

BusID "PCI:0:2:0"
 
Old 07-22-2006, 11:54 PM   #7
ErrorBound
Member
 
Registered: Apr 2006
Posts: 280

Original Poster
Rep: Reputation: 31
I just tried changing the BusID but that didn't work either. Do we know if the kernel has to be compiled with DRI support for X to work? I've been leaving it out because it always causes it to fail the compile.

Quote:
Originally Posted by rickh
Since Kubuntu is based on etch, I think the odds of etch working better are good.
Pretty sure Kubuntu is based on sid. Maybe I'll give this a try anyway...

Edit: lspci recognizes it
Code:
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04)
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1c.2 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
0000:00:1c.3 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:06:08.0 Ethernet controller: Intel Corp.: Unknown device 1064 (rev 01)

Last edited by ErrorBound; 07-23-2006 at 12:01 AM.
 
Old 07-23-2006, 12:56 AM   #8
ErrorBound
Member
 
Registered: Apr 2006
Posts: 280

Original Poster
Rep: Reputation: 31
Well, I changed my sources.list to include the testing sources and did an apt-get dist-upgrade. Now I can do startx and KDE actually starts. Maybe the old sarge didn't like the new hardware, and I am still running my old 2.4.26 mosix kernel. Thanks to those who helped.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
is Ubuntu better than Debian? what's so great about Ubuntu anyway? hisnumber666isback Linux - Distributions 20 05-30-2006 06:19 AM
Works great, but not from /etc/rc.d/rc.local :( Barca Programming 2 01-22-2005 04:14 PM
FA311 works great DarkBeethoven Linux - Networking 1 01-18-2002 08:41 PM


All times are GMT -5. The time now is 04:52 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration