Hi,
I install Debian on laptop by CD source, when uncompress kernel image and bootloader,
it can not detect and mount CD-ROM
It can still end up in main menu
Choose language
Select a keyboard layout
Detect and mount CD-ROM
Load installer components from CD
.......
.......
Code:
Jul 16 15:21:50 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 16 15:21:50 kernel: ALI15X3: IDE controller at PCI slot 0000:00:10.0
Jul 16 15:21:50 kernel: ACPI: Unable to derive IRQ for device 0000:00:10.0
Jul 16 15:21:50 kernel: ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 15
Jul 16 15:21:50 kernel: PCI: setting IRQ 15 as level-triggered
Jul 16 15:21:50 kernel: ALI15X3: chipset revision 195
Jul 16 15:21:50 kernel: ALI15X3: not 100% native mode: will probe irqs later
Jul 16 15:21:50 kernel: x7050-0x7057, BIOS settings: hda:DMA, hdb:pio
Jul 16 15:21:50 kernel: ide1: BM-DMA at 0x7058-0x705f, BIOS settings: hdc:DMA, hdd:pio
Jul 16 15:21:50 kernel: Probing IDE interface ide0...
Jul 16 15:21:50 kernel: usbcore: registered new driver usbfs
Jul 16 15:21:50 kernel: usbcore: registered new driver hub
Jul 16 15:21:50 kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jul 16 15:21:50 kernel: hda: ATA DISK drive
Jul 16 15:21:50 kernel: parport: PnPBIOS parport detected.
Jul 16 15:21:50 kernel: parport0: PC-style at 0x3bc, irq 5 [PCSPP,TRISTATE]
Jul 16 15:21:50 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 16 15:21:50 kernel: Probing IDE interface ide1...
Jul 16 15:21:50 kernel: hdc: CD-224E, ATAPI CD/DVD-ROM drive
Jul 16 15:21:50 kernel: irq 15: nobody cared (try booting with the "irqpoll" option)
Jul 16 15:21:50 kernel: hdc: lost interrupt
Jul 16 15:21:50 kernel: ide-cd: cmd 0x5a timed out
Jul 16 15:21:50 kernel: hdc: lost interrupt
Jul 16 15:21:50 kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Jul 16 15:21:50 kernel: Uniform CD-ROM driver Revision: 3.20
Jul 16 15:21:50 kernel: hdc: lost interrupt
if I enter kernel parameters like irq would help? what kernel parameters are in above error log??
Thank you for help!
