problem with gpg signature

Hi all

I was recently out of my countri for almost 3 month during this time I can't upgrade my slackware current !

now i try to give

slackpkg update

but i got this error :

==============================================================================
  WARNING! One or more errors occurred while slackpkg was running
------------------------------------------------------------------------------
Repository 'slackpkgplus' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

Repository 'restricted_current' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

Repository 'alienbob_current' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

Repository 'ktown' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

Repository 'slacky' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

Repository 'multilib' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

Repository 'msb' FAILS the CHECKSUMS.md5 signature check.
Try to run 'slackpkg update gpg'

I try to give slackpkg update gpg but the problem doesn't solve ! i still continue to get this failure in the update !

Have you checked to make sure your mirror is still active and up-to-date?

honestly no ! what I have to do for see if is up to date ?

Check /etc/slackpkg/mirrors for the one that is uncommented and then visit that mirror with your browser and see if the ChangeLog.txt is updated. If not, you could try and switch to a different server that is up-to-date. Just rerun slackpkg update gpg to ensure it is updated properly.

yes it is update yesterday!

what can I try to do ?

Looking over the list again, I realized these are the mirrors used for slackpkg+. Can you provide the contents of your /etc/slackpkg/slackpkgplus.conf file?

sure ..

# Configuration for slackpkg+. See /usr/doc/slackpkg+-*/README for more details
# Please read manpage: "man slackpkgplus.conf" and documentation /usr/doc/slackpkg+-*/README

# Enable (on) / Disable (off) slackpkg+
SLACKPKGPLUS=on

# set to '0' to never show the download progress bar
# set to '1' to show the bar only in download packages (default)
# set to '2' to always show the download bar
# set to '3' for a debug mode
VERBOSE=1

# By default slackpkg+ deny to install 32bit packages.
#
# Set this flag to 'on' allow slackpkg+ to install 32bit packages on a 64bit slackware 
# installation (possibly unsafe). Please, do not install both 32 and 64bit of the same 
# package to avoid problems, and NEVER upgrade existant 64bit packages with relative 32bit package.
# Do not forget to install the multilibs.
ALLOW32BIT=off

# Enable (1) / Disable (0) the official slackpkg blacklist. May be useful to temporarily skip
# the slackware blacklist. You can also override it from command line:
# 'USEBL=0 slackpkg upgrade-all'
USEBL=1

# Add custom option to 'wget'.
# You can solve the repository indisponibility issue by set a timeout here
WGETOPTS="--timeout=20 --tries=2"

# If you want replace wget with another downloader search DOWNLOADCMD in documentation
# at /usr/doc/slackpkg+-*/README
#DOWNLOADCMD="wget -O"

# Defines if the changelog of any 3rd party repository must be searched in parent URL when not found in base URL.
# Can be set to "on" or "off" (default)
SEARCH_CLOG_INPARENT=on

# Use the cache for metadata files (CHECKSUMS.md5,...). Enable it (on) to speedup the slackpkg update
# process by downloading just new files (see README). Disabled by default (off)
CACHEUPDATE=off

# You can download-only by setting DOWNLOADONLY to 'on'. You may (you should) also use it in commandline
# for example: "DOWNLOADONLY=on slackpkg upgrade-all". Useful for large upgrades.
#DOWNLOADONLY=off

# Enable (on) / Disable (off) notification events (see notifymsg.conf)
#ENABLENOTIFY=off

# Enable (on) / Disable (off) the greylist feature. See /etc/slackpkg/greylist
GREYLIST=on

# Defines if commands 'search' and 'file-search' are case-sensitive (on) or not (off). Default to "on"
SENSITIVE_SEARCH=on

# Defines if command 'file-search' does search Wole Word (on) of accept partial words (off). Note that
# you may obtains many many results searching a short partial word
WW_FILE_SEARCH=on

# Select the show order in dialogbox. Available "package" "repository" "tag" "path" "arch"
SHOWORDER=package

# Allow to show more details of the package in slackpkg info <package>. Accept "none", "basic", "filelist"
DETAILED_INFO=none

# Enable (on) / Disable (off) a Strict GPG Check. A repository should contains packages signed
# with the only original GPG-KEY. In some custom repository may be wanted to mix heterogeneous
# packages; to use that repository set Strict GPG Check to off. P.S: a repository can
# contain just ONE gpg-key; you may manually import the other.
STRICTGPG=on

# If two or more repositories contains some same packages, you can specify
# from which repository you prefer to search it.
# The syntax is "<repository_name>:<package_name>"
# Accepts regular expressions. To give priority to an entire repository use "<repository_name>"

# Examples:
#PKGS_PRIORITY=( restricted:vlc )
# OR
#PKGS_PRIORITY=( myrepo )
# 
# if you have two reporitories to give priority you must set both in the same line
#PKGS_PRIORITY=( myrepo restricted:vlc )
#
# if you want to install 'ktown' repository you must set it here
#PKGS_PRIORITY=( ktown )
# and DO NOT MISS to read special instruction on /usr/doc/slackpkg+-*/repositories.txt
#
# If you want a multilib system, uncomment the multilib repository and set:
#PKGS_PRIORITY=( multilib )
#
# (Use /usr/doc/slackpkg+-*/setupmultilib.sh to setup a multilib configuration)
#
# For both multilib and ktown set
PKGS_PRIORITY=( ktown:* multilib:* alienbob_current:* restricted_current:*)

# Otherwise you can try to upgrade a package from a repository that contains a package with the
# same tag of the already installed package. Tipically that means to upgrade a package from the
# same author of the already installed package.
# Note that this method may not works properly where two repositories contains a package with the
# same tag.
# Set TAG_PRIORITY to 'on' to enable this function
TAG_PRIORITY=on

# List repositories you want to use (defined below)
# remember to launch 'slackpkg update' if you modify that row.
REPOPLUS=( slackpkgplus restricted_current alienbob_current ktown slacky multilib msb ktown)
#REPOPLUS=( slackpkgplus )


# Define mirrors (uncomment one or more mirror; remember to add it to REPOPLUS)
# GPG Note: after adding/renaming a repository, you must to run 'slackpkg update gpg'
#           some repositories as salixos, have a partial GPG support;
#           for that repositories you may need to run slackpkg with 'slackpkg -checkgpg=off ...'

# Slackware 14.2 - x86_64
#MIRRORPLUS['multilib']=http://bear.alienbase.nl/mirrors/people/alien/multilib/14.2/
#MIRRORPLUS['alienbob']=http://bear.alienbase.nl/mirrors/people/alien/sbrepos/14.2/x86_64/
#MIRRORPLUS['restricted']=http://bear.alienbase.nl/mirrors/people/alien/restricted_sbrepos/14.2/x86_64/
#MIRRORPLUS['slacky']=http://repository.slacky.eu/slackware64-14.2/

# use this to keep the slackpkg+ package updated to the latest stable release
#MIRRORPLUS['slackpkgplus']=http://slakfinder.org/slackpkg+/

# use the development branch to use the mainline version and help develop by reporting bugs.
#MIRRORPLUS['slackpkgplus']=http://slakfinder.org/slackpkg+dev/


# Slackware current - x86_64
#MIRRORPLUS['multilib']=http://bear.alienbase.nl/mirrors/people/alien/multilib/current/

# Local repository:
#MIRRORPLUS['alienbob']=file://repositories/alien/sbrepos/14.2/x86/
#
# Local packages (you do not need metadata nor 'slackpkg update' command):
#MIRRORPLUS['myrepo']=dir://repositories/mypackages/


#
# Supported Repositories (see /usr/doc/slackpkg+-* for details and notes):
#

MIRRORPLUS['slackpkgplus']=http://slakfinder.org/slackpkg+1.7/
MIRRORPLUS['multilib']=http://bear.alienbase.nl/mirrors/people/alien/multilib/current/
MIRRORPLUS['alienbob_current']=http://bear.alienbase.nl/mirrors/people/alien/sbrepos/current/x86_64/
MIRRORPLUS['ktown']=http://bear.alienbase.nl/mirrors/alien-kde/current/5/x86_64/
MIRRORPLUS['restricted_current']=http://bear.alienbase.nl/mirrors/people/alien/restricted_sbrepos/current/x86_64/
MIRRORPLUS['slacky']=http://repository.slacky.eu/slackware64-14.2/
#mleddesktop:   http://slackware.uk/microlinux/desktop-{14.1,14.2}-{32,64}bit/
#mledextras:    http://slackware.uk/microlinux/extras-{14.1,14.2}-{32,64}bit/
#mles:          http://slackware.uk/microlinux/server-{14.0,14.1,14.2}-{32,64}bit/
MIRRORPLUS['msb']=http://slackware.uk/msb/current/latest/x86_64/
#csb:           http://slackware.uk/csb/{14.1,14.2,current}/{x86,x86_64}/
#slackers:      http://slack.conraid.net/repository/slackware64-current/
#slacke18:      http://ngc891.blogdns.net/pub/slacke18/slackware{,64}-{14.1}/
#studioware:    http://slackware.uk/studioware/14.2
#slackonly:     http://packages.slackonly.com/pub/packages/{14.1,14.2,current}-{x86,x86_64}/
#rlworkman:     http://rlworkman.net/pkgs/{14.0,14.1,14.2,current}/
#slackel:       http://www.slackel.gr/repo/{i486,x86_64}/current/
#connochaetos:  http://connochaetos.org/slack-n-free/slack-n-free{,64}-{14.2}/
#slint:         http://slackware.uk/slint/{i586,x86_64}/slint-{14.2,testing}/
#salixos:       http://download.salixos.org/{i486,x86_64}/{14.0,14.1,14.2}/
#salixextra:    http://download.salixos.org/{i486,x86_64}/extra-{14.2}/

there is something wrong ?