Mandrake 10.1(Xorg) hangs on video driver (ATI Radeon mobility 9800)

hi,

i`v installed mandrake 10.1 (for the first time) and my system hangs after 1-40 minutes when the GUI is loaded (kde). i suspected it was caused by the video card driver, so I'v installed the latest driver from ATI and now i have 3d support. Still the problem occurs.

before the system hangs , the following error is mentioned in /var/log/kernel/errors:
Oct 13 09:41:36 charlie kernel: audit(1097660462.4294966757:0): initialized
Oct 13 09:41:36 charlie kernel: usb 3-2: unable to read config index 0 descriptor/start
Oct 13 09:41:36 charlie kernel: usb 3-2: can't read configurations, error -71
Oct 13 09:41:36 charlie kernel: ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Oct 13 09:41:43 charlie kernel: [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)

the last errors always occurs before a total hang!

my video card has 256MB mem (hex 0x10000000) as mentioned in lspci -v:
...
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4a4e (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 5106
Flags: bus master, VGA palette snoop, 66Mhz, medium devsel, latency 255, IRQ 16
Memory at e0000000 (32-bit, prefetchable) (size=256M)
I/O ports at c000 (size=256)
Memory at fcff0000 (32-bit, non-prefetchable) (size=64K)
Expansion ROM at 80000000 [disabled] (size=128K)
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2
...



/proc/mtrr:
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0xfeda0000 (4077MB), size= 128KB: write-combining, count=1
reg02: base=0xe0000000 (3584MB), size= 1MB: write-combining, count=1
reg03: base=0xf0000000 (3840MB), size= 128MB: write-combining, count=1

i tried to alter the mtrr mapping with
$ echo 'disable=02' > /proc/mtrr
$ echo "base=0xe0000000 size=0x10000000 type=write-combining" >/proc/mtrr

but that doesn't seem to work.

Anyone have some ideas???

i'll give some extra info:

warnings in /var/log/Xorg.0.log

(WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)


output of glxinfo

name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_SGI_make_current_read, GLX_SGIS_multisample
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
GLX_ATI_render_texture
GLX extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9800 Generic
OpenGL version string: 1.3.4641 (X4.3.0-3.14.1)
OpenGL extensions:
GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
GL_S3_s3tc, GL_ARB_depth_texture, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_multisample,
GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
GL_ARB_vertex_blend, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program,
GL_ARB_window_pos, GL_ATI_draw_buffers, GL_ATI_element_array,
GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader, GL_ATI_map_object_buffer,
GL_ATI_separate_stencil, GL_ATI_texture_compression_3dc,
GL_ATI_texture_env_combine3, GL_ATI_texture_float,
GL_ATI_texture_mirror_once, GL_ATI_vertex_array_object,
GL_ATI_vertex_attrib_array_object, GL_ATI_vertex_streams,
GL_ATIX_texture_env_combine3, GL_ATIX_texture_env_route,
GL_ATIX_vertex_shader_output_point_size, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_texgen_reflection,
GL_EXT_texture3D, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_EXT_vertex_shader,
GL_HP_occlusion_test, GL_NV_texgen_reflection, GL_NV_blend_square,
GL_NV_occlusion_query, GL_SGI_color_matrix, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_lod,
GL_SGIS_generate_mipmap, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x2b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x2c 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x2d 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x2e 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x2f 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 2 1 None
0x30 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 2 1 None
0x31 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 2 1 None
0x32 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 2 1 None
0x33 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x34 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x35 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x36 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x37 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 4 1 None
0x38 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 4 1 None
0x39 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 4 1 None
0x3a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 4 1 None
0x3b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x3c 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x3d 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x3e 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x3f 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 6 1 None
0x40 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 6 1 None
0x41 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 6 1 None
0x42 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 6 1 None
0x43 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x44 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x45 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x46 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x47 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x48 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x49 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x4a 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x4b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x4c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x4d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x4e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x4f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 2 1 None
0x50 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 2 1 None
0x51 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 2 1 None
0x52 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 2 1 None
0x53 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x54 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x55 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x56 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x57 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 4 1 None
0x58 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 4 1 None
0x59 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 4 1 None
0x5a 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 4 1 None
0x5b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x5c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x5d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x5e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x5f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 6 1 None
0x60 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 6 1 None
0x61 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 6 1 None
0x62 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 6 1 None



extract of /etc/X11/XF86Config

...
# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 60.0
VertRefresh 59-75
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "LVDS,AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
# BusID "PCI:1:0:0" # no device found at config time
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1680x1050"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
...

add-on

dmesg|grep mtrr:

mtrr: v2.0 (20020519)
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x100000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)

add-on 2 ;-)
i solved the mtrr problem (no error in /var/log/kernel/errors) but it still hangs
the hang happens suddenly without warning, especially when opening or moving windows or scrolling.
everything just hangs: no ssh from another machine possible! (yes, sshd is up)
no hang occurs when i use the tty1-6 (even if kde is still running (runstate 5))
i have totaly no clue!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

michiel

hello,
anyone a clue??????????????

michiel

Are there any errors or warnings still in the /var/log/Xorg.0.log?

I noticed

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 60.0
VertRefresh 59-75
Option "DPMS"

in your .conf. Is this a LCD? 75 seems low vert refres, is all.

hi, thanx for the reply

Xorg.0.log only contains warnings:

(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Only single display is connected, DesktopOption will be ignored
(WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)


yes my screen is a laptop LCD screen (res 1680x1050)

michiel

I don't know where to go from this. I did have a similar problem a few years ago with my P-III system. It had a ASUS P3B-F motherboard, which had problems with a voltage spike to the processor. I had to solve it with by soldering a capacitor between pins A1-A3 on the processor socket. The load caused by using X and scrolling a web page was enough to cause a hard lock.

I hope that your computer isn't a victim of this problem (although easily fixed).

i don't think thats the problem; under windows and linux in text mode i have no problems with high loads.

my colleges have the same model and mandrake is just working fine there; the only difference is the video card

michiel

try the "nolapic" parameter to the kernel.

nope - that didn't work...

getting desperate ;-)

michiel

Originally posted by michielmertens nope - that didn't work... getting desperate ;-) michiel

Shouldn't that be "noapic"? You should be able to specify that on the kernel line of your crub configuration or in the append="bla bla bla" section of your /etc/lilo.conf stanza

yep . i noticed it should be 'noapic'

while lilo i hitted esc and entered "linux noapic"

but again..... it crashed
mm

nolapic is one possible requirement. (This was documented by the Mandrake 9.2 erratta).

However assuming that your installation itself is otherwise fine...

also try what you did like this.

linux noapic nousb noagp nopcmcia noapm noacpi

If this works then you'll need to try again eliminating each aguement one at a time until you get the freeze again.

Then you'll have found the offending item.

vectordrake:

You can also specify this on the command line to try out the parameters. Most of the Live CD's do this as well.

OK; did that
with all options disabled
i opened 2 windows................................. it hangs!

michiel

Originally posted by vectordrake Shouldn't that be "noapic"? You should be able to specify that on the kernel line of your crub configuration or in the append="bla bla bla" section of your /etc/lilo.conf stanza

No.

it's nolapic for "no local apic".