Streaming video from guest to host QEMU.

Hi!
I have Linux on my computer.
Windows is installed in the QEMU virtual machine.
A webcam has been added to the virtual machine.
What is the best way to transfer an image from a virtual machine's webcam to the host machine?
Do I need to use a bridge?
I'm a little confused.
Thank you.

P.S. My host machine IP is 192.168.1.23/24.
I do translation in OBS on my guest machine udp://192.168.1.30:11000. And when I try to receive on host by udp://192.168.1.30:11000, there is nothing...

what is the exact output of "ip ad sh" on both the host and guest?

Originally Posted by Skaperen what is the exact output of "ip ad sh" on both the host and guest?

It's a host:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: enp44s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether a0:36:bc:20:72:51 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether a0:59:50:65:e4:83 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.5/24 metric 600 brd 192.168.1.255 scope global dynamic wlan0
       valid_lft 9796sec preferred_lft 9796sec
    inet6 2403:6200:8871:2154:a259:50ff:fe65:e483/64 scope global dynamic mngtmpaddr noprefixroute
       valid_lft 259200sec preferred_lft 172800sec
    inet6 fe80::a259:50ff:fe65:e483/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever
5: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 52:54:00:b8:ff:5e brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
6: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:c4:c6:5a brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fec4:c65a/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever

It's the guest:

Ethernet adapter Ethernet Instance 0:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::6a2b:2a2b:577c:5f81%5
   IPv4 Address. . . . . . . . . . . : 192.168.122.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.122.1

I'd use some sort of remote desktop.