AMD/ATI and 1080TI(nvidia) display/driver incompatibility

I would just use the GTX 1080 Ti. Its not going to break a sweat with 3 monitors. https://www.nvidia.com/object/unix.html

Also Fedora 25's end of life was "2017-12-12"
http://fedoraproject.org/wiki/End_of_life

I am using the Ysplitter dvi, yes.

Xorg is below. It looks off though...? I think I am on Wayland.


[ 118.190] (--) Log file renamed from "/var/log/Xorg.pid-2119.log" to "/var/log/Xorg.0.log"
[ 118.191]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 118.191] X Protocol Version 11, Revision 0
[ 118.191] Build Operating System: 4.15.14-300.fc27.x86_64
[ 118.191] Current Operating System: Linux localhost.localdomain 4.16.14-200.fc27.x86_64 #1 SMP Tue Jun 5 16:30:48 UTC 2018 x86_64
[ 118.192] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.14-200.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
[ 118.192] Build Date: 12 April 2018 03:55:14PM
[ 118.192] Build ID: xorg-x11-server 1.19.6-7.fc27
[ 118.192] Current version of pixman: 0.34.0
[ 118.192] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 118.192] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 118.192] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 12 19:07:08 2018
[ 118.203] (==) Using config file: "/etc/X11/xorg.conf"
[ 118.203] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 118.203] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 118.258] Parse error on line 76 of section Screen in file /etc/X11/xorg.conf
"Section" is not a valid keyword in this section.
[ 118.258] (EE) Problem parsing the config file
[ 118.258] (EE) Error parsing the config file
[ 118.258] (EE)
Fatal server error:
[ 118.258] (EE) no screens found(EE)
[ 118.258] (EE)
Please consult the Fedora Project support
at http://wiki.x.org
for help.
[ 118.258] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 118.258] (EE)
[ 118.258] (EE) Server terminated with error (1). Closing log file.

Originally Posted by dzk87 Xorg is below. It looks off though...? I think I am on Wayland.

I've never used Wayland yet, but the following is the result of the current F27's Xorg having been attempted:

[ 118.191] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 118.191] X Protocol Version 11, Revision 0 [ 118.191] Build Operating System: 4.15.14-300.fc27.x86_64 [ 118.191] Current Operating System: Linux localhost.localdomain 4.16.14-200.fc27.x86_64 #1 SMP Tue Jun 5 16:30:48 UTC 2018 x86_64 [ 118.192] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.14-200.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8 [ 118.192] Build Date: 12 April 2018 03:55:14PM [ 118.192] Build ID: xorg-x11-server 1.19.6-7.fc27

And the following means you need to remove the file, or fix whatever's on or follows line 76 of, /etc/X11/xorg.conf:

[ 118.258] Parse error on line 76 of section Screen in file /etc/X11/xorg.conf "Section" is not a valid keyword in this section. [ 118.258] (EE) Problem parsing the config file [ 118.258] (EE) Error parsing the config file [ 118.258] (EE) Fatal server error: [ 118.258] (EE) no screens found(EE)

Show it to us if you want help figuring out what's wrong with it.

If you reconfigure the bootloader to remove rhgb quiet from it you may see useful boot messages providing clues to problems. The Grub2 bootloader menu may already have a selection that provides this equivalent, termed recovery or rescue or some such. (My Fedoras are installed sans bootloader, so I don't know the precise language in current use.)

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 390.67 (buildmeister@swio-display-x64-rhel04-18) Fri Jun 1 04:26:22 PDT 2018

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
FontPath "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Device"
Identifier "Device1"
Driver "ATI/AMD"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Device1"
Monitor "Monitor0"
DefaultDepth 24
Option "AllowEmptyInitialConfiguration" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection


Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor0"
DefaultDepth 24
Option "AllowEmptyInitialConfiguration" "True"
SubSection "Display"
Depth 24
EndSubSection


Section "Screen"
Identifier "Screen3"
Device "Device0"
Monitor "Monitor1"
DefaultDepth 24
Option "AllowEmptyInitialConfiguration" "True"
SubSection "Display"
Depth 24
EndSubSection


EndSection


This is my Xorg.conf

Wayland is being used by default.

Line 76 is the start of section 3.

Looks like the line 76 error is triggered because the previous section is missing an EndSection line.

I'll fix that.

I can see what the results are ASAP. Can't restart my computer right now to find out.