Ok guys... I'm not sure why this is giving me so much trouble, but here is everything... If you have any idea why my Client machine can't get to the Internet, please post!!! I feel like I've tried everything!
Client runs Win2k, set up to accept dhcp address, gateway statically set to 192.168.69.1 (eth1)
eth0 - obtains dynamic ip from cable modem
eth1 - hands out local ip address to client machine
ifconfig on Linux server:
Code:
eth0 Link encap:Ethernet HWaddr 00:40:05:7A:F0:30
inet addr:65.26.42.131 Bcast:255.255.255.255 Mask:255.255.254.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2155 errors:0 dropped:0 overruns:0 frame:0
TX packets:754 errors:0 dropped:0 overruns:0 carrier:0
collisions:18 txqueuelen:100
RX bytes:530368 (517.9 Kb) TX bytes:136649 (133.4 Kb)
Interrupt:10 Base address:0x3000
eth1 Link encap:Ethernet HWaddr 00:09:5B:0B:74:E7
inet addr:192.168.69.1 Bcast:192.168.69.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:107 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:12708 (12.4 Kb) TX bytes:4407 (4.3 Kb)
Interrupt:9 Base address:0xb000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
Here's my dhcpd.conf file that hands out the IP's to the client:
Code:
#dhcpd.conf
default-lease-time 600;
max-lease-time 7200;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.69.255;
option routers 192.168.69.1;
option domain-name-servers eth0.kc.rr.com;
option domain-name "kc.rr.com";
subnet 192.168.69.0 netmask 255.255.255.0 {
range 192.168.69.10 192.168.69.100;
}
Here's the /etc/sysconfig/network file:
Code:
NETWORKING=yes
HOSTNAME='localhost.localdomain'
FORWARD_IPV4=true
iptables --list gives me this:
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ipconfig from client looks like this:
Connection-specific DNS Suffix : kc.rr.com
IP Address : 192.168.69.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.69.1
Notes:
Client is able to ping both eth0 and eth1, server can ping client.
Client can NOT ping ww.yahoo.com or it's ip address 216.109.125.78
I've also tried some other major sites... as well as cannot open IE to browse a site.
Again, DHCP works fine, server can hit the net just fine, all that is wrong is the client cannot seem to get through the internet connection of the server.
I'll plan to lock down the input on iptables after i can get this to work....
Please help if you have any idea! I'm so confused!!
Thanks in advance!!
Aaron (KowCiller)