Hello,
I have a problem with the network card, it doesn't function.
Code:
Autodetecting networking...
Eth0: 3c59x ONBOOT=yes
I read elsewhere that this driver is the right one for my card.
Anyway, this is what happens
Code:
Bringing up interface eth0...................................[ FAIL ]
Determining IP information for eth0 (dhcpcd).................[ FAIL ]
eth0: dhcpcd 4.0.10 starting
eth0: waiting for carrier
eth0: timed out
The card isn't active at all, the attached ethernet hardware would indicate.
Code:
# /sbin/lspci
0:12.0 Ethernet controller: 3Com Corporation 3c900 10Mbps Combo [Boomerang]
Code:
# uname -r
2.6.28.7_rescuecd-1
Code:
# dmesg
[ 74.505682] 3c59x 0000:00:12.0: enabling device (0004 -> 0005)
[ 74.505771] 3c59x: Donald Becker and others.
[ 74.505866] 0000:00:12.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0001fcc0.
[ 75.501572] eth0: setting half-duplex.
[ 86.461480] eth0: no IPv6 routers present
Code:
# mii-tool
eth0: 10 Mbps, half duplex, link ok
# ifconfig
eth0
(inet6 addr, but no inet addr)
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:1
When I try to ping, packets increase in
lo, but they do not in
eth0.