|
Slackware 14.2 and intel i3-6100 brightness level not working
Hello! I have a problem and it is not working the brightness level, I see the level that goes up and down, but does not effect, in slackware 14.2 and intel i3-6100, I have to fix them with redshift or with f.lux on windows8 with the same problem.
Ls / sys / class / backlight /
Acpi_video0
- intel_backlight does not appear, how to load this?
I have tried all sorts of commands but there is nothing to do.
In windows8 it does not work either. I hope the translation from Spanish to English
Is acceptable
linux appaco is online now Report This Post
lspci
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)
With the advancement of technology fail some things like this, because in my laptop with intel pentium did not have this problem. A greeting..
|
