Error while trying to record an Audio-CD with K3b

Hi, my recorder is: Sony CD-RW CRX175A1, and K3b recognizes it. well, this is the error I got when I started to burn the CD (with simulation) :

System
-----------------------
K3b Version: 0.11.9
KDE Version: 3.2.1
QT Version:  3.3.1

cdrdao
-----------------------
Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas@daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
ERROR: Inquiry command failed on 'ATAPI:/dev/hdb'.
ATAPI:/dev/hdb:   Rev: 
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)
Starting write simulation ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Process can be aborted with QUIT signal (usually CTRL-\).
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup write parameters for session-at-once mode.
ERROR: Please try to use the 'generic-mmc-raw' driver.
ERROR: Simulation failed.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/hdb --driver generic-mmc:0x00000010 --speed 24 --simulate -n -v 2 --eject --remote 20 /tmp/kde-diam0nd/k3b_audio_Focus2_.toc

This is what was shown to me in "Show Debugging Output". In the writing window itself, it said:

Using cdrdao 1.1.8 - Copyright (c) .....
Starting dao simulation at 24x speed...
Medium or burner do not support writing at 24x speed
switching down to burn speed 0x
Error while decoding audio tracks.
Unlocking drive...
Removing buffer files.

What can I do?
TIA.

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Did you check to see if your drive is listed ? I get the same problem with my DVD+-R drive burning audio CD's because it's a very new drive. Try dropping the burn speed down to 8x and see if that makes any difference.

Well it is supported... I checked their site now and It's listed.
setting the burning speed to 8x doesn't help.
Umm maybe anything else I can do?

help?

I have this same exact problem. I'm root and it still doesn't work.

K, i found the problem

Don't do DAO, do TAO or w/e instead and it works.