Quote:
Originally Posted by syg00
O.K., that says only one disk - if it was plugged in, it isn't being recognised. Try un-plugging/plugging in, and show us this
|
unplugged
[ 4360.395917] cfg80211: Restoring regulatory settings
[ 4360.395926] cfg80211: Calling CRDA to update world regulatory domain
[ 4360.404691] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4360.404701] cfg80211: World regulatory domain updated:
[ 4360.404706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4360.404714] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4360.404721] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4360.404728] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4360.404734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4360.404740] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4361.412316] wlan0: authenticate with e0:91:f5:7e:27:02 (try 1)
[ 4361.414333] wlan0: authenticated
[ 4361.444159] wlan0: associate with e0:91:f5:7e:27:02 (try 1)
[ 4361.448153] wlan0: RX ReassocResp from e0:91:f5:7e:27:02 (capab=0x411 status=0 aid=2)
[ 4361.448164] wlan0: associated
plugged in
dmesg | tail -n 15
[ 4360.404714] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4360.404721] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4360.404728] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4360.404734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4360.404740] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4361.412316] wlan0: authenticate with e0:91:f5:7e:27:02 (try 1)
[ 4361.414333] wlan0: authenticated
[ 4361.444159] wlan0: associate with e0:91:f5:7e:27:02 (try 1)
[ 4361.448153] wlan0: RX ReassocResp from e0:91:f5:7e:27:02 (capab=0x411 status=0 aid=2)
[ 4361.448164] wlan0: associated
[ 4446.144227] usb 1-3: new high-speed USB device number 10 using ehci_hcd
[ 4446.277475] usb 1-3: config 1 has an invalid interface number: 2 but max is 1
[ 4446.277486] usb 1-3: config 1 has no interface number 1
[ 4446.280617] scsi12 : usb-storage 1-3:1.0
[ 4446.283281] generic-usb 0003:04B4:6830.0009: hiddev0,hidraw0: USB HID v1.10 Device [Cypress AT2LP RC58] on usb-0000:00:12.2-3/input2