LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Ubuntu (https://www.linuxquestions.org/questions/ubuntu-63/)
-   -   trying to install mmc sd card reader on sony vgn-tz43fn, ubuntu 12.04 (https://www.linuxquestions.org/questions/ubuntu-63/trying-to-install-mmc-sd-card-reader-on-sony-vgn-tz43fn-ubuntu-12-04-a-4175428397/)

Polako 09-21-2012 10:40 AM
trying to install mmc sd card reader on sony vgn-tz43fn, ubuntu 12.04
 
hi there this is my sistem spec.

Code:
polako@polako-VGN-TZ45FN:~$ lspci | grep Ricoh
09:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
09:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
09:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)

markush 09-25-2012 04:41 PM
Hello, welcome to LQ,

if the device doesn't work, please post the output of "demsg tail".

What have you done so far? is it an USB-Cardreader? or builtin? if USB you should use the lsusb command instead of lspci.

Could you please insert an SD-card into the reader and post the output of "ls /dev/sd*"

Markus

Polako 10-04-2012 10:38 AM
hey there...first of all, thanks for your help.
been a long time, i haven't been able to access internet from my pc with ubuntu, now i have internet again and i have tried demsg tail.

Code:
polako@polako-VGN-TZ45FN:~$ demsg tail
No command 'demsg' found, did you mean:
 Command 'dmesg' from package 'util-linux' (main)
demsg: command not found

i haven't done anything yet, and it's an hardware builtin.
here's the output for "ls /dev/sd/".

Code:
polako@polako-VGN-TZ45FN:~$ ls /dev/sd
ls: cannot access /dev/sd: No such file or directory

markush 10-04-2012 12:00 PM
Hi,

sorry, I had a typo in my posting above. The name of the command is dmesg.

In the second command, don't forget the asterisk "*", it is
Code:
ls /dev/sd*
Markus

Polako 10-05-2012 04:07 PM
i don't know why it doesn't allow me to show the full log.

Code:
[ 7859.888137] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 7860.088096] wlan0: associate with 00:26:99:98:71:80 (try 3)
[ 7860.288163] wlan0: association with 00:26:99:98:71:80 timed out
[ 7867.043564] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 7867.240168] wlan0: authenticate with 00:26:99:98:71:80 (try 2)
[ 7867.440138] wlan0: authenticate with 00:26:99:98:71:80 (try 3)
[ 7867.449739] wlan0: authenticated
[ 7867.450173] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 7867.648102] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 7867.650954] wlan0: RX ReassocResp from 00:26:99:98:71:80 (capab=0x421 status=0 aid=1)
[ 7867.650964] wlan0: associated
[ 7867.730822] wlan0: deauthenticated from 00:26:99:98:71:80 (Reason: 2)
[ 7867.748443] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 7867.748456] cfg80211: Restoring regulatory settings
[ 7867.748467] cfg80211: Calling CRDA to update world regulatory domain
[ 7867.759685] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7867.759695] cfg80211: World regulatory domain updated:
[ 7867.759701] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7867.759710] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7867.759718] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7867.759725] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7867.759733] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7867.759740] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7869.497424] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 7869.696120] wlan0: authenticate with 00:26:99:98:71:80 (try 2)
[ 7869.708426] wlan0: authenticated
[ 7869.708940] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 7869.908158] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 7869.911013] wlan0: RX ReassocResp from 00:26:99:98:71:80 (capab=0x421 status=0 aid=1)
[ 7869.911022] wlan0: associated
[ 7869.991181] wlan0: deauthenticated from 00:26:99:98:71:80 (Reason: 2)
[ 7870.001576] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 7870.001589] cfg80211: Restoring regulatory settings
[ 7870.001600] cfg80211: Calling CRDA to update world regulatory domain
[ 7870.012336] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7870.012346] cfg80211: World regulatory domain updated:
[ 7870.012351] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7870.012360] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7870.012367] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7870.012375] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7870.012383] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7870.012390] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7871.829933] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 7872.028098] wlan0: authenticate with 00:26:99:98:71:80 (try 2)
[ 7872.031022] wlan0: authenticated
[ 7872.031452] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 7872.228164] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 7872.428140] wlan0: associate with 00:26:99:98:71:80 (try 3)
[ 7872.628138] wlan0: association with 00:26:99:98:71:80 timed out
[ 7879.365439] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 7879.564155] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 7879.764142] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 7879.964138] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 7885.281283] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7886.687433] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 7886.884048] wlan0: authenticate with 00:26:99:98:71:80 (try 2)
[ 7887.084081] wlan0: authenticate with 00:26:99:98:71:80 (try 3)
[ 7887.284096] wlan0: authentication with 00:26:99:98:71:80 timed out
[ 7894.057079] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 7894.256146] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 7894.456107] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 7894.656144] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 7901.399907] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 7901.596094] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 7901.796148] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 7901.996092] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 7950.744224] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 7950.747102] wlan0: direct probe responded
[ 7950.772045] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 7950.785397] wlan0: authenticated
[ 7950.785672] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 7950.788427] wlan0: RX ReassocResp from 00:26:99:98:71:80 (capab=0x421 status=0 aid=1)
[ 7950.788434] wlan0: associated
[ 7950.807788] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7951.861210] wlan0: deauthenticated from 00:26:99:98:71:80 (Reason: 2)
[ 7951.880832] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 7951.880845] cfg80211: Restoring regulatory settings
[ 7951.880856] cfg80211: Calling CRDA to update world regulatory domain
[ 7951.889435] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7951.889443] cfg80211: World regulatory domain updated:
[ 7951.889446] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7951.889452] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7951.889457] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7951.889461] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7951.889466] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7951.889470] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7953.757112] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 7953.956131] wlan0: authenticate with 00:26:99:98:71:80 (try 2)
[ 7954.156142] wlan0: authenticate with 00:26:99:98:71:80 (try 3)
[ 7954.167074] wlan0: authenticated
[ 7954.167481] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 7954.364126] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 7954.564146] wlan0: associate with 00:26:99:98:71:80 (try 3)
[ 7954.567013] wlan0: RX ReassocResp from 00:26:99:98:71:80 (capab=0x421 status=0 aid=1)
[ 7954.567024] wlan0: associated
[ 7961.664098] wlan0: no IPv6 routers present
[ 8054.121888] wlan0: deauthenticated from 00:26:99:98:71:80 (Reason: 2)
[ 8054.136455] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 8054.136468] cfg80211: Restoring regulatory settings
[ 8054.136480] cfg80211: Calling CRDA to update world regulatory domain
[ 8054.147222] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8054.147232] cfg80211: World regulatory domain updated:
[ 8054.147237] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8054.147246] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8054.147254] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8054.147261] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8054.147269] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8054.147276] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8055.979681] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 8056.176161] wlan0: authenticate with 00:26:99:98:71:80 (try 2)
[ 8056.177949] wlan0: authenticated
[ 8056.178473] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 8056.376137] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 8056.576124] wlan0: associate with 00:26:99:98:71:80 (try 3)
[ 8056.591772] wlan0: RX ReassocResp from 00:26:99:98:71:80 (capab=0x421 status=0 aid=1)
[ 8056.591781] wlan0: associated
[ 8056.667470] wlan0: deauthenticated from 00:26:99:98:71:80 (Reason: 2)
[ 8056.677886] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 8056.677899] cfg80211: Restoring regulatory settings
[ 8056.677910] cfg80211: Calling CRDA to update world regulatory domain
[ 8056.688997] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8056.689007] cfg80211: World regulatory domain updated:
[ 8056.689012] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8056.689020] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8056.689028] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8056.689036] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8056.689043] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8056.689051] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8058.500708] wlan0: authenticate with 00:26:99:98:71:80 (try 1)
[ 8058.502455] wlan0: authenticated
[ 8058.502981] wlan0: associate with 00:26:99:98:71:80 (try 1)
[ 8058.700140] wlan0: associate with 00:26:99:98:71:80 (try 2)
[ 8058.900100] wlan0: associate with 00:26:99:98:71:80 (try 3)
[ 8059.100136] wlan0: association with 00:26:99:98:71:80 timed out
[ 8065.822528] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8066.020090] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8066.220136] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8066.420154] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8072.293081] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8073.154720] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8073.352111] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8073.552063] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8073.752147] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8080.495767] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8080.692099] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8080.892133] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8081.092092] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8087.809489] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8088.008071] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8088.208055] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8088.408072] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8101.864876] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8102.064132] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8102.264109] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8102.464130] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8109.252310] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8109.452072] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8109.652063] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8109.852082] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8116.577099] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8116.776094] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8116.976127] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8117.176107] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8123.866167] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8124.064243] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8124.264122] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8124.464115] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8131.198437] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8131.396062] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8131.596075] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8131.796062] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8145.214707] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8145.412076] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8145.612127] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8145.812042] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8159.201785] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8159.400074] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8159.600104] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8159.800080] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8166.527686] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8166.724070] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8166.924074] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8167.124056] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8173.806213] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8174.004121] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8174.204108] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8174.404107] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8181.139294] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 1/3)
[ 8181.336081] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 2/3)
[ 8181.536063] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 3/3)
[ 8181.740068] wlan0: direct probe to 00:26:cb:a9:94:a0 timed out
[ 8195.310542] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 1/3)
[ 8195.508158] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 2/3)
[ 8195.708124] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 3/3)
[ 8195.908130] wlan0: direct probe to 00:26:cb:a9:94:a0 timed out
[ 8202.685520] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8202.884148] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8203.084107] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8203.284141] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8210.053182] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8210.252147] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8210.452097] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8210.652128] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8217.369300] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8217.568084] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8217.768079] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8217.968193] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8224.694789] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8224.892183] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8225.092066] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8225.292062] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8238.717399] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8238.916117] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8239.116114] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8239.316112] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8246.063361] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8246.260140] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8246.460072] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8246.660104] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8253.401343] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8253.600154] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8253.800104] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8254.000075] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8263.704544] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8263.904136] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8264.104134] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8264.304105] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8271.030669] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8271.228123] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8271.428152] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8271.628118] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8278.345225] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8278.544089] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8278.744080] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8278.944097] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8285.701944] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8285.900081] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8286.100080] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8286.300047] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8293.002045] wlan0: direct probe to 00:26:99:98:71:80 (try 1/3)
[ 8293.200109] wlan0: direct probe to 00:26:99:98:71:80 (try 2/3)
[ 8293.400159] wlan0: direct probe to 00:26:99:98:71:80 (try 3/3)
[ 8293.600092] wlan0: direct probe to 00:26:99:98:71:80 timed out
[ 8300.331762] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 1/3)
[ 8300.528141] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 2/3)
[ 8300.728143] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 3/3)
[ 8300.928094] wlan0: direct probe to 00:26:cb:a9:94:a0 timed out
[ 8314.297480] wlan0: direct probe to 00:26:cb:a9:97:60 (try 1/3)
[ 8314.496073] wlan0: direct probe to 00:26:cb:a9:97:60 (try 2/3)
[ 8314.696134] wlan0: direct probe to 00:26:cb:a9:97:60 (try 3/3)
[ 8314.896108] wlan0: direct probe to 00:26:cb:a9:97:60 timed out
[ 8321.622798] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 1/3)
[ 8321.820072] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 2/3)
[ 8322.020058] wlan0: direct probe to 00:26:cb:a9:94:a0 (try 3/3)
[ 8322.220056] wlan0: direct probe to 00:26:cb:a9:94:a0 timed out
[ 8328.960542] wlan0: authenticate with 00:23:eb:e2:cc:90 (try 1)
[ 8328.962256] wlan0: authenticated
[ 8328.981976] wlan0: associate with 00:23:eb:e2:cc:90 (try 1)
[ 8328.985218] wlan0: RX AssocResp from 00:23:eb:e2:cc:90 (capab=0x421 status=0 aid=2)
[ 8328.985224] wlan0: associated
[ 8329.011890] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8339.592095] wlan0: no IPv6 routers present
[ 8384.836437] sky2 0000:02:00.0: eth0: disabling interface
[ 8385.258693] wlan0: deauthenticating from 00:23:eb:e2:cc:90 by local choice (reason=3)
[ 8385.265886] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 8385.265900] cfg80211: Restoring regulatory settings
[ 8385.265947] cfg80211: Calling CRDA to update world regulatory domain
[ 8385.278745] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8385.278751] cfg80211: World regulatory domain updated:
[ 8385.278755] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8385.278760] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8385.278765] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8385.278770] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8385.278774] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8385.278779] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8387.234004] PM: Syncing filesystems ... done.
[ 8387.249913] PM: Preparing system for mem sleep
[ 8387.752474] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8387.768158] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8387.784134] PM: Entering mem sleep
[ 8387.784205] Suspending console(s) (use no_console_suspend to debug)
[ 8387.785517] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8387.785681] sd 0:0:0:0: [sda] Stopping disk
[ 8387.880389] ehci_hcd 0000:00:1d.7: PCI INT D disabled

Polako 10-05-2012 04:08 PM
hERE'S THE CONTINUATION
Code:
[ 8387.880395] uhci_hcd 0000:00:1d.3: PCI INT A disabled
[ 8387.880413] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 8387.880421] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 8387.880435] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 8387.881268] i915 0000:00:02.0: PCI INT A disabled
[ 8387.888208] ACPI handle has no context!
[ 8388.188271] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 8388.204163] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.706 msecs
[ 8388.343616] PM: suspend of drv:sd dev:0:0:0:0 complete after 558.102 msecs
[ 8388.343659] PM: suspend of drv:scsi dev:target0:0:0 complete after 558.078 msecs
[ 8388.343689] PM: suspend of drv:scsi dev:host0 complete after 546.868 msecs
[ 8388.343924] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 8388.343952] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
[ 8388.343958] PM: suspend of drv:ata_piix dev:0000:00:1f.1 complete after 463.612 msecs
[ 8388.343988] PM: suspend of drv: dev:pci0000:00 complete after 463.512 msecs
[ 8388.343997] PM: suspend of devices complete after 559.421 msecs
[ 8388.344016] PM: suspend devices took 0.560 seconds
[ 8388.376151] iwl4965 0000:03:00.0: power state changed by ACPI to D3
[ 8388.532140] sky2 0000:02:00.0: power state changed by ACPI to D3
[ 8388.532163] PM: late suspend of drv:sky2 dev:0000:02:00.0 complete after 155.998 msecs
[ 8388.532347] ehci_hcd 0000:00:1d.7: PME# enabled
[ 8388.532358] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 8388.548209] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 8388.548280] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 8388.548348] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 8388.548415] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 8388.548877] PM: late suspend of devices complete after 204.856 msecs
[ 8388.549211] ACPI: Preparing to enter system sleep state S3
[ 8388.604259] PM: Saving platform NVS memory
[ 8388.605486] Disabling non-boot CPUs ...
[ 8388.708126] CPU 1 is now offline
[ 8388.708802] Extended CMOS year: 2000
[ 8388.708802] ACPI: Low-level resume complete
[ 8388.708802] PM: Restoring platform NVS memory
[ 8388.708802] Extended CMOS year: 2000
[ 8388.708802] Enabling non-boot CPUs ...
[ 8388.708802] Booting Node 0 Processor 1 APIC 0x1
[ 8388.708802] smpboot cpu 1: start_ip = 9b000
[ 8388.607093] Initializing CPU#1
[ 8388.607093] Calibrating delay loop (skipped) already calibrated this CPU
[ 8388.720582] NMI watchdog enabled, takes one hw-pmu counter.
[ 8388.724255] CPU1 is up
[ 8388.726486] ACPI: Waking up from system sleep state S3
[ 8388.828413] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8388.828461] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 8388.828520] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 8388.828571] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
[ 8388.828589] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001)
[ 8388.828598] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600)
[ 8388.828606] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20002020)
[ 8388.828620] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8388.828630] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 8388.828704] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 8388.828722] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x84118401)
[ 8388.828730] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xfc00fc00)
[ 8388.828738] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20006060)
[ 8388.828753] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8388.828763] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 8388.828835] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030a)
[ 8388.828853] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
[ 8388.828861] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800)
[ 8388.828869] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[ 8388.828883] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8388.828893] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 8388.828965] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a)
[ 8388.828984] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
[ 8388.828992] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
[ 8388.829000] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x4040)
[ 8388.829015] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8388.829025] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 8388.829149] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 8388.829223] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 8388.829294] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 8388.829365] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 8388.829417] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 8388.829444] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 8388.829452] ehci_hcd 0000:00:1d.7: PME# disabled
[ 8388.829481] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x83f18001)
[ 8388.829489] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xfc10fc10)
[ 8388.829497] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22805050)
[ 8388.860164] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 8388.860171] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 8388.860207] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 8388.860429] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8388.860537] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)
[ 8388.860585] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004)
[ 8388.860614] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 8388.860657] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 8388.860976] iwl4965 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8388.861035] iwl4965 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc000004)
[ 8388.861049] iwl4965 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 8388.861067] iwl4965 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
[ 8388.861183] yenta_cardbus 0000:09:04.0: restoring config space at offset 0xf (was 0x7000100, writing 0x5800100)
[ 8388.861191] yenta_cardbus 0000:09:04.0: restoring config space at offset 0xe (was 0x0, writing 0x50fc)
[ 8388.861199] yenta_cardbus 0000:09:04.0: restoring config space at offset 0xd (was 0x0, writing 0x5000)
[ 8388.861208] yenta_cardbus 0000:09:04.0: restoring config space at offset 0xc (was 0x0, writing 0x54fc)
[ 8388.861216] yenta_cardbus 0000:09:04.0: restoring config space at offset 0xb (was 0x0, writing 0x5400)
[ 8388.861224] yenta_cardbus 0000:09:04.0: restoring config space at offset 0xa (was 0x0, writing 0x8ffff000)
[ 8388.861232] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x8c000000)
[ 8388.861240] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
[ 8388.861248] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
[ 8388.861256] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09)
[ 8388.861267] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x4 (was 0x0, writing 0x88000000)
[ 8388.861275] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800)
[ 8388.861285] yenta_cardbus 0000:09:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[ 8388.861318] yenta_cardbus 0000:09:04.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 8388.861322] yenta_cardbus 0000:09:04.0: MMC cards are now supported by standard SDHCI controller
[ 8388.876168] firewire_ohci 0000:09:04.1: BAR 0: set to [mem 0xfc100000-0xfc1007ff] (PCI address [0xfc100000-0xfc1007ff])
[ 8388.876184] firewire_ohci 0000:09:04.1: restoring config space at offset 0xf (was 0x4020200, writing 0x402020a)
[ 8388.876214] firewire_ohci 0000:09:04.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 8388.876225] firewire_ohci 0000:09:04.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 8388.892152] r592 0000:09:04.4: BAR 0: set to [mem 0xfc100c00-0xfc100cff] (PCI address [0xfc100c00-0xfc100cff])
[ 8388.892168] r592 0000:09:04.4: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 8388.892198] r592 0000:09:04.4: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
[ 8388.892208] r592 0000:09:04.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 8388.893061] PM: early resume of devices complete after 64.872 msecs
[ 8388.893191] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8388.893198] i915 0000:00:02.0: setting latency timer to 64
[ 8388.893283] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8388.893294] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8388.893370] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 8388.893461] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8388.893472] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8388.893507] usb usb2: root hub lost power or was reset
[ 8388.893529] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8388.893539] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8388.893571] usb usb3: root hub lost power or was reset
[ 8388.893591] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 8388.893601] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8388.893634] usb usb4: root hub lost power or was reset
[ 8388.893653] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8388.893664] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8388.893697] usb usb5: root hub lost power or was reset
[ 8388.893719] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 8388.893729] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8388.893779] pci 0000:00:1e.0: setting latency timer to 64
[ 8388.893796] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 8388.893801] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 8388.893808] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 8388.893813] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 8388.893820] ata_piix 0000:00:1f.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 8388.893828] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 8388.894962] sd 0:0:0:0: [sda] Starting disk
[ 8389.012124] PM: resume of drv:hub dev:4-0:1.0 complete after 117.332 msecs
[ 8389.012137] PM: resume of drv: dev:ep_00 complete after 117.300 msecs
[ 8389.012147] PM: resume of drv: dev:ep_81 complete after 117.334 msecs
[ 8389.012181] PM: resume of drv:hub dev:3-0:1.0 complete after 117.490 msecs
[ 8389.012193] PM: resume of drv: dev:ep_00 complete after 117.492 msecs
[ 8389.012202] PM: resume of drv: dev:ep_81 complete after 117.506 msecs
[ 8389.012235] PM: resume of drv:hub dev:2-0:1.0 complete after 117.572 msecs
[ 8389.012247] PM: resume of drv: dev:ep_00 complete after 117.572 msecs
[ 8389.012256] PM: resume of drv: dev:ep_81 complete after 117.588 msecs
[ 8389.015155] firewire_core: skipped bus generations, destroying all nodes
[ 8389.017104] PM: resume of drv:button dev:PNP0C0D:00 complete after 122.589 msecs
[ 8389.048203] PM: resume of drv:hub dev:1-0:1.0 complete after 153.565 msecs
[ 8389.048215] PM: resume of drv: dev:ep_00 complete after 153.567 msecs
[ 8389.048507] PM: resume of drv: dev:ep_81 complete after 153.864 msecs
[ 8389.079778] PM: resume of drv:i915 dev:0000:00:02.0 complete after 186.601 msecs
[ 8389.096534] PM: resume of drv:usb dev:1-8:1.0 complete after 201.139 msecs
[ 8389.096548] PM: resume of drv: dev:ep_00 complete after 201.079 msecs
[ 8389.096558] PM: resume of drv:usb dev:1-8:1.1 complete after 201.114 msecs
[ 8389.096566] PM: resume of drv: dev:ep_82 complete after 201.147 msecs
[ 8389.097009] PM: resume of drv: dev:ep_00 complete after 201.665 msecs
[ 8389.097018] PM: resume of drv:hub dev:1-6:1.0 complete after 201.725 msecs
[ 8389.097062] PM: resume of drv: dev:ep_81 complete after 201.743 msecs
[ 8389.116119] PM: resume of drv: dev:ep_00 complete after 221.174 msecs
[ 8389.116131] PM: resume of drv:hub dev:5-0:1.0 complete after 221.236 msecs
[ 8389.116146] PM: resume of drv: dev:ep_81 complete after 221.227 msecs
[ 8389.144765] PM: resume of drv:usb dev:1-6.2:1.3 complete after 248.693 msecs
[ 8389.144781] PM: resume of drv:btusb dev:1-6.2:1.0 complete after 249.031 msecs
[ 8389.144790] PM: resume of drv:usb dev:1-6.2:1.2 complete after 248.853 msecs
[ 8389.144802] PM: resume of drv:btusb dev:1-6.2:1.1 complete after 248.952 msecs
[ 8389.144813] PM: resume of drv: dev:ep_82 complete after 249.013 msecs
[ 8389.144819] PM: resume of drv: dev:ep_83 complete after 248.941 msecs
[ 8389.144823] PM: resume of drv: dev:ep_81 complete after 249.048 msecs
[ 8389.144829] PM: resume of drv: dev:ep_03 complete after 248.926 msecs
[ 8389.144834] PM: resume of drv: dev:ep_02 complete after 249.008 msecs
[ 8389.144849] PM: resume of drv: dev:ep_04 complete after 248.872 msecs
[ 8389.144856] PM: resume of drv: dev:ep_00 complete after 248.744 msecs
[ 8389.144862] PM: resume of drv: dev:ep_84 complete after 248.910 msecs
[ 8389.160111] usb 1-5: reset high-speed USB device number 2 using ehci_hcd
[ 8389.293857] PM: resume of drv: dev:ep_00 complete after 398.677 msecs
[ 8389.293867] PM: resume of drv:usb-storage dev:1-5:1.0 complete after 398.791 msecs
[ 8389.293885] PM: resume of drv: dev:ep_86 complete after 398.758 msecs
[ 8389.293894] PM: resume of drv: dev:ep_81 complete after 398.740 msecs
[ 8389.293914] PM: resume of drv: dev:ep_02 complete after 398.794 msecs
[ 8389.293909] PM: resume of drv:scsi dev:host2 complete after 398.705 msecs
[ 8389.293923] PM: resume of drv:scsi dev:target2:0:0 complete after 398.441 msecs
[ 8389.293941] PM: resume of drv:scsi_host dev:host2 complete after 398.699 msecs
[ 8389.293940] PM: resume of drv:sr dev:2:0:0:0 complete after 398.430 msecs
[ 8389.293986] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 398.439 msecs
[ 8389.404118] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[ 8389.512118] firewire_core: rediscovered device fw0
[ 8389.553949] PM: resume of drv: dev:ep_00 complete after 658.252 msecs
[ 8389.553959] PM: resume of drv:usb dev:5-1:1.0 complete after 658.361 msecs
[ 8389.553975] PM: resume of drv: dev:ep_02 complete after 658.328 msecs
[ 8389.553984] PM: resume of drv: dev:ep_83 complete after 658.313 msecs
[ 8389.553989] PM: resume of drv: dev:ep_81 complete after 658.365 msecs
[ 8390.068122] PM: resume of drv:tpm_tis dev:00:09 complete after 1042.329 msecs
[ 8391.017836] ata2: port disabled--ignoring
[ 8391.180516] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 8391.180522] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 8391.196643] ata1.00: configured for UDMA/100
[ 8391.200111] PM: resume of drv:sd dev:0:0:0:0 complete after 2305.134 msecs
[ 8391.200127] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2305.092 msecs
[ 8391.200134] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1127.636 msecs
[ 8391.340223] PM: resume of devices complete after 2447.082 msecs
[ 8391.340433] PM: resume devices took 2.448 seconds
[ 8391.340494] PM: Finishing wakeup.
[ 8391.340496] Restarting tasks ... done.
[ 8391.408432] video LNXVIDEO:00: Restoring backlight state
[ 8391.477209] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 8392.838700] sky2 0000:02:00.0: eth0: enabling interface
[ 8392.839789] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8393.092984] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8397.644927] wlan0: authenticate with f8:d1:11:22:b0:12 (try 1)
[ 8397.646658] wlan0: authenticated
[ 8397.665110] wlan0: associate with f8:d1:11:22:b0:12 (try 1)
[ 8397.669155] wlan0: RX AssocResp from f8:d1:11:22:b0:12 (capab=0x421 status=0 aid=2)
[ 8397.669166] wlan0: associated
[ 8397.708081] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8400.228187] iwl4965 0000:03:00.0: iwl4965_tx_agg_start on ra = f8:d1:11:22:b0:12 tid = 0
[ 8408.128062] wlan0: no IPv6 routers present
[ 8755.662936] iwl4965 0000:03:00.0: Aggregation not enabled for tid 6 because load = 1

and heres for "ls /dev/sd*
Code:
polako@polako-VGN-TZ45FN:~$ ls /dev/sd*
/dev/sda  /dev/sda1  /dev/sda2  /dev/sda5  /dev/sda6

markush 10-06-2012 02:06 AM
Hi,

it seems that the device is not recognized by the system. Did you have an SD-card inserted into the reader? You should try that.

If there's a card inserted, the output of "ls /dev/sd*" should show a device /dev/sdb and /dev/sdb? where ? is any digit.

Are you sure that the SD-reader is working at all? I would suppose that the kernel of Ubuntu 12.04 is recent enough in order to recognize such a device.

Markus

Polako 10-08-2012 01:49 PM
hi there, i had a sd card inserted in the drive, but it didn't recognize it at all, and it works. before i changed to ubuntu, it recognized it, now it has trouble.

thanks.


All times are GMT -5. The time now is 07:21 AM.