LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Wireless Networking (https://www.linuxquestions.org/questions/linux-wireless-networking-41/)
-   -   D-Link DWL-650 Rev p on Suse 9.1 personal (https://www.linuxquestions.org/questions/linux-wireless-networking-41/d-link-dwl-650-rev-p-on-suse-9-1-personal-232327/)

bschneider 09-18-2004 09:37 PM
D-Link DWL-650 Rev p on Suse 9.1 personal
 
I have read all of the threads about setting up a wireless card and several mention and discuss the dwl-650 but I haven't found one that addresses that card on a Suse system. I have tried all of the methods described in the current threads and none seem to work. I am using the standard suse kernel and have installed kernel sources with yast, but have not done make or config on the current installation. When I have tried that in the past I always wind up making my system inoperable and have to reload suse. If anyone could give me a hand with this I would really appreciate it. It is the only reason I am still using windows.

Thanks in advance
Brian Schneider

bschneider 10-08-2004 06:39 PM
Well, I hope that someone out there can tell me what the problem is and how to fix it. I have tried and I thought installed wlan-ng and had it working on my system, but it would never get an address from dhcp, but when I checked on the router's web configuration it did see the mac address of the wireless card and the card also said that it was connected, but could not get the network to go through it. Now after tinkering around, I still don't have any idea as to what is going on. Here is an output of what the boot msg is when it tries to install the card. There are two different versions. The second one is the latest one.
cardmgr[1796]: executing: './wlan-ng start wlan0 2>&1'

cardmgr[1796]: + FATAL: Module wlan0 not found.

cardmgr[1796]: + message=lnxreq_ifstate

cardmgr[1796]: + ifstate=fwload

cardmgr[1796]: + resultcode=success

cardmgr[1796]: + load_cardpda failed, exiting.

donecardmgr[1796]: + Unknown prism2 hardware type (), assuming SSF

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0003.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0005.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0006.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0007.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0008.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0402.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0403.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0404.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0408.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0001.

eth0 device: 3Com Corporation 3c556 Hurricane CardBus (rev 10)
eth0 configuration: eth-id-00:04:76:3f:c1:ce
cardmgr[1796]: + Processing PDR file: /tmp/prism2_ssf.pda

cardmgr[1796]: + Couldn't fetch PRI-SUP info

cardmgr[1796]: + Warning: RAM load only, PDA changes will NOT be written to flash.

cardmgr[1796]: + Reading S-record file /etc/wlan//prism2_pm.hex...

cardmgr[1796]: + NIC ID: 0 v0.0.0

cardmgr[1796]: + MFI ID: 0 v0 0->0

cardmgr[1796]: + CFI ID: 0 v0 0->0

cardmgr[1796]: + PRI ID: 0xc012 v0 0->0

cardmgr[1796]: + Version: ID 0x15 1.1.2

cardmgr[1796]: + Compat: Role 0 Id 0x3 v2 4->4

cardmgr[1796]: + Compat: Role 0x1 Id 0x2 v2 1->1

cardmgr[1796]: + Seq: 0

cardmgr[1796]: + Platform: ID 0x800e 1.0.0

cardmgr[1796]: + Platform: ID 0x8015 1.0.0

cardmgr[1796]: + Platform: ID 0x8019 1.0.0

cardmgr[1796]: + Platform: ID 0x801d 1.0.0

cardmgr[1796]: + Platform: ID 0x8024 1.0.0

cardmgr[1796]: + prism2dl: finished.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0005.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0402.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0403.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0404.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0408.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0406.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0303.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0413.

cardmgr[1796]: + prism2dl: warning: Failed to find PDR for plugrec 0x0414.

cardmgr[1796]: + Reading S-record file /etc/wlan//prism2_pm.hex...

cardmgr[1796]: + NIC ID: 0x801d v1.0.0

cardmgr[1796]: + MFI ID: 0x1 v1 1->1

cardmgr[1796]: + CFI ID: 0x2 v2 1->1

cardmgr[1796]: + PRI ID: 0x3 v1 4->4

cardmgr[1796]: + Version: ID 0x15 1.1.2

cardmgr[1796]: + Compat: Role 0 Id 0x3 v2 4->4

cardmgr[1796]: + Compat: Role 0x1 Id 0x2 v2 1->1

cardmgr[1796]: + Seq: 0

cardmgr[1796]: + Platform: ID 0x800e 1.0.0

cardmgr[1796]: + Platform: ID 0x8015 1.0.0

cardmgr[1796]: + Platform: ID 0x8019 1.0.0

cardmgr[1796]: + Platform: ID 0x801d 1.0.0

cardmgr[1796]: + Platform: ID 0x8024 1.0.0

cardmgr[1796]: + Reading S-record file /etc/wlan//prism2_rf.hex...

cardmgr[1796]: + NIC ID: 0x801d v1.0.0

cardmgr[1796]: + MFI ID: 0x1 v1 1->1

cardmgr[1796]: + CFI ID: 0x2 v2 1->1

cardmgr[1796]: + PRI ID: 0x3 v1 4->4

cardmgr[1796]: + Version: ID 0x1f 1.8.3

cardmgr[1796]: + Compat: Role 0 Id 0x4 v3 1->15

cardmgr[1796]: + Compat: Role 0x1 Id 0x1 v1 1->1

cardmgr[1796]: + Compat: Role 0x1 Id 0x2 v2 1->1

cardmgr[1796]: + Compat: Role 0x1 Id 0x3 v1 4->4

cardmgr[1796]: + Seq: 0

cardmgr[1796]: + Platform: ID 0x800a 1.0.0

cardmgr[1796]: + Platform: ID 0x800b 1.0.0

cardmgr[1796]: + Platform: ID 0x800c 1.0.0

cardmgr[1796]: + Platform: ID 0x800d 1.0.0

cardmgr[1796]: + Platform: ID 0x8012 1.0.0

cardmgr[1796]: + Platform: ID 0x8013 1.0.0

cardmgr[1796]: + Platform: ID 0x8014 1.0.0

cardmgr[1796]: + Platform: ID 0x8016 1.0.0

cardmgr[1796]: + Platform: ID 0x8017 1.0.0

cardmgr[1796]: + Platform: ID 0x8018 1.0.0

cardmgr[1796]: + Platform: ID 0x801a 1.0.0

cardmgr[1796]: + Platform: ID 0x801b 1.0.0

cardmgr[1796]: + Platform: ID 0x801c 1.0.0

cardmgr[1796]: + Platform: ID 0x8021 1.0.0

cardmgr[1796]: + Platform: ID 0x8022 1.0.0

cardmgr[1796]: + Platform: ID 0x8023 1.0.0

cardmgr[1796]: + Platform: ID 0x800a 1.0.0

cardmgr[1796]: + Platform: ID 0x800e 1.0.0

cardmgr[1796]: + Platform: ID 0x8015 1.0.0

cardmgr[1796]: + Platform: ID 0x8019 1.0.0

cardmgr[1796]: + Platform: ID 0x801d 1.0.0

cardmgr[1796]: + Platform: ID 0x8024 1.0.0

cardmgr[1796]: + prism2dl: finished.

eth0 (DHCP) . . . . . no IP address yet... backgrounding.
waiting
<notice>checkproc: /sbin/dhcpcd 2345
Waiting for mandatory devices: eth-id-00:04:76:3f:c1:ce
7 <notice>checkproc: /sbin/dhcpcd 2345
6 <notice>checkproc: /sbin/dhcpcd 2345
5 <notice>checkproc: /sbin/dhcpcd 2345
3 <notice>checkproc: /sbin/dhcpcd 2345
2 <notice>checkproc: /sbin/dhcpcd 2345
1 <notice>checkproc: /sbin/dhcpcd 2345
0 <notice>checkproc: /sbin/dhcpcd 2345

eth0 interface could not be set up
failedSetting up service network . . .

<notice>exit status of (coldplug) is (0)
<notice>start services (pcmcia)
Starting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 splash=silent sscripts=45 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
<notice>exit status of (pcmcia) is (0)
<notice>start services (network)
cardmgr[1779]: socket 0: D-Link DWL-650 rev P 802.11b WLAN card

Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
cardmgr[1779]: executing: './wlan-ng start wlan0 2>&1'

cardmgr[1779]: + FATAL: Module wlan0 not found.

cardmgr[1779]: + message=lnxreq_ifstate

cardmgr[1779]: + ifstate=fwload

cardmgr[1779]: + resultcode=success

donecardmgr[1779]: + load_cardpda failed, exiting.

cardmgr[1779]: + Unknown prism2 hardware type (), assuming SSF

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0003.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0005.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0006.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0007.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0008.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0402.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0403.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0404.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0408.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0001.

cardmgr[1779]: + prism2dl: writeimage()->xxxdl_state msg indicates failure, w/ resultcode=11, aborting download.

cardmgr[1779]: + prism2dl: Failed to ramwrite image data for /etc/wlan//prism2_pm.hex, exiting.

cardmgr[1779]: + Processing PDR file: /tmp/prism2_ssf.pda

cardmgr[1779]: + Couldn't fetch PRI-SUP info

cardmgr[1779]: + Warning: RAM load only, PDA changes will NOT be written to flash.

cardmgr[1779]: + Reading S-record file /etc/wlan//prism2_pm.hex...

cardmgr[1779]: + NIC ID: 0 v0.0.0

cardmgr[1779]: + MFI ID: 0 v0 0->0

cardmgr[1779]: + CFI ID: 0 v0 0->0

cardmgr[1779]: + PRI ID: 0 v0 0->0

cardmgr[1779]: + Version: ID 0x15 1.1.2

cardmgr[1779]: + Compat: Role 0 Id 0x3 v2 4->4

cardmgr[1779]: + Compat: Role 0x1 Id 0x2 v2 1->1

cardmgr[1779]: + Seq: 0

cardmgr[1779]: + Platform: ID 0x800e 1.0.0

cardmgr[1779]: + Platform: ID 0x8015 1.0.0

cardmgr[1779]: + Platform: ID 0x8019 1.0.0

cardmgr[1779]: + Platform: ID 0x801d 1.0.0

cardmgr[1779]: + Platform: ID 0x8024 1.0.0

cardmgr[1779]: + prism2dl: No such file or directory

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0003.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0005.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0006.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0007.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0008.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0400.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0402.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0403.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0404.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0408.

cardmgr[1779]: + prism2dl: warning: Failed to find PDR for plugrec 0x0001.

cardmgr[1779]: + prism2dl: writeimage()->xxxdl_state msg indicates failure, w/ resultcode=11, aborting download.

cardmgr[1779]: + prism2dl: Failed to ramwrite image data for /etc/wlan//prism2_pm.hex, exiting.

cardmgr[1779]: + Couldn't fetch PRI-SUP info

cardmgr[1779]: + Warning: RAM load only, PDA changes will NOT be written to flash.

cardmgr[1779]: + Reading S-record file /etc/wlan//prism2_pm.hex...

cardmgr[1779]: + NIC ID: 0 v0.0.0

cardmgr[1779]: + MFI ID: 0 v0 0->0

cardmgr[1779]: + CFI ID: 0 v0 0->0

cardmgr[1779]: + PRI ID: 0 v48580 52736->48516

cardmgr[1779]: + Version: ID 0x15 1.1.2

cardmgr[1779]: + Compat: Role 0 Id 0x3 v2 4->4

cardmgr[1779]: + Compat: Role 0x1 Id 0x2 v2 1->1

cardmgr[1779]: + Seq: 0

cardmgr[1779]: + Platform: ID 0x800e 1.0.0

cardmgr[1779]: + Platform: ID 0x8015 1.0.0

cardmgr[1779]: + Platform: ID 0x8019 1.0.0

cardmgr[1779]: + Platform: ID 0x801d 1.0.0

cardmgr[1779]: + Platform: ID 0x8024 1.0.0

cardmgr[1779]: + load_cardpda failed, exiting.

cardmgr[1779]: + Firmware failed to load for device wlan0

Waiting for mandatory devices: wlan0
13 12 10 6 5 4 2 1 0
wlan0 interface could not be set up
failedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>exit status of (network) is (7)

When I stat the wlan0 it states that it is there but there are no wireless extentions loaded. Please help me. I have been trying to get this working for quite sometime. I would really like to get this taken care of so I don't have to keep booting up into windows to use my laptop at home.

Thanks for the help
Brian Schneider


All times are GMT -5. The time now is 07:31 AM.