LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   ubuntu wireless issues (https://www.linuxquestions.org/questions/linux-newbie-8/ubuntu-wireless-issues-772558/)

gerryd 11-30-2009 09:05 PM
ubuntu wireless issues
 
i know this question has been asked to death around here, but i need a little help setting up my wireless. i just bought a compaq mini 110c, preloaded with xp. i set up a dual boot system with xp and ubuntu 9.10 netbook remix, and i can't seem to get the wireless up and running. some relevant information(i hope)
output for lspci:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
02:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
ifconfig -a:
Code:
eth0      Link encap:Ethernet  HWaddr 18:a9:05:91:48:e2 
          inet addr:10.105.130.70  Bcast:10.105.130.255  Mask:255.255.255.0
          inet6 addr: fe80::1aa9:5ff:fe91:48e2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4405 errors:96 dropped:0 overruns:0 frame:91
          TX packets:2774 errors:4 dropped:0 overruns:0 carrier:5
          collisions:257 txqueuelen:1000
          RX bytes:2587252 (2.5 MB)  TX bytes:421309 (421.3 KB)
          Interrupt:27

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:480 (480.0 B)  TX bytes:480 (480.0 B)
and i got these 2 drivers, they were suggest by the system:
Broadcom STA wireless driver (not activated)
and B54 i think, i can't find it and i think it's probably the one currently active.
i would appreciate any help, thank you.

mrmnemo 11-30-2009 09:29 PM
hi>
ok so your issue is actuallya common with ralink and broadcom. your card does not appear to have the firmware. the easiest way to show you is to give you two(2) links one is on the UBUNTO bug page( google is your friend)
@

http://linuxwireless.org/en/use

next to the fix
@

http://linuxwireless.org/en/users/Drivers/b43

hope this helps. if not let me know and i will try to take you the rest of the way.

gerryd 11-30-2009 09:31 PM
thank you for the response. i'll read through those links now and hopefully get it taken care of.

mrmnemo 11-30-2009 10:03 PM
i'll check back in later tonight to see if ya got it fixed. good luck.

gerryd 11-30-2009 10:06 PM
thank you for the help, i got it fixed. i went with the broadcom sta wireless driver. for some reason when i downloaded it didn't set itself up properly. i removed it and installed it again. lazy solution, but save the hard fixes for my slackbox.


All times are GMT -5. The time now is 05:56 AM.