LinuxQuestions.org - PCMCIA Ethernet Card not recoginized

OK, thanks. How do I disable M$ in the bios? Here's my output from dmesg:

[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040e5800 (usable)
[ 0.000000] BIOS-e820: 00000000040e5800 - 00000000040efc00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040efc00 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000ffff0800 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.1 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000040e5800 (usable)
[ 0.000000] modified: 00000000040e5800 - 00000000040efc00 (ACPI data)
[ 0.000000] modified: 00000000040efc00 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] modified: 00000000040ffc00 - 0000000010000000 (usable)
[ 0.000000] modified: 00000000ffff0800 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 10000000 @ 10000-15000
[ 0.000000] RAMDISK: 039a2000 - 040d4f80
[ 0.000000] ACPI: RSDP 000F66F0, 0014 (r0 HP-MCD)
[ 0.000000] ACPI: RSDT 040E5A51, 0028 (r1 HP-MCD CI RSDT 7130000 PTL 1000000)
[ 0.000000] ACPI: FACP 040EFB8C, 0074 (r1 HP-MCD CI FACP 7130000 HP 1000000)
[ 0.000000] ACPI: DSDT 040E5A79, A113 (r1 HP-MCD CI DSDT 7130000 MSFT 100000C)
[ 0.000000] ACPI: FACS 040FFBC0, 0040
[ 0.000000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 00000000 - 10000000
[ 0.000000] bootmap 00011000 - 00013000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [00039a2000 - 00040d4f80] RAMDISK ==> [00039a2000 - 00040d4f80]
[ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem 0x00010000 -> 0x00010000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000040e5
[ 0.000000] 0: 0x00004100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65396
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60933 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f1000
[ 0.000000] PM: Registered nosave memory: 00000000000f1000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000040e5000 - 00000000040e6000
[ 0.000000] PM: Registered nosave memory: 00000000040e6000 - 00000000040ef000
[ 0.000000] PM: Registered nosave memory: 00000000040ef000 - 00000000040f0000
[ 0.000000] PM: Registered nosave memory: 00000000040f0000 - 00000000040ff000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0800)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64884
[ 0.000000] Kernel command line: root=UUID=5f47842a-ba9d-4d0e-b9c7-bdea05453506 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] TSC: Using PIT calibration value
[ 0.000000] Detected 363.940 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] allocated 1310400 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 242592k/262144k available (4126k kernel code, 18668k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004038] Calibrating delay loop (skipped), value calculated using timer frequency.. 727.88 BogoMIPS (lpj=1455760)
[ 0.004140] Security Framework initialized
[ 0.004181] SELinux: Disabled at boot.
[ 0.004293] AppArmor: AppArmor initialized
[ 0.004341] Mount-cache hash table entries: 512
[ 0.005015] Initializing cgroup subsys ns
[ 0.005037] Initializing cgroup subsys cpuacct
[ 0.005054] Initializing cgroup subsys memory
[ 0.005077] Initializing cgroup subsys freezer
[ 0.005149] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.005168] CPU: L2 cache: 256K
[ 0.005248] Checking 'hlt' instruction... OK.
[ 0.020317] SMP alternatives: switching to UP code
[ 0.715402] Freeing SMP alternatives: 18k freed
[ 0.716380] weird, boot CPU (#0) not listedby the BIOS.
[ 0.716395] SMP motherboard not detected.
[ 0.716412] Local APIC not detected. Using dummy APIC emulation.
[ 0.716424] SMP disabled
[ 0.718506] Brought up 1 CPUs
[ 0.718531] Total of 1 processors activated (727.88 BogoMIPS).
[ 0.718624] CPU0 attaching NULL sched-domain.
[ 0.720408] net_namespace: 776 bytes
[ 0.720471] Booting paravirtualized kernel on bare hardware
[ 0.721994] Time: 16:43:45 Date: 09/08/09
[ 0.722026] regulator: core version 0.5
[ 0.722231] NET: Registered protocol family 16
[ 0.723033] EISA bus registered
[ 0.724411] PCI: PCI BIOS revision 2.10 entry at 0xfd9db, last bus=1
[ 0.724430] PCI: Using configuration type 1 for base access
[ 0.732148] ACPI: Interpreter disabled.
[ 0.733172] SCSI subsystem initialized
[ 0.733478] libata version 3.00 loaded.
[ 0.733819] usbcore: registered new interface driver usbfs
[ 0.733924] usbcore: registered new interface driver hub
[ 0.734134] usbcore: registered new device driver usb
[ 0.734935] PCI: Probing PCI hardware
[ 0.734953] PCI: Probing PCI hardware (bus 00)
[ 0.735153] pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x3ffffff]
[ 0.735353] pci 0000:00:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.735385] pci 0000:00:04.0: supports D1 D2
[ 0.735401] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.735420] pci 0000:00:04.0: PME# disabled
[ 0.735495] pci 0000:00:04.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.735526] pci 0000:00:04.1: supports D1 D2
[ 0.735539] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.735557] pci 0000:00:04.1: PME# disabled
[ 0.735772] pci 0000:00:07.1: reg 20 io port: [0xfcf0-0xfcff]
[ 0.735893] pci 0000:00:07.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 0.736101] pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[ 0.736123] pci 0000:00:07.3: quirk: region 2180-218f claimed by PIIX4 SMB
[ 0.736144] pci 0000:00:07.3: PIIX4 devres B PIO at 0530-0537
[ 0.736160] pci 0000:00:07.3: PIIX4 devres C PIO at 0388-038f
[ 0.736177] pci 0000:00:07.3: PIIX4 devres E PIO at 0120-0121
[ 0.736334] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.736361] pci 0000:01:00.0: reg 14 32bit mmio: [0xfe800000-0xfebfffff]
[ 0.736386] pci 0000:01:00.0: reg 18 32bit mmio: [0xfec00000-0xfecfffff]
[ 0.736446] pci 0000:01:00.0: supports D1 D2
[ 0.736519] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe000000-0xfe3fffff]
[ 0.736544] pci 0000:01:00.1: reg 14 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.736702] pci 0000:00:01.0: bridge 32bit mmio: [0xfe700000-0xfecfffff]
[ 0.736724] pci 0000:00:01.0: bridge 32bit mmio pref: [0xfd000000-0xfe3fffff]
[ 0.738499] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
[ 0.738565] PCI: setting IRQ 10 as level-triggered
[ 0.738583] pci 0000:00:04.0: found PCI INT A -> IRQ 10
[ 0.738653] pci 0000:00:04.1: found PCI INT B -> IRQ 10
[ 0.738711] pci 0000:00:04.1: sharing IRQ 10 with 0000:01:00.1
[ 0.739108] Bluetooth: Core ver 2.13
[ 0.739108] NET: Registered protocol family 31
[ 0.739108] Bluetooth: HCI device and connection manager initialized
[ 0.739108] Bluetooth: HCI socket layer initialized
[ 0.739108] NET: Registered protocol family 8
[ 0.739108] NET: Registered protocol family 20
[ 0.739108] NetLabel: Initializing
[ 0.739108] NetLabel: domain hash size = 128
[ 0.739108] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.739108] NetLabel: unlabeled traffic allowed by default
[ 0.740384] AppArmor: AppArmor Filesystem Enabled
[ 0.740400] pnp: PnP ACPI: disabled
[ 0.740421] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.740502] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6760
[ 0.740520] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xac12, dseg 0x400
[ 0.742843] pnp 00:05: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.742868] pnp 00:05: mem resource (0xd8000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.742890] pnp 00:05: mem resource (0x100000-0xfffffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.785279] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[ 0.785347] system 00:04: ioport range 0x401-0x407 has been reserved
[ 0.785371] system 00:04: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.785431] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.785449] system 00:0a: ioport range 0x8000-0x803f has been reserved
[ 0.785467] system 00:0a: ioport range 0x2180-0x218f has been reserved
[ 0.786702] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.786719] pci 0000:00:01.0: IO window: disabled
[ 0.786739] pci 0000:00:01.0: MEM window: 0xfe700000-0xfecfffff
[ 0.786759] pci 0000:00:01.0: PREFETCH window: 0x000000fd000000-0x000000fe3fffff
[ 0.786785] pci 0000:00:04.0: CardBus bridge, secondary bus 0000:02
[ 0.786801] pci 0000:00:04.0: IO window: 0x001000-0x0010ff
[ 0.786819] pci 0000:00:04.0: IO window: 0x001400-0x0014ff
[ 0.786838] pci 0000:00:04.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.786857] pci 0000:00:04.0: MEM window: 0x24000000-0x27ffffff
[ 0.786876] pci 0000:00:04.1: CardBus bridge, secondary bus 0000:06
[ 0.786890] pci 0000:00:04.1: IO window: 0x001800-0x0018ff
[ 0.786908] pci 0000:00:04.1: IO window: 0x001c00-0x001cff
[ 0.786926] pci 0000:00:04.1: PREFETCH window: 0x28000000-0x2bffffff
[ 0.786945] pci 0000:00:04.1: MEM window: 0x2c000000-0x2fffffff
[ 0.787002] pci 0000:00:04.0: found PCI INT A -> IRQ 10
[ 0.787085] pci 0000:00:04.1: found PCI INT B -> IRQ 10
[ 0.787144] pci 0000:00:04.1: sharing IRQ 10 with 0000:01:00.1
[ 0.787170] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.787184] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.787198] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.787212] bus: 01 index 1 mmio: [0xfe700000-0xfecfffff]
[ 0.787226] bus: 01 index 2 mmio: [0xfd000000-0xfe3fffff]
[ 0.787239] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.787253] bus: 02 index 0 io port: [0x1000-0x10ff]
[ 0.787266] bus: 02 index 1 io port: [0x1400-0x14ff]
[ 0.787280] bus: 02 index 2 mmio: [0x20000000-0x23ffffff]
[ 0.787295] bus: 02 index 3 mmio: [0x24000000-0x27ffffff]
[ 0.787309] bus: 06 index 0 io port: [0x1800-0x18ff]
[ 0.787323] bus: 06 index 1 io port: [0x1c00-0x1cff]
[ 0.787337] bus: 06 index 2 mmio: [0x28000000-0x2bffffff]
[ 0.787351] bus: 06 index 3 mmio: [0x2c000000-0x2fffffff]
[ 0.787406] NET: Registered protocol family 2
[ 0.788268] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.789827] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.790158] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.790477] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.790493] TCP reno registered
[ 0.791062] NET: Registered protocol family 1
[ 0.791807] checking if image is initramfs... it is
[ 4.364409] Freeing initrd memory: 7371k freed
[ 4.364766] cpufreq: No nForce2 chipset.
[ 4.365437] audit: initializing netlink socket (disabled)
[ 4.365521] type=2000 audit(1252428228.364:1): initialized
[ 4.411558] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 4.420884] VFS: Disk quotas dquot_6.5.1
[ 4.421324] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.425830] fuse init (API version 7.10)
[ 4.426441] msgmni has been set to 488
[ 4.427735] alg: No test for stdrng (krng)
[ 4.427834] io scheduler noop registered
[ 4.427849] io scheduler anticipatory registered
[ 4.427862] io scheduler deadline registered
[ 4.428024] io scheduler cfq registered (default)
[ 4.428097] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 4.428189] pci 0000:01:00.0: Boot video device
[ 4.428804] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.428866] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.430004] isapnp: Scanning for PnP cards...
[ 4.783303] isapnp: No Plug & Play device found
[ 4.790958] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 4.791201] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.793082] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.798200] brd: module loaded
[ 4.800392] loop: module loaded
[ 4.800980] Fixed MDIO Bus: probed
[ 4.801020] PPP generic driver version 2.4.2
[ 4.801396] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 4.801596] Driver 'sd' needs updating - please use bus_type methods
[ 4.801659] Driver 'sr' needs updating - please use bus_type methods
[ 4.802084] ata_piix 0000:00:07.1: version 2.12
[ 4.802878] scsi0 : ata_piix
[ 4.803568] scsi1 : ata_piix
[ 4.803791] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
[ 4.803810] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
[ 5.302587] ata1.00: ATA-4: IBM-DCXA-210000, CX6OA87F, max UDMA/33
[ 5.302606] ata1.00: 19640880 sectors, multi 16: LBA
[ 5.345421] ata1.00: configured for UDMA/33
[ 5.501093] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2202, 1R13, max UDMA/33
[ 5.501985] ata2.00: configured for UDMA/33
[ 5.502881] scsi 0:0:0:0: Direct-Access ATA IBM-DCXA-210000 CX6O PQ: 0 ANSI: 5
[ 5.503569] sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors: (10.0 GB/9.36 GiB)
[ 5.503702] sd 0:0:0:0: [sda] Write Protect is off
[ 5.503720] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.503939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.504376] sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors: (10.0 GB/9.36 GiB)
[ 5.504500] sd 0:0:0:0: [sda] Write Protect is off
[ 5.504561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.504781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.504810] sda: sda1 sda2 < sda5 >
[ 5.610412] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.610735] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.611753] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2202 1R13 PQ: 0 ANSI: 5
[ 5.614851] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 5.614871] Uniform CD-ROM driver Revision: 3.20
[ 5.615494] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.615818] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.619563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.619681] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.619795] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.620016] uhci_hcd 0000:00:07.2: enabling device (0000 -> 0001)
[ 5.620051] uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 10
[ 5.620147] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 5.620595] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 5.620676] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000fcc0
[ 5.621298] usb usb1: configuration #1 chosen from 1 choice
[ 5.621482] hub 1-0:1.0: USB hub found
[ 5.621545] hub 1-0:1.0: 2 ports detected
[ 5.622342] usbcore: registered new interface driver libusual
[ 5.622537] usbcore: registered new interface driver usbserial
[ 5.622606] USB Serial support registered for generic
[ 5.622688] usbcore: registered new interface driver usbserial_generic
[ 5.622704] usbserial: USB Serial Driver core
[ 5.623018] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 5.636617] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.636653] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.637361] mice: PS/2 mouse device common for all mice
[ 5.637922] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.637980] rtc0: alarms up to one day, 114 bytes nvram
[ 5.638505] device-mapper: uevent: version 1.0.3
[ 5.639247] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.639633] device-mapper: multipath: version 1.0.5 loaded
[ 5.639652] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.640287] EISA: Probing bus 0 at eisa.0
[ 5.640319] Cannot allocate resource for EISA slot 1
[ 5.640376] Cannot allocate resource for EISA slot 8
[ 5.640389] EISA: Detected 0 cards.
[ 5.640646] cpuidle: using governor ladder
[ 5.640662] cpuidle: using governor menu
[ 5.644272] TCP cubic registered
[ 5.645148] NET: Registered protocol family 10
[ 5.647917] lo: Disabled Privacy Extensions
[ 5.650159] NET: Registered protocol family 17
[ 5.650297] Bluetooth: L2CAP ver 2.11
[ 5.650311] Bluetooth: L2CAP socket layer initialized
[ 5.650330] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.650342] Bluetooth: SCO socket layer initialized
[ 5.650617] Bluetooth: RFCOMM socket layer initialized
[ 5.650666] Bluetooth: RFCOMM TTY layer initialized
[ 5.650679] Bluetooth: RFCOMM ver 1.10
[ 5.650899] IO APIC resources could be not be allocated.
[ 5.650974] Using IPI No-Shortcut mode
[ 5.651469] registered taskstats version 1
[ 5.651977] Magic number: 9:1:742
[ 5.652192] rtc_cmos 00:03: setting system clock to 2009-09-08 16:43:50 UTC (1252428230)
[ 5.652213] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.652226] EDD information not available.
[ 5.656052] Freeing unused kernel memory: 532k freed
[ 5.656948] Write protecting the kernel text: 4128k
[ 5.657196] Write protecting the kernel read-only data: 1532k
[ 5.677018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.932727] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 6.100347] usb 1-1: configuration #1 chosen from 1 choice
[ 6.152004] Initializing USB Mass Storage driver...
[ 6.152739] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6.160255] usbcore: registered new interface driver usb-storage
[ 6.160284] USB Mass Storage support registered.
[ 6.160935] usb-storage: device found at 2
[ 6.160950] usb-storage: waiting for device to settle before scanning
[ 9.605962] PM: Starting manual resume from disk
[ 9.605989] PM: Resume from partition 8:5
[ 9.606001] PM: Checking hibernation image.
[ 9.606571] PM: Resume from disk failed.
[ 9.669717] kjournald starting. Commit interval 5 seconds
[ 9.669789] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.164698] usb-storage: device scan complete
[ 11.170258] scsi 2:0:0:0: Direct-Access IBM Memory Key 3.52 PQ: 0 ANSI: 0 CCS
[ 11.188851] sd 2:0:0:0: [sdb] 499712 512-byte hardware sectors: (255 MB/244 MiB)
[ 11.192492] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.192518] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 11.192560] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.206225] sd 2:0:0:0: [sdb] 499712 512-byte hardware sectors: (255 MB/244 MiB)
[ 11.209470] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.209489] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 11.209521] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.209702] sdb: sdb1
[ 11.224963] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.226806] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 24.256074] udev: starting version 141
[ 25.370933] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.608278] Linux agpgart interface v0.103
[ 25.706732] yenta_cardbus 0000:00:04.0: CardBus bridge found [103c:0007]
[ 25.706861] yenta_cardbus 0000:00:04.0: Enabling burst memory read transactions
[ 25.706887] yenta_cardbus 0000:00:04.0: Using CSCINT to route CSC interrupts to PCI
[ 25.706903] yenta_cardbus 0000:00:04.0: Routing CardBus interrupts to PCI
[ 25.706925] yenta_cardbus 0000:00:04.0: TI: mfunc 0x01021c02, devctl 0x66
[ 25.958007] yenta_cardbus 0000:00:04.0: ISA IRQ mask 0x0898, PCI irq 10
[ 25.958033] yenta_cardbus 0000:00:04.0: Socket status: 30000010
[ 25.977958] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x2180, revision 0
[ 25.978791] yenta_cardbus 0000:00:04.1: CardBus bridge found [103c:0007]
[ 25.979051] yenta_cardbus 0000:00:04.1: Using CSCINT to route CSC interrupts to PCI
[ 25.979070] yenta_cardbus 0000:00:04.1: Routing CardBus interrupts to PCI
[ 25.979092] yenta_cardbus 0000:00:04.1: TI: mfunc 0x01021c02, devctl 0x66
[ 26.003468] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 26.227359] yenta_cardbus 0000:00:04.1: ISA IRQ mask 0x0898, PCI irq 10
[ 26.227392] yenta_cardbus 0000:00:04.1: Socket status: 30000006
[ 26.326378] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 26.345845] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x34000000
[ 26.631041] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 26.769049] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 27.350671] psmouse serio1: ID: 10 00 64<6>IBM TrackPoint firmware: 0x0b, buttons: 3/3
[ 27.828179] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
[ 28.725425] nm256: The device is blacklisted. Loading stopped
[ 29.152094] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x120-0x127 0x220-0x22f 0x378-0x37f 0x388-0x38f
[ 29.153443] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 29.154137] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 29.154784] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 29.156272] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 29.601295] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x120-0x127 0x220-0x22f 0x378-0x37f 0x388-0x38f
[ 29.602647] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 29.603416] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 29.604060] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 29.605505] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 29.606212] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 29.613815] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 29.781792] pcmcia 0.0: firmware: requesting 3CCFEM556.cis
[ 29.850955] pcmcia 0.0: firmware: requesting 3CCFEM556.cis
[ 30.556010] lp: driver loaded but no devices found
[ 31.078810] Adding 465844k swap on /dev/sda5. Priority:-1 extents:1 across:465844k
[ 32.146875] EXT3 FS on sda1, internal journal
[ 35.215925] type=1505 audit(1252428260.059:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1703
[ 35.590939] type=1505 audit(1252428260.435:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1707
[ 35.592213] type=1505 audit(1252428260.439:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1707
[ 35.592689] type=1505 audit(1252428260.439:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1707
[ 35.593066] type=1505 audit(1252428260.439:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1707
[ 36.666939] type=1505 audit(1252428261.511:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1712
[ 36.668674] type=1505 audit(1252428261.515:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1712
[ 36.886581] type=1505 audit(1252428261.731:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1716
[ 46.861668] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 46.861690] Bluetooth: BNEP filters: protocol multicast
[ 47.059052] Bridge firewalling registered
[ 50.666687] ppdev: user-space parallel port driver
[ 1916.465309] usb 1-1: USB disconnect, address 2
[ 1916.471908] Buffer I/O error on device sdb1, logical block 489
[ 1916.471934] lost page write due to I/O error on sdb1
[ 1916.761480] scsi 2:0:0:0: rejecting I/O to dead device
[ 1943.920618] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 2837.611755] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 2837.612003] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 2837.612362] pcmcia 0.0: firmware: requesting 3CCFEM556.cis
[ 2837.687853] pcmcia 0.0: firmware: requesting 3CCFEM556.cis
jimtino@jimtino-laptop:~$

Thanks so much for hanging with me on this one Drakeo. Here is the output from lspci, lsmod, ifconfig, and another dmesg dump.

Jim

*** LSPCI ***
root@jimtino-laptop:/home/jimtino# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:04.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)
00:04.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 12)
01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 12)

*** LSMOD ***

root@jimtino-laptop:/home/jimtino# lsmod
Module Size Used by
nls_iso8859_1 12032 1
nls_cp437 13696 1
vfat 18816 1
fat 58272 1 vfat
binfmt_misc 16776 1
ppdev 15620 0
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
lp 17156 0
parport 42220 2 ppdev,lp
3c574_cs 19720 0
pcmcia 44748 1 3c574_cs
snd_nm256 74144 0
snd_ac97_codec 112292 1 snd_nm256
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 3 snd_nm256,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 16904 1 snd_pcm

**** ifconfig eth0 up *****

root@jimtino-laptop:/home/jimtino# ifconfig eth0 up
eth0: ERROR while getting interface flags: No such device
root@jimtino-laptop:/home/jimtino#

*** DMESG ***

ting system clock to 2009-09-12 15:28:30 UTC (1252769310)
[ 5.968984] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.968997] EDD information not available.
[ 5.972896] Freeing unused kernel memory: 532k freed
[ 5.973675] Write protecting the kernel text: 4128k
[ 5.973919] Write protecting the kernel read-only data: 1532k
[ 5.993461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 6.248956] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 6.415402] usb 1-1: configuration #1 chosen from 1 choice
[ 6.467028] Initializing USB Mass Storage driver...
[ 6.467694] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6.475160] usbcore: registered new interface driver usb-storage
[ 6.475190] USB Mass Storage support registered.
[ 6.475762] usb-storage: device found at 2
[ 6.475776] usb-storage: waiting for device to settle before scanning
[ 9.846366] PM: Starting manual resume from disk
[ 9.846391] PM: Resume from partition 8:5
[ 9.846402] PM: Checking hibernation image.
[ 9.847056] PM: Resume from disk failed.
[ 9.910102] kjournald starting. Commit interval 5 seconds
[ 9.910176] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.477138] usb-storage: device scan complete
[ 11.494231] scsi 2:0:0:0: Direct-Access IBM Memory Key 3.52 PQ: 0 ANSI: 0 CCS
[ 11.518598] sd 2:0:0:0: [sdb] 499712 512-byte hardware sectors: (255 MB/244 MiB)
[ 11.521457] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.521479] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 11.521504] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.543816] sd 2:0:0:0: [sdb] 499712 512-byte hardware sectors: (255 MB/244 MiB)
[ 11.546487] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.546513] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 11.546535] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.546642] sdb: sdb1
[ 11.561996] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.563374] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 24.355810] udev: starting version 141
[ 24.929088] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.114200] Linux agpgart interface v0.103
[ 25.551912] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x2180, revision 0
[ 25.648929] yenta_cardbus 0000:00:04.0: CardBus bridge found [103c:0007]
[ 25.648980] yenta_cardbus 0000:00:04.0: Enabling burst memory read transactions
[ 25.649001] yenta_cardbus 0000:00:04.0: Using CSCINT to route CSC interrupts to PCI
[ 25.649017] yenta_cardbus 0000:00:04.0: Routing CardBus interrupts to PCI
[ 25.649038] yenta_cardbus 0000:00:04.0: TI: mfunc 0x01021c02, devctl 0x66
[ 25.883165] yenta_cardbus 0000:00:04.0: ISA IRQ mask 0x0898, PCI irq 10
[ 25.883194] yenta_cardbus 0000:00:04.0: Socket status: 30000010
[ 25.918964] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 25.929245] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x34000000
[ 25.929482] yenta_cardbus 0000:00:04.1: CardBus bridge found [103c:0007]
[ 25.929526] yenta_cardbus 0000:00:04.1: Using CSCINT to route CSC interrupts to PCI
[ 25.929542] yenta_cardbus 0000:00:04.1: Routing CardBus interrupts to PCI
[ 25.929563] yenta_cardbus 0000:00:04.1: TI: mfunc 0x01021c02, devctl 0x66
[ 26.046689] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 26.187522] yenta_cardbus 0000:00:04.1: ISA IRQ mask 0x0898, PCI irq 10
[ 26.187549] yenta_cardbus 0000:00:04.1: Socket status: 30000006
[ 26.584317] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 26.636817] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 26.856192] psmouse serio1: ID: 10 00 64<6>IBM TrackPoint firmware: 0x0b, buttons: 3/3
[ 27.354423] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
[ 28.627794] nm256: The device is blacklisted. Loading stopped
[ 29.252726] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x120-0x127 0x220-0x22f 0x378-0x37f 0x388-0x38f
[ 29.254085] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 29.254782] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 29.255430] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 29.257201] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 29.706374] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x120-0x127 0x220-0x22f 0x378-0x37f 0x388-0x38f
[ 29.707740] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 29.708520] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 29.709171] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 29.710639] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 29.711352] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 29.718986] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 29.896276] pcmcia 0.0: firmware: requesting 3CCFEM556.cis
[ 29.965813] pcmcia 0.0: firmware: requesting 3CCFEM556.cis
[ 30.670823] lp: driver loaded but no devices found
[ 31.198490] Adding 465844k swap on /dev/sda5. Priority:-1 extents:1 across:465844k
[ 32.224941] EXT3 FS on sda1, internal journal
[ 35.402366] type=1505 audit(1252769339.932:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1705
[ 35.777107] type=1505 audit(1252769340.304:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1709
[ 35.778651] type=1505 audit(1252769340.308:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1709
[ 35.779117] type=1505 audit(1252769340.308:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1709
[ 35.779516] type=1505 audit(1252769340.308:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1709
[ 36.851856] type=1505 audit(1252769341.380:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1714
[ 36.853632] type=1505 audit(1252769341.384:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1714
[ 37.071737] type=1505 audit(1252769341.600:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1718
[ 47.103147] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.103167] Bluetooth: BNEP filters: protocol multicast
[ 47.293760] Bridge firewalling registered
[ 50.410050] ppdev: user-space parallel port driver
[ 1464.359313] usb 1-1: USB disconnect, address 2
[ 1464.646214] scsi 2:0:0:0: rejecting I/O to dead device
[ 1701.490101] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 1701.715542] usb 1-1: configuration #1 chosen from 1 choice
[ 1701.759456] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1701.760802] usb-storage: device found at 3
[ 1701.760817] usb-storage: waiting for device to settle before scanning
[ 1706.762472] usb-storage: device scan complete
[ 1706.775130] scsi 3:0:0:0: Direct-Access IBM Memory Key 3.52 PQ: 0 ANSI: 0 CCS
[ 1706.817282] sd 3:0:0:0: [sdb] 499712 512-byte hardware sectors: (255 MB/244 MiB)
[ 1706.827949] sd 3:0:0:0: [sdb] Write Protect is off
[ 1706.828038] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1706.828077] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1706.849490] sd 3:0:0:0: [sdb] 499712 512-byte hardware sectors: (255 MB/244 MiB)
[ 1706.857580] sd 3:0:0:0: [sdb] Write Protect is off
[ 1706.857604] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1706.857736] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1706.858024] sdb: sdb1
[ 1706.932062] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1706.933780] sd 3:0:0:0: Attached scsi generic sg2 type 0
root@jimtino-laptop:/home/jimtino#