I dont even know what my problem is?!
 

Okay I'm as new as they get so if this has some answer that I could have found by doing some detailed search I apologize for wasting your time with this. Here it goes:

Background:
I just installed red hat linux 9. When I tried to do the graphical user installation the monitor went blank. I rebooted and was successful to install it with the text installation. It detected my monitor and video card, a ViewSonic VX900 and a Gefroce4 respectivly. This is what I chose for those options...for the monitor settings I chose 1280x1024 and I had no idea what the refresh rate settings were supposed to be so I left it at what it said.

I can now pick either Linux or Windows XP. WinXP works fine. When I select Red Hat Linux it boots up and the monitor goes blank. I can hit a button to go into a text mode for grub but this is different than actually being in linux at least I believe.

Question:
What do you think my problem is? Is it that I need to install a driver for the Geforce4? If so point me in the right direction. I cant even get into the linux OS at all...any idea on how I can do that, even a non graphical text mode?

Try passing "vga = normal" as an option in grub.

Here's another possibility to look into:

http://forums.devshed.com/archive/33/2003/8/3/77098

status...
 

I tried the first suggestion it was an unrecognized command...Im working on the second...how to i set to the runlevel to 3 before i reboot? the man command and the help command dont seem to come up with anything.

In the grub menu where you can select between Windows and Linux, highlight linux and hit "e", this will let you edit the command to boot. Now, select the entry that starts with "kernel" and hit "e" again. You are now able to edit the line. Add "init 3" to the end of the line, hit "enter" to return to the previous screen. Hit "b" to boot linux.

You don't have to do anything if you failed to boot this way, or when you want to boot with your normal runlevel again becoz this only temporarily changes your runlevel to 3. Just reboot your computer if anything weird happens.

status...
 

Excellent I can get into linux. woot! Now am I correct to assume that the reason I cannot see in the graphical linux is because I need to get a driver for my GeForce4 ti 4600? That is my guess, which leads into my next question. Is this the site that has the appropriate driver...

http://www.nvidia.com/object/linux_d..._1.0-4363.html

If No where do I go from here so I can see something? If yes do I then download this file and put it on a floppy, to be installed off of the floppy in the text linux? Once again what are the exact commands I need to type? Any help is greatly appreciated I'm excited about getting my first linux installation working, so far you have all been a great help.

I hope somebody stops me if I'm giving you bad advice. I have not done this myself, so be warned! That seems to be the site and the installer seems to be the file

NVIDIA-Linux-x86-1.0-4363.run

There is also a huge README (2Mb/100+pages PDF) which might be worth glancing through. Anyway, it seems you have to get this installer file on your linux PC. This may be a bit of a problem, as it is 6.3Mb.

Does your linux PC dual boot to MSwin? If so you download in MSwin, reboot and copy to linux.

Alternatively there might be some MSwin utility that chops files into floppy size pieces, which linux can recombine.

Several more extreme measures occur to me, but maybe you have some suggestion yourself based on your setup.

Anyway, once you have the file you 'run it' (or rather get the shell to execute it) by logging in as root and doing

# sh NVIDIA-Linux-x86-1.0-4363.run

Maybe you then have to run xf86config, or maybe the installer takes care of setting up your config files. The docs or install messages should tell you (let's hope so anyway).

you should also be able to grab the file from within Linux using "wget" - iirc RH includes it - after logging in type "wget" followed by the entire filename.

you can read more about it by typing "man wget" at the prompt.

you may also have to make some config file changes, but I'm not sure - there are a lot of threads around on installing the nvidia drivers, and a good site/forum for nvidia help (along with this one, of course :D) is nvnews.net

:cool:

another status...
 

Okay I managed to install a new driver for the video card. I found out there is another new one, so I'll install that after I finish this post. I still dont know how to enter any sort of setup for XF86 typing xf86config doesnt do anything. When I try to start the full blown XFree86 (I think thats the graphical enviornment red hat 9 uses) the screen simply goes blank again. Does anyone know why I cant get my screen to display anything and possibly how to fix it?

You should have a file called /etc/X11/XF86Config-4 (or something very similar). What does the section labelled "Device" say?

In directory /usr/X11R6/bin do you have any files called xf86config or xf86cfg, or something like that?

Anyone know the standard way to configure XFree86 in RH9?

Or perhaps you have set your screen resolution improperly? You can change resolution setting by editting the file /etc/X11/XF86Config (or XF86Config-4). Try drop it to 800 x 600 to make sure whether is this the cause to your problem.

more stuff
 

So I figured managed to open the xf86config file. However, there does not appear to be a setting for the resolution that is selected. Do you know what I should look for? I also found this:

http://www.xfree86.org/current/XF86Config.5.html

It was of some help but without a side by side comparison not all that helpful. I'll try to copy my config file to disk so I can post it later tonight but right now I have to do some diffeq homework...

The odd thing is that it did list 1280x1024 as a supported resolution and i KNOW that that is what I selected when intsalling linux. So the confusing part is I have the new drivers installed, the resolution should be find but I still get a blank screen! Any Ideas still?!

This is what you should look for:
------------------------------------------------------
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
-------------------------------------------------------------------

From this section you can find out which screen setting you are using(Screen "Screen 1" 0 0). So I am using "Screen 1". Go to the Screen Section with the identifier "Screen 1".
----------------------------------------------
Section "Screen"
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
-------------------------------------------------------------------------------
From the setting we see that the default color depth is 24 bit. Then from the "Depth 24" entry we find that the resolution supported are "1024x768" "800x600" "640x480". Yours may start with 1280x1024. Try deleting it to set the default resolution to a lower level to see if it works.(Of course make a backup first. And make sure you know how to edit it again if this fails by either going to a text-based console or reboot with init 3.)

nothing will get it to work
 

Okay I have the newest Nvidia linux driver installed that worked fine. Keep in mind ive always been doing this in runlevel 3 I cant get x to work for runlevel 5. I tried removing the higher resolutions so 800x600 was first, it still goes blank when x starts.

If it's not the driver and its not my settings in the XF86Config file what could my problem be? So far Linux is NOT easy to install and get running (at least in graphical mode where all the good software is) can anyone help me here?

Hi again. Linux fans never run out of suggestions.

You could have a look in your XFree log file. This is /var/log/XFree86.0.log. A good way to examine a text file in a terminal window is to use the 'less' command:

% less /var/log/XFree86.0.log

(the name of this command is a lame unix joke. See the man page to find out more, or less). You can use the arrow keys to scroll up and down. Each line has a code at the beginning, (WW) for warning, (EE) for error etc.