VPNC Errors??
Trying to connect to my company network via my laptop(wireless) and I'm getting there errors when i run vpnc in debug mode:
Enter password for XXXXXXX @xxxxxxxxxx: vpnc version 0.3.2 S1 S2 S3 using interface tun0 S4 S4.1 S4.2 S4.3 S4.4 IKE SA selected psk+xauth-3des-md5 peer is using type 130 for NAT-Discovery payloads peer is using type 130 for NAT-Discovery payloads S4.5 NAT status: this end behind NAT? YES -- remote end behind NAT? no NAT-T mode, adding non-esp marker S4.6 S5 S5.1 S5.2 S5.3 S5.4 Enter Username and Password. S5.5 NAT-T mode, adding non-esp marker S5.2 S5.3 S5.6 NAT-T mode, adding non-esp marker S5.7 S6 NAT-T mode, adding non-esp marker got pfs setting: 0 Remote Application Version: Cisco Systems, Inc./VPN 3000 Concentrator Version 3. 6.7.F built by vmurphy on Apr 25 2003 11:02:30 got address 10.9.128.36 S7 S7.1 S7.2 NAT-T mode, adding non-esp marker S7.3 S7.4 S7.5 ---!!!!!!!!! entering phase2_fatal !!!!!!!!!--- NAT-T mode, adding non-esp marker NAT-T mode, adding non-esp marker vpnc: quick mode response rejected: INVALID_PAYLOAD_TYPE check pfs setting |
My log says this
Apr 26 15:59:00 linuxlap /USR/SBIN/CRON[6444]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly) Apr 26 16:03:10 linuxlap su: (to root) nimad on /dev/pts/1 Apr 26 16:03:10 linuxlap su: pam_unix2: session started for user root, service su Apr 26 16:03:51 linuxlap su: (to root) nimad on /dev/pts/4 Apr 26 16:03:51 linuxlap su: pam_unix2: session started for user root, service su Apr 26 16:03:58 linuxlap ifup: No configuration found for tun Apr 26 16:04:02 linuxlap ifup: No configuration found for tun0 Apr 26 16:13:33 linuxlap ifup: No configuration found for tun0 Apr 26 16:15:01 linuxlap kernel: spurious 8259A interrupt: IRQ7. Apr 26 16:35:10 linuxlap -- MARK -- |
Bump
|
bump
|
bump
|
All times are GMT -5. The time now is 08:15 PM. |