Gateway M305CRV and no 1024x768
Well, I've been searching for a solution for a while now. I tried posting on this forum about this once before, but now that thread is gone, so I'll try posting again.
I can't get my Gateway M305CRV (which has an intel 82852/855GM integrated card which uses the i810 driver) to display at 1024x768. Windows can, openSuSE10.1 apparently can't. I've tried telling it to use the vesa driver in xorg.conf, tried removing all other modelines, and tewaked with 855resolution a lot at this point. No matter what I do, I still get 800x600, despite how much I'm telling xorg to go higher. Also, sax2 has this strange habit of crashing whenever I try to change the configuration in init 3, so I've been configuring it in init 5 and then restarting the X server. current xorg.conf says this: # /.../ # SaX generated X11 config file # Created on: 2007-02-05T14:57:37-0500. # # Version: 7.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (7.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" FontPath "/opt/kde3/share/fonts" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" EndSection Section "Module" Load "glx" Load "type1" Load "extmod" Load "dbe" Load "freetype" Load "v4l" Load "dri" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "Microsoft Basic Optical Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Driver "synaptics" Identifier "Mouse[3]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "on" Option "InputFashion" "Mouse" Option "Name" "Synaptics;Touchpad" Option "Protocol" "explorerps/2" Option "SHMConfig" "on" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 305 230 HorizSync 28-60 Identifier "Monitor[0]" ModelName "1024X768@60HZ" Option "DPMS" VendorName "--> LCD" VertRefresh 50-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794 Modeline "1024x600" 47.26 1024 1064 1168 1312 600 601 604 621 Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621 Modeline "768x576" 33.74 768 792 872 976 576 577 580 596 Modeline "640x480" 23.06 640 656 720 800 480 481 484 497 Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -VSync EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "855 GM" BusID "0:2:0" Driver "i810" Identifier "Device[0]" Option "NoDDC" Screen 0 VendorName "Intel" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" InputDevice "Mouse[3]" "SendCoreEvents" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection And 855resolution -l gives this: 855resolution version 0.4, by Alain Poirier Chipset: 855GM (id=0x35808086) VBIOS type: 1 VBIOS Version: 2880 Mode 30 : 640x480, 8 bits/pixel Mode 32 : 800x600, 8 bits/pixel Mode 34 : 1024x768, 8 bits/pixel Mode 36 : 1024x768, 8 bits/pixel Mode 38 : 1280x1024, 8 bits/pixel Mode 3a : 1600x1200, 8 bits/pixel Mode 3c : 1024x768, 8 bits/pixel Mode 41 : 640x480, 16 bits/pixel Mode 43 : 800x600, 16 bits/pixel Mode 45 : 1024x768, 16 bits/pixel Mode 47 : 1024x768, 16 bits/pixel Mode 49 : 1280x1024, 16 bits/pixel Mode 4b : 1600x1200, 16 bits/pixel Mode 4d : 1024x768, 16 bits/pixel Mode 50 : 640x480, 32 bits/pixel Mode 52 : 800x600, 32 bits/pixel Mode 54 : 1024x768, 32 bits/pixel Mode 56 : 1024x768, 32 bits/pixel Mode 58 : 1280x1024, 32 bits/pixel Mode 5a : 1600x1200, 32 bits/pixel Mode 5c : 1024x768, 32 bits/pixel (yes, I've run 855resolution quite a few times at this point) Is there something I'm missing, or should I just turn this machine into a picture frame? |
All times are GMT -5. The time now is 05:05 AM. |