LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   x crashes (https://www.linuxquestions.org/questions/linux-hardware-18/x-crashes-507412/)

alexcpp 12-04-2006 12:05 PM
x crashes
 
Here are parts of my /var/log/Xorg.0.log.old:

------------------------------------------------------

==> append : to filename to view the data source
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.17-4mdv i686
Current Operating System: Linux host 2.6.17-5mdv #1 SMP Wed Sep 13
14:32:31 EDT 2006 i686
Build Date: 17 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 29 18:11:00 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "SynapticsMouse1"

..........................

(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics
Controller rev 3, Mem @ 0xeff00000/19, 0xd0000000/2

..........................

(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers/i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.6.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0

..........................

(II) v4l driver for Video4Linux
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefdfc000 - 0xefdfffff (0x4000) MX[b]
[5] -1 0 0xef9fd700 - 0xef9fd7ff (0x100) MX[b]
[6] -1 0 0xef9fd600 - 0xef9fd6ff (0x100) MX[b]

..........................

(II) I810(0): Rotating to 0 degrees
(--) RandR disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Mouse1: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) SynapticsMouse1 auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) SynapticsMouse1 touchpad found
Backtrace:
0: /usr/bin/Xorg(xf86SigHandler+0x88) [0x80c7b78]
1: [0xbfffe420]
2: /lib/i686/libc.so.6(memcpy+0x1c) [0xb7d518bc]
3: /usr/lib/xorg/modules/extensions/libglx.so [0xb7c4473a]
4: /usr/lib/dri/i915_dri.so(__driUtilUpdateDrawableInfo+0xe7) [0xa77194b7]
5: /usr/lib/dri/i915_dri.so(intelGetLock+0xdd) [0xa773352d]
6: /usr/lib/dri/i915_dri.so(intelClearWithBlit+0x6d6) [0xa77317d6]
7: /usr/lib/dri/i915_dri.so(intelClear+0x155) [0xa77356b5]
8: /usr/lib/dri/i915_dri.so(_mesa_Clear+0x18d) [0xa78748bd]
9: /usr/lib/xorg/modules/extensions/libglx.so [0xb7c213f7]
10: /usr/lib/xorg/modules/extensions/libglx.so(__glXRender+0xf1) [0xb7c19091]
11: /usr/lib/xorg/modules/extensions/libglx.so [0xb7c1e365]
12: /usr/bin/Xorg(Dispatch+0x19c) [0x80897fc]
13: /usr/bin/Xorg(main+0x49a) [0x807088a]
14: /lib/i686/libc.so.6(__libc_start_main+0xdc) [0xb7cfa75c]
15: /usr/bin/Xorg(FontFileCompleteXLFD+0xbd) [0x806fba1]
Fatal server error:
Caught signal 11. Server aborting
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) I810(0): Successfully set original devices
(WW) I810(0): Setting the original video mode instead of restoring
the saved state
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): xf86UnbindGARTMemory: unbind key 8
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(WW) I810(0): Successfully set original devices (2)

------------------------------------------------------

Here is the problem. When I try running one of the Java3D demos (https://j3d-webstart.dev.java.net/test/) it only WORKS ON THE FIRST RUN. The second time I run one of the demos X crashes . These demos work fine on windows on the same computer.

I am running Mandriva 2007 without any updates.

uname -a

Linux host 2.6.17-5mdv #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686
Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz GNU/Linux

Brian1 12-05-2006 03:22 PM
Went to the site and runned most of the demos. Many more than once. Never crashed on mine.
I am using java 1.5.0.8. Which version do you have? ' java -version '
Video is an ATI radeon 9000m and run on both the kernel ATI module and the ATI drivers. No issues either way.
Using Xorg 6.8.2
Under KDE 3.5.1

I would check your versions of the above and maybe look into upgrading.

Brian

alexcpp 12-07-2006 08:36 PM
java
 
I don't think it matters what java version this is.

# java -version

java version "1.5.0_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_09-b03)
Java HotSpot(TM) Client VM (build 1.5.0_09-b03, mixed mode, sharing)

You should look at the backtrace above. It seems to me that java is not involved. The reason why I talk about java3d demos here is because thats how I found the bug in the first place.


All times are GMT -5. The time now is 01:38 PM.