LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   The modem does not respond, help! (https://www.linuxquestions.org/questions/linux-hardware-18/the-modem-does-not-respond-help-81288/)

jupi 08-12-2003 10:20 AM

The modem does not respond, help!
 
I have a big problem with my modem under linux slackware 9.0.
The thing is when start kppp i enter all informations that has to be entered and when i press connect i get this:"Looking for modem..."->"Modem ready"->"The modem does not respond".
I have -Intel HaM Data Fax Voice- modem on com port 4,irq 3.I tried with "setserial /dev/ttyS3 irq 3 port 0xc000 uart 16550a" ,i firtst found the irq number and port 0xc000 with "cat /proc/pci" and nothing.I can't get it to work with ppp.Please help me.


:Pengy: :Pengy: :confused:

geraldallen 09-13-2003 09:29 PM

I was running Gnome and had some similar problems. Sadly to say, I took Gnome off and installed KDE. After installing KDE, I was able to configure KPPP to run my PCI modem. The strange thing, I couldn't get my modem to work with KDE properly and that was the reason I installed Gnome. When I took Gnome off and re-installed KDE, it worked perfectly or I would not be typing you this reply.

dalek 09-13-2003 10:47 PM

Try this
 
Have you tried /dev/modem. See if that works. I have to use the correct port the first time then /dev/modem after that. :scratch:

Might be worth a shot.

:D :D :D

BTW, I noticed you are from Yugoslovia, how are things going over there? We don't hear anything on the news anymore. Hope things are getting better though. :D

Madrinator 09-14-2003 01:09 AM

I had a similar problem with my Intel 536ep modem

Just play with the settings and try.

I got my modem working changing the flow control to none, and like you, before doing this I got the same messages from kppp.


All times are GMT -5. The time now is 09:41 AM.