Problem with my MITSUMI CR-48XATE CD-rewriter !
Hi,
I don't see my MITSUMI CR-48XATE CD-rewriter (Micro Solution - backpack CD-rewriter ) with 'cdrecord -scanbus but I can see it with 'lsusb' ! I tried to connect on my computer an other "similar" CD-rewriter : a TEAC - CD-rewriter from Micro Solution, and all work fine. So I suspect that the problem is related to the MITSUMI CD-rewriter itself (driver, ...). Any idea ? Thanks for your help BT # ------------------------------------- cdrecord -scanbus Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jrg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@mandrakesoft.com>. Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 Warning: Using badly designed ATAPI via /dev/hd* interface. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). scsibus1: 1,0,0 100) 'MATSHITA' 'UJDA540 ' '1.05' Removable CD-ROM # ----- this is my internal CD/DVD # ----- before FC2, I get something like this: # 0,0,0 0) 'MITSUMI ' 'CR-48XATE ' '1.0E' Removable CD-ROM # ----- which is the config. that I am looking for ....!!!!!! # ------------------------------------- lsusb Bus 001 Device 004: ID 0ac9:10ff Micro Solutions, Inc. Bus 001 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 0000:0000 # ------------------------------------- # CONFIG FedoreCore 2 Linux 2.6.7-1.494.2.2 #1 Tue Aug 3 09:39:58 EDT 2004 # ------------------------------------- |
I meet this similar thing. But after restart system , it can work normally.
I think you can try that again. |
I still have rebooted my computer several times, but with no success.
Thanks for replying, BT |
btournerie; take a close look at ur last post#1, 1st seven lines, indicate start of problem. then follow down to line 11 & 14. read very close with attention to these warnngs. if there is a work-around maybe mfg may have
them. contact mfg. can not hurt in trying but help. |
All times are GMT -5. The time now is 12:55 PM. |