Hi,

I don't see my MITSUMI CR-48XATE CD-rewriter (Micro Solution - backpack CD-rewriter ) with 'cdrecord -scanbus but I can see it with 'lsusb' ! I tried to connect on my computer an other "similar" CD-rewriter : a TEAC - CD-rewriter from Micro Solution, and all work fine. So I suspect that the problem is related to the MITSUMI CD-rewriter itself (driver, ...).

Any idea ?

Thanks for your help
BT



# -------------------------------------
cdrecord -scanbus
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jrg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
scsibus1:
1,0,0 100) 'MATSHITA' 'UJDA540 ' '1.05' Removable CD-ROM
# ----- this is my internal CD/DVD
# ----- before FC2, I get something like this:
# 0,0,0 0) 'MITSUMI ' 'CR-48XATE ' '1.0E' Removable CD-ROM
# ----- which is the config. that I am looking for ....!!!!!!
# -------------------------------------
lsusb
Bus 001 Device 004: ID 0ac9:10ff Micro Solutions, Inc.
Bus 001 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000
# -------------------------------------
# CONFIG
FedoreCore 2
Linux 2.6.7-1.494.2.2 #1 Tue Aug 3 09:39:58 EDT 2004
# -------------------------------------

I meet this similar thing. But after restart system , it can work normally.
I think you can try that again.

I still have rebooted my computer several times, but with no success.

Thanks for replying,
BT

btournerie; take a close look at ur last post#1, 1st seven lines, indicate start of problem. then follow down to line 11 & 14. read very close with attention to these warnngs. if there is a work-around maybe mfg may have
them. contact mfg. can not hurt in trying but help.