LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   No sound on barebone SS51G on Redhat 9 (https://www.linuxquestions.org/questions/linux-hardware-18/no-sound-on-barebone-ss51g-on-redhat-9-a-76265/)

bartsimp 07-27-2003 01:26 AM
No sound on barebone SS51G on Redhat 9
 
Hi, I'm having trouble with my shuttle Barebone SS51G with sound. It doesn't work at all.
I've installed all alsa modules I could find on freshrpms.net.

Here is I hope some useful information:
-----
[root@barebone rpms]# dmesg |gedit
Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdd=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1697.143 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 511348k/524224k available (1347k kernel code, 10312k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb530, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
PCI: Found IRQ 11 for device 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS651 ATA 133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdcio, hddMA
hda: ST380021A, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdd: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 147k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe084a000, IRQ 9
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xe084c000, IRQ 5
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xe084e000, IRQ 10
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
ehci-hcd 00:03.3: PCI device 1039:7002 (Silicon Integrated Systems [SiS])
ehci-hcd 00:03.3: irq 11, pci mem e0856000
usb.c: new USB bus registered, assigned bus number 4
PCI: 00:03.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:03.3 PCI cache line size corrected to 128.
ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Adding Swap: 522072k swap-space (priority -1)
hub.c: new USB device 00:03.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x6bd/0x2061) is not claimed by any active driver.
hub.c: new USB device 00:03.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x471/0x311) is not claimed by any active driver.
hub.c: new USB device 00:03.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x4b8/0x1) is not claimed by any active driver.
hub.c: new USB device 00:03.0-2, assigned address 3
usb.c: USB device 3 (vend/prod 0xa12/0x1) is not claimed by any active driver.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: registered new driver usbscanner
scanner.c: 0.4.9:USB Scanner Driver
Linux video capture interface: v1.00
ohci1394: $Rev: 693 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 9 for device 00:10.0
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e010a000-e010a7ff] Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.8 loaded.
pwc Also supports the Askey VC010, Logitech Quickcam 3000 Pro, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usb.c: registered new driver Philips webcam
pwc Philips PCVC740K (ToUCam Pro) USB webcam detected.
pwc Registered as /dev/video0.
usb.c: registered new driver audio
ieee1394: Host added: Node[00:1023] GUID[00301bab00007998] [Linux OHCI-1394]
usb.c: registered new driver usblp
usbaudio: device 3 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces
usbaudio: device 3 interface 2 altsetting 0 FORMAT_TYPE descriptor not found
usbaudio: device 3 interface 2 altsetting 1 channels 1 framesize 2 configured
usbaudio: valid input sample rate 44100
usbaudio: device 3 interface 2 altsetting 1: format 0x00000010 sratelo 44100 sratehi 44100 attributes 0x00
usbaudio: device 3 interface 2 altsetting 2 channels 1 framesize 2 configured
usbaudio: valid input sample rate 22050
usbaudio: device 3 interface 2 altsetting 2: format 0x00000010 sratelo 22050 sratehi 22050 attributes 0x00
usbaudio: device 3 interface 2 altsetting 3 channels 1 framesize 2 configured
usbaudio: valid input sample rate 11025
usbaudio: device 3 interface 2 altsetting 3: format 0x00000010 sratelo 11025 sratehi 11025 attributes 0x00
usbaudio: device 3 interface 2 altsetting 4 channels 1 framesize 2 configured
usbaudio: valid input sample rate 8000
usbaudio: device 3 interface 2 altsetting 4: format 0x00000010 sratelo 8000 sratehi 8000 attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 3 type 0x0101
usbaudio: warning: found 1 of 0 logical channels.
usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine.
usbaudio: registered mixer 14,0
usb_audio_parsecontrol: usb_audio_state at df4e4f00
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0001
audio.c: v1.0.0:USB Audio Class driver
printer.c: v0.11: USB Printer Device Class driver
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-40125S Rev: ZS0N
Type: CD-ROM ANSI SCSI revision: 02
BlueZ Core ver 2.2 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ HCI USB driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
usb.c: registered new driver hci_usb
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 192x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 10 for device 00:0f.0
PCI: Sharing IRQ 10 with 00:02.7
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xe0944000, 00:30:1b:ab:79:34, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
mtrr: no more MTRRs available
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected SiS 651 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
[drm] AGP 0.99 on SiS @ 0xd0000000 128MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
mtrr: no more MTRRs available
spurious 8259A interrupt: IRQ7.
sr0: CDROM not ready. Make sure there is a disc in the drive.
usbaudio: dma timed out??
usbaudio: dma timed out??
-----

BTW, usb audio is my webcam

----
[root@barebone rpms]# lspci |gedit
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS651 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 04)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY
----

-----[root@barebone rpms]# lsmod |gedit
Module Size Used by Not tainted
radeon 116132 3
agpgart 47776 3
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
ppp_synctty 7904 0 (unused)
ppp_async 9440 1
ppp_generic 24444 3 [ppp_synctty ppp_async]
slhc 6740 0 [ppp_generic]
8139too 18088 1
mii 3976 0 [8139too]
ipt_REJECT 3928 6 (autoclean)
iptable_filter 2412 1 (autoclean)
ip_tables 15096 2 [ipt_REJECT iptable_filter]
sg 36524 0 (autoclean)
sr_mod 18136 0 (autoclean)
hci_usb 8920 0 (unused)
bluez 40132 1 [hci_usb]
ide-scsi 12208 0
scsi_mod 107160 3 [sg sr_mod ide-scsi]
ide-cd 35708 0
cdrom 33728 0 [sr_mod ide-cd]
printer 8928 0
audio 46648 1
soundcore 6404 2 [audio]
pwc 47688 0 (unused)
ohci1394 20168 0 (unused)
ieee1394 48780 0 [ohci1394]
videodev 8288 1 [pwc]
scanner 11224 0 (unused)
keybdev 2944 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5856 0 [keybdev mousedev hid]
ehci-hcd 19976 0 (unused)
usb-ohci 21480 0 (unused)
usbcore 78784 1 [hci_usb printer audio pwc scanner hid ehci-hcd usb-ohci]
ext3 70784 2
jbd 51892 2 [ext3]
-----

And I also tried instructions from alsa and it gives
[root@barebone rpms]# modprobe snd-intel8x0;modprobe snd-pcm-oss;modprobe snd-mixer-oss;modprobe snd-seq-oss
modprobe: Can't locate module snd-intel8x0
modprobe: Can't locate module snd-pcm-oss
modprobe: Can't locate module snd-mixer-oss
modprobe: Can't locate module snd-seq-oss
[root@barebone rpms]#

These instructions can be found at als-project for SIS7012.
If anybody can help, it will be great (I've also read the other threads but this specific topic isn't treated and the proposed solutions don't work.

bartsimp 07-28-2003 01:30 PM
The topic was also on http://www.linuxquestions.org/questi...283#post393283
I closed it to point to this new one.

Nobody?

bartsimp 07-29-2003 08:49 AM
a small up...

fancypiper 07-29-2003 08:52 AM
Is kernel-source installed and you have the link /usr/src/linux that points to it?

# Compiling/installing kernel modules
You will need to have installed:
1. The developmental packages (compiler)
2. The kernel source code that matches your running kernel
3. The module source or install code

Check out your system and look under the hood and see if you installed the stuff you need to do the job. Open an x terminal and type in this sequence of commands to see what kernel we are running and see if you have the kernel source installed:
Code:
[fancy@tinwhistle phil]$ su -
Password:
[root@tinwhistle root]# uname -r
2.4.18-3
I am running kernel version 2.4.18-3. Do I have the proper source code?
Code:
[root@tinwhistle root]# cd /usr/src
[root@tinwhistle src]# ls -alc
total 3
drwxr-xr-x    4 root    root          136 Jun 12 14:53 .
drwxr-xr-x  16 root    root          424 Jun  4 12:04 ..
lrwxrwxrwx    1 root    root          14 Jun  4 12:11 linux-2.4 -> linux-2.4.18-3
drwxr-xr-x  16 root    root          584 Jun  4 12:11 linux-2.4.18-3
drwxr-xr-x    7 root    root          168 Jun  4 12:08 redhat
[root@tinwhistle src]#
I do have the same kernel version source code installed in the directory /usr/src/linux-2.4.18-3 and there is a symbolic link named linux-2.4 pointing to it.

If you don't see something similiar to this (but in color), you will need to install the kernel source.

NOTE: I noticed that Red Hat didn't make the symbolic link /usr/src/linux that all of the INSTALL files that I have read mentioned that I need, so I may as well make one now to save editing the files in the source code to install.So, I'll make it just now:
Code:
[root@tinwhistle src]# ln -s linux-2.4.18-3 linux       
[root@tinwhistle src]# ls -alc
total 3
drwxr-xr-x    4 root    root          160 Jun 12 15:46 .
drwxr-xr-x  16 root    root          424 Jun  4 12:04 ..
lrwxrwxrwx    1 root    root          14 Jun 12 15:46 linux -> linux-2.4.18-3
lrwxrwxrwx    1 root    root          14 Jun  4 12:11 linux-2.4 -> linux-2.4.18-3
drwxr-xr-x  16 root    root          584 Jun  4 12:11 linux-2.4.18-3
drwxr-xr-x    7 root    root          168 Jun  4 12:08 redhat
[root@tinwhistle src]#
Ah, there it is, so that's done.

Next, did I install the compiler?
Code:
[root@tinwhistle src]# gcc -v         
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs
gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-113)
[root@tinwhistle src]#
Yes, I have a compiler installed.

If you don't have those two things installed, you have to install them first off your install CD.

If they are installed, download the source and happy comiling. :tisk: Make sure you carefully read the README and INSTALL files after extracting and before compiling/installing. :study:

ALSA is muted by default. Did you turn up stuff with your mixer?

# Red Hat links
Red Hat Linux Manuals
Get your mp3 support here
Maximum RPM
rpmfind
Easier software management: apt4rpm - Red Carpet
Red Hat 8.0 Tips & Tricks

# Red Hhat 7.3 down configuration commands
setup leads to several configuration tools

# Red Hat 7.3 up configuration commands
Configure soundcard:
redhat-config-soundcard
Configure X server:
redhat-config-xfree86
Configure network:
redhat-config-network
Manage software:
redhat-config-packages

# Handling NTFS
New Technology FileSystem (NTFS) HOWTOs
Linux NTFS project

vasudevadas 07-29-2003 09:04 AM
Does sndconfig tell you that your sound card is currently disabled?

If so, you need to either patch your kernel with the ACPI patch, or get the patch to kernel version 2.4.22 from www.kernel.org and compile that (I had trouble with the same sound card and that is what I did).

Once you've compiled the kernel, you should disable the ALSA service and edit your /etc/modules.conf to comment out all sound-related lines and add:

alias sound i810_audio

Reboot and you should hear sound.

If this stops your CD drive from working I can probably help you there too.

mobileMike 07-31-2003 02:28 PM
I have the same system except that I have added a different video card. Anyway, I had to go into the Preferences-Sound from the Redhat menu and select "Enable sound server startup" this was not selected by default.

- mike

bartsimp 08-03-2003 12:45 PM
Ok, I'm dumb stupid. Since the integrated Redhat sound detection system haddn't been working, I thought sndconfig would also fail.
Before going into re-compiling a kernel I fired an apt-get install sndconfig, launched it and all was detected immediately!!!

so plain old sndconfig still rocks.

Thanks all for you complete answers.

redbeardca 08-28-2003 06:13 PM
I having the same problem.
How ever I have it narrowed down to the web cam mic on your 740k
is the confict.

I you remove the cam your soud should work. (reboot/Choose Remove from boot up)

How ever I want my new audigy 2 sound to work with my camera. The best I've got so far is to
edit (vi /etc/modules.conf) and change alias sound-slot-0 audigy to alias sound-slot-1 audigy. this seems to load all sound properly in gnome without error. how ever still no sound. I think I have tell every program to use the 2nd mixer(/dev/mixer1) or some thing. Please email me if this helps


All times are GMT -5. The time now is 09:29 PM.